GOLDEN FIELD MAGE-U Mint Green Computer Case Gaming PC ATX/MATX/ITX Case Mid Tower with 3 Colorful LED Fans Tempered Class Side Panel, Mesh Front Panel (Blue-Green)

The first case i bought was the biggest regret in my eyes, you could barely cable manage on it, the airflow was restricting where my PC would overheat and shut off, and the RGB is controlled by a button, and only that. Now i’ve moved on from that, i built myself a new PC with better specs and a way better CPU Cooler… and a lot more RGB, and because of how many wires that RGB has, i decided that i really needed a new case. I was originally going to buy a Musetex case, but the fans had no PWM, and their mesh case felt bland. Then I saw this. It seemed absolutely perfect, so i bought it. The PC Case came with a few things, like a Piezo speaker for some reason, motherboard screws, extra standoffs, and the case itself. I checked it out before building on it, and here’s a few things i noticed: - These fans are pretty cheap and aren’t really designed much more than to be flashy fans that blow some air, i wouldn’t recommend using them - The fans aren’t mounted correctly (the top half is screwed to where the 140mm fans would be screwed, the fans themselves are 120mm), i assume this is just laziness or poor training in the factory, i don’t know, i’ve never seen a case being manufactured before. - There’s a massive metal piece on the back-side panel, why? It’s not easy to screw on to the case, and it just adds an extra step - The PCIE covers are one-time use, you can only remove them - The HDD Mounting system is poorly designed and cheap, no rubber pads, half of the screw holes for the 2nd drive are blocked by the legs the Hard Drive mounts stand up in - Golden Field Logo is painted on, you can’t easily remove it Now building on the case is fairly easy, the back-side panel space isn’t super spacious, but it isn’t tight and impossible to shut the back-side panel. I could actually do some cable management, even if it was lackluster. Installing the I.O Shield and then the motherboard was easy for me at least. I was able to screw in on every screw hole of my motherboard, which i couldn’t do before on my last case. The front panel is incredibly easy to remove and so installing the fans on the front were painless, and the Sliding glass door wasn’t as bad as i thought it would be. My only issue was i broke out the wrong PCIE Cover. After building the PC Together, the Case looks as great as i thought it would be. While it might look a bit basic, there’s a lot i love about the design. The extremely boxy design, the predictable diamond pattern mesh, the border surrounding the mesh, the cutouts at the top and bottom of the front panel that doesn’t seem to have a purpose but looks nice anyways, and the chrome legs. Oh, and with RGB Fans, the fans reflects a bit of light off the mesh, and you get this glowing look. This case is definitely designed to have an appealing look, and that shows with it’s multiple colors. The case has enough vents to push a lot of air, and i haven’t gotten much dust accumulation yet. Just remove the top mesh panel, there’s no reason it should exist, it’s literally just blowing air out. Overall, I love the look of this case, they definitely cut some corners, but the overall product is great, and i love the look of it. It definitely adds something to my setup.

I was very sceptical in buying this case because of the lack of reviews. But I purchased it and am very happy. It’s a little bigger than my previous case and has more airflow. I highly recommend it. I will add a photo of it on soon. It has pretty pastel thin lights which I love so much. Easy set up and cord management is guaranteed. UPDATE: 3 Feb 2021 The case is still amazing. I switched the pastel lights above to apply a radiator. Super easy switching if you’re getting the radiator like mine or similar. I applied a different fan from Arctic underneath the radiator. Basically my point is if you want to remove the lights its no issue :) still a great case. I still recommend. The updated photographs are there now. Last 2.

First off, the majority of the reviews for this case say that if you have a motherboard with a preinstalled IO shield, it will not fit the case, and they're right. However, it doesn't mean the motherboard won't fit in the case at all. It leaves out a very minimal gap between the case and the io panel that's honestly hardly noticeable. If you are a looking for a mint pc case like i have, this is a small price to pay. You can see for yourself in my photos. This case is beautiful and very clean looking. I am glad i went out on a whim on buying this case because i almost let the reviews fool me.

Overall not a terrible case. Came with alot of mounting screws for ssd and hdd. Case metal is a little flimsy looking around fan mounts. The 3 fans it comes with are 3 pin rgb but are not controllable. They stay the same rgb pattern and same fan speed. May be a little loud for some people. Plenty of room for cable management, has 8 places total to mount fans. At the price though it may be worth spending a little more and get something with a little better quality but its not terrible for price.

noise level for the fans is pretty good! was super nervous at first cause my io shield wasn’t fitting properly, but i got it to fit just fine! keep in mind that if you have an ATX mb you may want to consider a different case as it is a bit difficult to install the motherboard. cable management is quite the squeeze as well as there’s not much room in the back. other than that it’s a really great case with great quality.

