4mm Banana Plugs Right Angle 6 Pairs, 24k Gold Plated 90 Degree Speaker Connector (12Pcs)

If you have the room to do a 90 degree turn off your amp's five way binding posts, these banana connector will save you at least 1 1/2 inches of back room. You can easily fit 14 gauge wires. The dual nuts make for a very sturdy connection and likely better conduction. The overall design also eliminates the possibility of shorts -something that can be an issue with 99% of all audio amplifiers. The banana proper is not solid, instead it's made from a number of "fingers" that compress inwards as you push into the connection... so it makes a good solid connection and will not slip out on its own or when you pull on the cable while dressing its path. Now then, It is not too tight either, so it's easy enough to push and pull when you need it. I actually like the way the plastic sleeve fits over the connector and how the connection is made that I would like to get these in a straight connector as well. A very nice design, and I've been playing with speaker cables since, oh, the early 70s...

Often the backs of your speaker or amp are close to the wall and the right angle banana plug avoids taking up more space than necessary behind the speaker or amp. These seem to be made of gold plated brass with two brass set screws in each plug to firmly hold the wire end. They come with insulating sleeves that push up over the part that gets the wire to avoid the possibility of shorting out the signals. The insulating sleeves like the picture shows come red and black to indicate the polarity. The insulating sleeve appear to be a somewhat stretchy PVC sleeve. If you use large wire, especially if you tin the ends with solder, the set screw heads stick up a bit and it’s not that easy to slide the insulating sleeves up. On the other hand they are not liable to slip off. If you cannot get the sleeves over the screw heads you might need to use appropriately colored tape or shrink tubing. I used 14 gage speaker wire that I tinned the ends with solder and with some difficulty I was able to slide the insulating sleeves up onto the end. These bananas are made to fit pretty tightly into the typical binding post end. That ensures a good connection but you do have to push with some force to insert them. Mercifully the set screws are already screwed into the fitting, you just have to unscrew them enough to insert your wire. I bought some straight bananas that came with all the set screws in a little bag. What a pain that was with several speaker connections and fat fingers. But these do not have that issue. The quality seems excellent for these right angle bananas and they are made to accommodate larger wires And make a very good connection to the typical binding post center hole.

Good Quality Right Angle plugs, worked great for my AV Receiver and the large diameter speaker wire I use. I had no problems driving the two offset screws in flush with the barrel and sliding on the insulator aftewards. These are not the most sophisticated plugs but they reasonable value for money. Important to note that the plugs are not insulated over the back ends so care must be taken not to accidentally short them when energized. They come packaged securely with spare screws in case your lose one or two. I'd definitely buy these again for another AV install.

These worked well for wiring our speakers to our receiver using 12 AWG stranded wire. The two fastening screws on each made secure mechanical and electrical connection to the wire. The plugs were sturdy and fit snugly into the jacks on the speakers and receiver making good electrical connection. In the past, I fastened the wire using the binding posts on the spkrs and receiver, but gave this a try this time and am satisfied with the results. .

Used these gold connectors with my speaker wire setup for Bose 151s. They fit snugly, made installation easy, and help deliver clean, crisp sound. Great quality and no signal loss.

Great connectors and well made. I have used these over and over for my system and my sons, with no problems

Bought these to replace ends on speaker cables, one pair of which had its ends broken off because the speaker had been pushed up against a baseboard. The right angle design solved this breakage problem. These are easy to put on, and look neat.

I used 12 pairs for our new audio system and they work very well. I was looking for a right angle banana plug and was glad I choose these.

Good and satisfied, but price feel a bit expensive

Ottimo prodotto, non è la prima volta che lo acquisto.

Gute Stecker . Preiswert und schnell geliefert.

Ces fiches banane sont de très bonne qualité, je les ai montées sur du "Real Câble" de section de 3mm pour Haut-Parleurs Très Haute-Fidélité. J'ai sélectionné ces fiches coudées à 90° gainées de plastique moulant pour la connectique de mes Enceintes Triangle afin qu'elles ne risquent pas de générer un court-circuit si toutefois elles venaient à se toucher au dos des enceintes. De plus leur angle de 90° permet au câble en cuivre particulièrement lourd de les libérer des forces supplémentaires qui pourraient occasionner une cassure de la fiche si celle-ci était droite et non pas coudée. (Voir Photo) N'hésitez pas avant de les monter sur les câbles à insérer préalablement chaque fiche une première fois dans un bornier type qui va accueillir la fiche ultérieurement une fois reliée au câble pour la préformer (roder) afin de faciliter son insertion ultérieure, car les fiches neuves sont assez difficiles à insérer la première fois et il y a un risque de les abimer si l'on force trop ou surtout de travers, ensuite la 2ème fois et les suivantes ça va tout seul. Vous comprendrez-mieux lorsque vous aurez procédé. Attention également de bien les aligner lorsque vous les vissez sur le câble afin qu'elles soient parfaitement positionnées en face des borniers et éviter de tortionner le câble si vous les avez vissées comme des fiches droites sans vous soucier de leur orientation. J'espère que ce commentaire vous sera bien utile et vous évitera des erreurs inutiles !

I'm writing this review the day i got these in the post so maybe take what im about to say with a pinch of salt but i bought these with the purpose to connect to the back of my SVS height speakers as their against the ceiling and leave no room for traditional banana plugs plus i don't like the bare wire option i can only say they did the job great but the comments about the quality i can understand if you were in anyway rough these they would break in a heartbeat so be careful.