for 2010 2011 2012 2013 2014 2015 2016 2017 2018 Dodge Ram Headlight Assembly compatible with 10-18 Ram 1500/10-18 Ram 2500 3500 Chrome Housing Amber Reflector Headlamp Replacement

Perfect fit for my 2018 Ram 1500! Super clear lenses, well made, and look just like the stock ones. Bulbs are bright. Had to adjust because my truck is lifted, but that’s easy with a socket on an extension and ratchet. YouTube has some great videos on how to adjust them… it’s really simple. Highly recommend these for the price.

These headlights were a perfect replacement for my 2007 dodge ram 1500. Easy to install, solid quality, and very bright. Definitely worth the money

Fit well. Fairly easy to install. Look great.

Easy install, they fit like oem, and I was able to reuse the old bulbs. Only complaint I have is the left one seems to not fit as close to the body line as the right side. I did have to adjust the lights to point more upwards, but it wasn’t hard to access the adjustment screw

Buy these! I replaced my 2008 Ram 3500 headlights. My old ones were yellow-ed and dull. I ordered these and they fit awesome. Could have fooled me that they were OEM. Came with all the bulbs in the new headlights also. Simply plug and play.

My truck is getting old (252,624 miles) and my eyesight at night is not what it used to be. So, after careful review and consideration, I decided to buy and install these aftermarket headlamp pods by ADCARLIGHTS along with separately purchased Sylvania H13 Ultra Life Capsules. This combination has worked out great cosmetically as well as functionally for my needs. Now the road is much brighter and clearer to me at night and allows me to see those pesky deer just waiting it jump out in front of me. These headlamp pods were not the least expensive, nor were they the most expensive lamp pods available. As an Industrial Engineer in the manufacturing of automotive headlamp industry for 30 years, I have to say for an aftermarket headlamp the design appears to be very close if not, the same as the original. This is why I decided to purchase and install this particular headlamp pod, along with the Sylvania H13 Ultra Life Capsules on my truck. When installing please note that it is extremely important not to handle your existing or new capsules or park/turn bulbs with your bare fingers. The oils from your hand will heat up and stress and eventually crack the glass allowing oxygen to enter the capsule or bulb causing pre-mature failure / reduce performance. I suggest installing the new capsules and bulbs to the existing connectors first taking care to handle by the base only or use nitrile gloves when handling. Then carefully engage the capsule / bulb connector to the molded features of the lamp pod until fully locked into position. Then you can engage the wire harness connectors to the appropriate capsule / bulb connector. To install the new headlamp pod, start by aligning the ball stud into the white ball socket which has been inserted into the sheet metal. Upon inspection, I decided to remove the new ball sockets that came with the new headlamp pods and re-use the existing ball socket already installed. Next press the ball stud into the ball socket firmly until you feel it engage, while aligning the lower threaded mounting stud and the two molds guide pins protruding from the housing of the lamp. Then start the threading of the 10mm nut onto the lower threaded mounting stud, but do not tighten as this time. Proceed to the two inboard mounting holes and insert and align the T30 Torx bolts in each hole and thread until you see the end of the bolt coming out of the fastener. Now press the headlamp inward again to seat all three points uniformly, (equally). Complete the threading of the 10mm nut until snug. DO NOT OVER TIGHTEN or you could break the housing or crack the housing boss. I would then proceed to the front lower T30 torx bolt and tighten until snug against the molded mount bracket and repeat for the upper T30 torx bolt. Again snuggly, DO NOT OVER TIGHTEN. The protective coating that has been applied to these lamps is intended to protect and slow the hazing process caused by the sun's ultraviolet rays. However, I am going to make it a practice to apply a spray on wax & dry spray wax to help repel rain and prevent water spots, plus help provide a clean surface, hoping that it will help preserve and prolong the protective coating. Please note these are only suggestions for handling and installation and I have no direct association with the manufacturer of these products or Amazon, this is simply my opinion. Hope this helps.

The lights look clean and fit like OEM, so in a pinch they’re “okay.” The real issue is the adjustment screw — it’s a torque-bit style, but it just spins and doesn’t actually move the light up or down. Because you can’t adjust the vertical alignment, the beams end up almost crossed and pointed at the ground about four feet in front of you. That makes them basically useless for real driving. I reached out to the seller, but like most overseas sellers on here, I’m not expecting a response. Thankfully, Amazon makes returns easy, so I’ll send these back and order a better pair. Bottom line: you get what you pay for.

Reason for the 3 star instead of a 5 star is the wire harness on the headlight assembly is smaller than the factory harness and the factory harness doesn't fit due to size difference.. I've had these awesome looking light on my 2014 dodge ram 1500 for about 4 months and the passenger side headlight stopped working both high and low beam lights were not working so after pulling the assembly out I did a wire diag and found the small ground wire on the after market harness was faulty or had a short so I figured I would try swapping the new harness with the old.. nope the old was bigger than the new.. so I fixed the issue by cutting and soldered the old harness to the new and havent had an issue since, now the driver side is doing the same thing...

Nice headlights see in the comments they are not well installed them right amd DAM THEY LOOK GOOD

Excelentes materiales, muy recomendable

perfect fit super looking nice and bright no instructions with it but i watched a youtube video that showed how to remove replace. one hidden bolt on bottom tricky between bumper cover and d light fixture little bit of finesse getting old one out but overall easy install ! i installed led bulbs and have super bright crystal clear vision with these headlights great value for price point i definitely recommend this product ! enjoy! time will tell but the quality and workmanship seem top notch

Bn

The headlight units fit as billed, they certainly make a difference. Affordable and an absolute necessary safety feature with the shrinking daylight hours approaching.