Spec Ops Tools Pry Bar, Crowbar for Demolition & Nail Pulling, High-Carbon Steel, 15" Flat Pry Bar

I've owned this item for three years and today I finally got a chance to fully use it. I removed old boards from around an overhead door frame on a shed, with about 30 feet of boards to be removed. The boards I was removing were all installed about 45 years ago, using 5- and 6-inch ring shank nails, driven into a treated 4x4 of the same age. Those nails were IN THERE and hard to pull out. This bar laid waste to the whole job, held up perfectly, and did what it's supposed to. I was hammering this in between a 2x10 and a 4x4 with a 3 pound hammer, driving in both the curved end and the straight end. Then, not being a small guy, I used all my strength, body weight and leverage that I could, and this bar took it all without batting an eye. It pried the 8- and 12-foot long 2x10s away from the 4x4s and came back for more. After all that, the sharpened ends are still sharp, and there was no hint of bending or breaking at any point in the operation. The finish on the curved end, which took all the pounding, is worse for the wear, but that's to be expected, and it makes the bar not still look brand new after three years of owning it. It should look used. This bar definitely earned its keep today. It's heavy, solid, sharp, and will take the abuse.

I bought this kit to help tear down an old privacy fence, and it turned out to be the perfect choice for the job. Each tool was just the right size for working around stubborn boards and nails. They made pulling old nails quick and easy while protecting my hands from splinters and rough wood. The build quality is solid — everything feels sturdy and well-balanced in the hand. After hours of use, the grips were still comfortable, and none of the tools showed any bending or wear. They functioned exactly as expected and made the project go much faster than I anticipated. For the price, this kit is an excellent value and a great addition to any toolbox. Whether you’re taking apart an old fence, doing light demolition, or tackling DIY repairs, this set is ready to handle the work. Highly recommended!

I bought this to remove several nailed down deck boards that needed to be replaced. The tool is solid and pretty heavy. Easily pried up boards and then the nails left behind. Made the job a lot easier. Well worth the purchase.

This was purchased to replace a 36" "gooseneck" bar privately branded by one of the big box lumber yards. Last year I'd been pleased with the performance of the 36" while replacing exterior cedar trim but a couple weeks ago it actually bent when using it for heavier work. My search for a wrecking or demo bar on Amazon found this and I'll admit to being a little put off by the price, especially considering it's only a 30" bar but this thing probably weighs more than 1.5 x what the big box bar weighs and it's a much more thoughtful design, like whoever came up with its subtle features has a very clear working knowledge of this type of tool. Fit and finish are excellent for a tool thats going to get the crap beat out of it. A little extra fulcrum material is added in all the right places and this is downright heavy so I expect it to take a beating with a smile. Good Job Spec Ops Guys! Update: A year of heavy use later and this bar continues to exceed my expectations. I thought it might suffer some because of its shorter length but honestly I don't even notice because it offers such superior leverage. It helps me get more done quicker, so it's more than paid for itself, and there's nothing like the feel of a quality tool in your hand even if it's used for demolition. If this was ever lost (doubtful) I'd buy another in a heartbeat. I also have the small flatbar for EDC on my toolbelt and for its small size and weight it's an extremely capable and useful tool. Thinking about getting the 21" flat bar based on the quality of the other two tools.

well built

Best tools so far as I ever had perfect size very sharp and ik it probably don't matter but they look Great great value for the money.

Built solid, havey duty and does the job the first time for a Great Pry Bar

Best barbfor your buck

very good and so strong

Das Teil ist sehr gut

Extremely sturdy and robust tools. Used all 3 for heavy demolition work and it made the job so much easier. Each tool complements the others very well. All tools survived many ~8ft drops without any issues. Highly recommend.

excelente. buen acabado y material.

Heavy duty vom feinsten. Nur zu empfehlen für die groben Abrissarbeiten