I bought this case when it only had one review, so I was a little nervous. I took the risk because I liked the aesthetic of the case a lot, and I'm glad I did! I love the panel that hides your cables because it makes cable management less of an issue (in other words - it allowed me to be a little lazier). The fans' RGB isn't customizable, but I like the look of the rainbow, even though it's a little bright, and the fans can be replaced if you prefer another fan. The case is large and fits everything in it easily), though my PSU's size made some of the cables difficult to place neatly. The airflow seems good and so far I have no complaints! It looks amazing and seems to be pretty good quality - arrived with no dents, scuffs, or marks. Would buy again! Update 12/20/21: The case is still awesome, but there are two issues. First, the bottom fan's RGB is now messed up - the top two are still rainbow, but now the bottom one is an ugly mix of red and green. I can't change it at all, but I was going to get new fans anyways, so it's not a big deal. It's not worth docking a point for since I think getting higher end fans is a worthy investment that I would make regardless of if this happened or not. Secondly, the restart button no longer restarts my computer. I'm not sure what the cause of this is, but again, it's not a function I use often enough to care about too much. Just a heads up!

Building a PC with my girlfriend and wanted a flashy pink case, but did not find a lot of good options. This is the pink version of a standard case you might get with other builds. Decent space, decent cable management & the fans do look nice. After some difficulty setting it up, customer service was very helpful over email. I would recommend to others looking for a pink case.

(long post with lots of info) (original photos last) UPDATE: I bought another one because we wanted to have matching cases. The second one was in black. We knew it was more than likely going to have the same issues as the mint one, however there were a few more issues added on. It seems like the mint case was made at a different time than the black one- it had a few newer/better features and less quirks. The biggest issues we had with the black case was that the back panel for cable management is extremely snug. We both had to wrestle with the case to get it open and closing it was just as much of a pain. The handle on the glass panel was also different than the mint one. The black one still had wonky holes and things had to be forced to fit. To the fan issue not being lined up- if you mount the fans on the inside of the case instead of the outside where the manufacture puts (for whatever stupid reason) then they actually line up with the holes and produce proper airflow. We also replaced the fans and I really suggest doing that. The preinstalled fans were extremely bright. The combination of the colors just produced a bright white light. The new RGB fans I put in much quieter and subtle (thermaltake Riing 12). --ORIGINAL POST-- I bought this case purely based on the color. Finding a chonky case that's not black, white, or pink has been pretty hard- especially with a mesh front. Pros- Good Air Flow Good Cable Management Roomy Cool Color Tempered Glass Window Cons- Manufacturing errors Misaligned holes Misaligned fans (which supposedly can be corrected by putting the fans inside the case, will attempt later) Non-customizable LED fans Built-in Fans Rattle Paint easily scratched Screws are pretty cheap and soft. Overall I was pleased with how the case looks and it was a decently easy built with all the room. But the big issues (and what took me the longest to deal with when building) was that holes and ports weren't milled in the correct spot. Everything lines up slightly off. I'll be going in again with new parts soon and will update pictures of the build process to see if things still like up wonky. I feel like you're paying way too much for the color of this case. There are more cases that are similar to this one for a cheaper price.

I recommend this computer case! I was hoping for more of a pastel pink than one that jumps out at you, but it looks beautiful nonetheless. I've had no problems with it so far, and it came at the exact time it was supposed to. They packaged it very well and ensured that nothing would get broken, like the glass sliding door. There was also a piece of plastic on the glass to ensure it wouldn't get scratched, and it opens quickly and very well. There are three USB ports, a mic, a headphone and two buttons to turn on both the power and the headphones. I haven't yet installed anything because I'm waiting on parts to come in but if you're looking for a pink case that's good quality I would definitely recommend. It's very clean and even allows lights from led fans to poke through.

Sehr schöne Farbe, wie erwartet.

Tiene un buen espacio para una correcta gestión de cables y además es de un color que destaca bastante por el RGB, recomendadisimo

This case is just wow.. Absolutely amazing im thrown away it has amazing airflow and keeps my high end gaming pc cool under heavy load, the support for cable management is also amazing, there is just one downside the back brackets for the gpu are slightly to thick causing my display port to be lose and occasionally drop connection with my monitor

Très beau boitier, couleur peu commune. Fourni avec les trois ventilateurs avants. Je ne regrette point mon achat, enchantée !