upHere GPU Holder,Graphics Card GPU Support Video Card Holder Bracket, Video Card Sag Holder/Holster Bracket(ARGB LED),G276ARGB

Picked up the upHere GPU brace support because my new graphics card was starting to sag a bit after installing it into my gaming rig. With GPUs getting bigger and heavier these days, I figured it was better to be safe than sorry — didn’t want it stressing the motherboard or damaging the PCIe slot over time. First impressions were brilliant. It’s properly solid metal construction, no flimsy plastic nonsense. The base is weighted nicely so it doesn’t wobble around once placed inside the case, and it’s adjustable too, which made it dead easy to line up just right under the card. The design is simple but smart — a nice black finish that doesn’t look out of place, especially if you’ve got a black or dark-coloured case. Some GPU braces look dead ugly, but this one just blends in nicely and keeps everything looking clean and professional. Installation took literally a few minutes — adjust the height, place it under the GPU, tighten it down and job done. Since fitting it, the sagging has completely gone. Card sits perfectly horizontal now, and it’s clearly taking a lot of the strain off the motherboard, which gives a lot of peace of mind. Only tiny thing is that if you have a particularly cramped or fancy RGB-heavy setup, you might have to fiddle about a little to get it looking neat, but honestly, it’s not a big deal. For the price, this thing’s a no-brainer. Solid, easy to use and does exactly what it promises. If you’ve got a heavy GPU and you care about protecting your gear, definitely pick one of these up. Highly recommended!

Looks good, seems pretty sturdy and does the job. Cable length could be a little longer but other than that all good. Doesnt come with the logo shown in the photo but im glad as its much smaller! Easy to fit.

Good item, works well on my Gigabye RX 9070 XT 16Gb OC and you get small sponge pads where the brace touches the GPU so it won't damage it. It's very sturdy and doesn't move at all once installed. It's simple to install (there is no instructions) but it takes up 3 pcie slots at the back of the PC case so make sure you have space for it before you buy. -1 star as the company logo on it appears to be just some random letter d. I've seen review images of different words or icons on it as well so watch out for that. I'm considering removing the lettering on mine completely. It's pretty pricey for what it is at £9.99, but I would consider the price worth it so your motherboard doesn't get damaged by GPU sag

Got this to help support an XFX Speedster Merc 6950xt. Honestly for such a monsterous GPU, these are built pretty solid and have zero sag, I got this as a precautionary measure which I highly doubt was needed with my GPU. Looks good though with the extra RGB lighting. Looks tiny compared to my GPU but it reaches far enough in that it is definitely supporting the GPU should it ever sag. Very easy to install with the ability to piggy back off existing argb peripherals. Good value for money. Great option for those with bottom fans that can't use the cheaper telescopic stick supports.

I don't really have a problem with my dual fan, relatively short, RTX 3060 but it's fighting gravity and this brace is cheap so I thought I'd give it a try. Firstly, it looks surprisingly good for the money. It's well made and the RGB is bright and colourful. It's easy to install (screwdriver only) BUT you do need spare slots below your GPU because this screws into those spare slots. I managed to retain the slot covers by screwing into the brace AND the slot covers. I bought the SATA version (to power RGB) because I'm out of fan headers, which means that I can't control or sync the RGB with my other stuff. But I'm happy with it. Once installed, it looks great, producing a nice long slice of colourful RGB right below my graphics card. As I wrote, my GPU wasn't sagging but I'm sure that this would help if it was. Great value for money.

Bought this for my RTX 2080Ti as it was starting to sag due to the weight of it. First off the logo on mine was all scrambled up for some reason but I'll just stick a Geforce RTX decal over it, the support itself is pretty sturdy though, and seems well made, at first though I wasn't sure it was going to support the card because my PC was on its side and the arm seemed to slip out of place slightly, but I can happily say once the pc was upright and the weight of the card was bearing down on it, it doesn't move at all. The ARGB lights offer a really nice bit of design to the interior and work well too.

Delivery was next day. Easy to install and connect the RGB to the motherboard and existing RGB lights. A very strong and sturdy GPU support. I believe it's made of an alloy metal of some sort.

After spending a small fortune getting a new GPU, i needed a support, so, having brought upHere RGB Fans before and being pleased with the quality, I decided to get one of their RGB metal GPU support bars. Well, straight out ofthe box, installed and the RGB LED's were not working, I tested the voltage on the motherboard ( that was fine ) so the support bar lights were broken. Now £18 isnt a lot of money, but, if i just wanted a metal support bar i could have made one for about £1, but i liked the idea of the RGB, It's clearly not been tested before sale. I try to support smaller companies, because the cost of high end brands is just to much for what they are selling, be it AIO's, RGB fans, ARGB LED's etc etc. I'm not saying dont buy upHere products, just wish the Q.C. was better, it would have caught this before sending out.

If you want a clean and discrete support bracket, this is it. No problem supporting an Asus RTX 5070 TI Strix OC.

Super easy install. Hardest part is keeping your slot covers in place. Looks great and feels nice and sturdy. Honestly overkill for my RTX5070 but it looks sweet.

تركيبه صعب والمشكلة انه ضعيف ومع الوقت يرتخي مسمار التثبيت في على الكيس والي يشيل كرت الشاشة

I bought this GPU bracket hoping to properly support my RTX 5070 in my Lian Li Lancool II case. Unfortunately, the left side where it attaches to the case is too bulky, which forces me to mount it one row lower. Doing this makes the adjustable part too short to reach the GPU, so it doesn’t really serve its purpose. I had to drill extra holes in my case to make it fit. Also, I’ve lost access to the three PCI slots below the GPU. On the bright side, it’s colorful and has lights, so it looks nice. Overall, it’s functional if you’re willing to modify your case, but the design could be much better.

Calidad precio, los materiales se sienten de buena calidad y cumple su función, además de que el rgb se puede sincronizar con la iluminación rgb de la tarjeta madre.