Goplus A/C AC Flush Kit, Air Conditioner System Flush Gun Kit R134 R12 R22 R410 R404, AC Flushing Kit

Fonctionne très bien pour le prix. Utilisé pour nettoyer conduites de climatiseur de voitures nouvelle installation. NOTE: Porter des lunettes de protection!!!

This was invaluable for doing my car a/c system. Using the proper fluid to clean out the lines the a/c works perfectly and will freeze you out. would recommend to anyone..

materiel de qualité kit complet MERCI

This flush kit is nicer than I expected for the cost. Fit and finish is good quality and it's easy to assemble. The tank was clean but I still ran some flush solvent through it before using it on my AC system. This is good practice and particularly important if you're flushing either the evaporator or condenser. The Goplus is easy to use. The main thing is to make certain the tip is properly inserted, and you have a good seal, before you squeeze the trigger. If you do otherwise you'll "flush" a lot more than you intended. I used it with highly volatile solvent and had no problem with it degrading the rubber tip. I also was impressed that a spare rubber tip and O-ring were included. There was also a quick-fit air adapter included. Unfortunately, the adapter included isn't the one most DIYers will need. If you have a compressor you likely have one laying around anyway. So.......bottom line; good product at a good price.

I just replaced pretty much my entire AC system in my 2007 ram 2500 5.9L cummins. I've never done AC work like this in a car. I replaced the compressor, orifice tube, drier/accumulator, and condenser. I used this kit to flush the evaporator and the 2 hard lines being reused. It is a nice kit for the money, no complaints really. Easy to use, etc. I used Supercool Flash Flush (solvent based, not oil based - leaves no residue). This worked great for me, the only issue was it uses WAY more flush fluid than I anticipated. I bought two 32 oz bottles thinking thatd be plenty, and I used the entire first bottle in about 10 seconds! I ended up screening/filtering and reusing much of it so I could flush each part multiple times. The first flush on my evaporator came out dirty/grey so I discarded it, but everything else came out clear so I filtered reused it. Just something to keep in mind. I think blew compressed air through the parts to dry them out. The flush fluid I used evaporated very quickly (I spilled some on the shop floor) and didn't leave any residue, I highly recommend it also.