Mcbazel 18 in 1 Replacement Repair Kit for N-Switch Joy-Con with Screwdrivers Opening Tool, 3D Left Right Analog Joysticks, Buckle Lock, Charging Port Slider, Button Sync Flex Cable Set (NOT for Switch 2)

This kit almost has everything you need to rebuild your switch joycons. The kit has two sizes of screwdrivers, one for the 4 screws to open the joycon, one for the inner smaller screws which is magnetic which is very helpful with the small screws. It has a small tweezer, but wish it was a little grippier, the super small ribbon cables are hard as it is to get back into their slots. But it comes with ribbon wires connected to the outer connection rail, which you get two. also two ribbons for the 4 small leds that you see on the inner connection rail. Both of these ribbons get very brittle when old, like mine were orginal joycons when the switch came out. When i just lifted the covers apart gently, they just broke in half they were so brittle. So was very happy those were included. Kit comes with 2 joysticks as well. What i think this kit should have is 2 batteries, but i just ordered them elsewhere. You can watch a youtube to see what you need to do, it's not rocket science, but since the cables are all super small, if you're not good with small delicate things, this isn't for you. Basically the ribbon connectors have a small flip up piece usually in front or on top of the connector. Flip that up and slide the ribbon out. the hard part is sliding the super small ribbon back in, it's hard to judge if the ribbon is in far enough, but just slide it in as far as you can and flip the lock on the ribbon connector down and if it locks the ribbon in place, it's probably in good enough. The Right controller has a small antenna for the wireless connection, but the battery tray has 3 screws holding it down which you have to take off to get to the joysticks. The joysticks have 2 screws which is easy to replace. The ribbon cable on the joystick is again, small and has a small lock lever on the top which you flip up and slide out. You just have to be careful for the small ribbons that hold the battery tray, those have no cracked on me yet and seem more flexible. But if you break those, you will need to buy another joycon. So overall, it's a great kit, i was able to do 4 joycons in a few hours and that's taking my super sweet time. Oh yeah, the battery has a very small gray connector, this connector just pushes down and stays in place. It's vry small as well so just hold it with the small tweezers and push it down with a pencil eraser or something small. So overall it's all doable, just tedious working with the small cables. It also comes with a couple of prying tools and a brush i guess to clean off dust. So overall, this kit is a 5 for now as it has everything i needed to rebuild most of the joycon.

Nice and simple, inexpensive and relatively complete joycon repair / joystick & rail replacement kit! Comes with required tools, extra security (y) screws, standard OEM quality (not hall effect) thumb sticks, both joycon rails and sensor strips, and even a set of metal clips for those inclined to swap those out. Hint! The metal clips are optional, and only good if you don't drip your seotch often. The built in plastic ones have more of a give and can absorb impact of any potential falls, so your mileage may vary. :) So far, swap was good, everything works very well and slides in nice and snug - a bit tighter than the original rails, which is not a bad thing if you ask me. Would buy again as these parts take a lot of wear and tear.

This repair kit delivers exactly what it promises. One of my Joy-Cons had issues with the button sync and the SL/SR buttons, which meant I couldn’t use it individually. I decided to replace those components using this kit and went ahead and swapped out the joysticks too to fix the stick drift I’d been dealing with. Everything worked flawlessly afterward, and my Joy-Con feels like new! If you’re handy or comfortable with small repairs, this is a great, straightforward way to fix common Joy-Con problems without spending a ton on replacements. The kit includes everything you need, from screwdrivers to replacement parts, which made the process smooth. One word of caution: the ribbon cables are delicate (note for any ribbon cable not just this product), so take your time and handle them gently. If you’re not super familiar with electronics, it’s worth watching a tutorial or two to make sure you don’t accidentally damage anything. Overall, this is a fantastic kit for anyone wanting to fix their Joy-Cons themselves. It’s affordable, easy to use, and gets the job done!

I only fixed a left joycon and had leftover parts to repair a right joycon should the need arise. This worked well to repair my kids joycon which was suffering from thumbstick drift. I used all the parts for the left joycon including the new side buttons and upgraded metal locks. It helps if you already possess some phone repair skills. Repairing the joycom is similar to repairing a phone. There's many small parts and ribbon cables inside the joycon. Patients, dexterity and good lighting are needed.. at one point, the spring for the joycon lock went flying. I had a fun time crawling around on my kitchen floor for 20 minutes trying to find it. Eventually I did find the spring. Huzzah!! Then, i discovered some extra springs included in the kit. I could have easily replaced it instead. 🙄

I bought this because my right controller wasn’t charging in console or on a charging dock. I had another controller and tested if it was the console or the controller and determined the controller. The unit fits great and simple to install. Only issue I have is that it doesn’t come with the controller designation lenses. The original slide rail looks to be glued in place so I couldn’t remove and replace. The new unit looks like it has the option for them as well. Aside from that it’s amazing. Also it’s worth switching to the metal locking pin, it’s sounds more secure, I even do it to the opposite controller.

It's a pain to rebuild the Joycons (take your time), but this worked great to fix a botched rebuild I had previously done. Much cheaper than replacing them.

Love this kit, it’s all the tools you need..

Got 2 of these and 1 of the 4 ribbon cables tore immediately when I went to put a gentle bend in it as needed for it to fit in the shell. Because of this I'm pretty concerned about the longevity of the rest of the parts but only time will tell. I also ran into an issue with this kit and everything fitting nicely in an after-market shell but I think that is actually on the shell. I will also have to replace the joysticks again eventually for sure because these aren't hall effect. 2 of my joy con don't lock in when I slide them on the console now but I only need the 2 to do that. I'm pretty luke-warm about this kit.

didn't;t test if they work becuase I broke some parts while trying to fix it, but the package arrive in good shape and the tools were in very good quality one day shipping also :)

Paquete muy completo y de buena calidad

This joycon kit was everything we needed and perfect. The young one had a great time fixing his own joycon. I did have to help as some parts he struggled with, but expected, most parents would probably take this on not MM 12. But he now has a functioning joycon again and is super happy. Thank you. Would def purchase again if needed

安くでな直りました！ 交換方法はYouTubeで調べればいくらでも出てきます！ 本体と取り付け部のラッチの部品が、左右が有ることに、組んでから気付きました。涙 トータル的にいい商品だと思います。

Great parts controller works good as new small tools were excellent quality as well