Matte Aluminum License Plate Frame

My first set I bought in around 2020. This is my second set, they look amazing and are durable. Living in Cali things fade and it took 6 years so these rock. Installation is easy, they give you multiple screws even the caps stayed on for 6 years.

Nice, subdued tag frames that are holding up well, so far. I bought these because my preferred car wash had started grabbing the edge of my front tag and was folding it pretty well by the time the wash cycle was finished. It was getting progressively worse - to the point it looked like the tag might crack soon it kept happening. After watching, car with tag frames didn't seem to have this issue. I didn't want anything very flashy and didn't want my car to be a rolling billboard for my school, for how much I love dogs or cats - or pizza or the beach or hockey or whatever (I do love this stuff, but figure it doesn't need to be trumpeted to strangers, right? :) ), or to advertise my military service (I have that, too, and am proud of it but don't think I need to broadcast that, either). I just wanted something simple, tasteful, and functional. These have been perfect - couldn't ask for anything better! They're easy to install, have been laughing at the car wash, so far, and are wearing really well overall. Great tag frames! Highly recommend! Update - 11/24/2018: these tag frames look and work great. They’re nice and light, yet solid enough that they do a great job of protecting my front tag in a car wash that’s known for ripping tags off (a trade off since it cleans the best). I like these so much that bought a second set for another car in August. They’re every bit as good as the original set on the first car. Highly recommend! Update 2: Both sets of tag frames still look and work great. The original set is now approaching two years old and the second is over a year old. Both easily stand up in the car wash and have also done well in cases where I've had to park front first into snow and the snow has caught or bumped the front tag. So far, they haven't been affected by road salt or brine, either. (some start to look pitted or tacky after exposure to road salt or brine) Highly recommend!

This is definitely a five star product for price, appearance and quality, but I'm only giving it four stars because of the screw caps. They fit perfectly, are secure, and look great, but there is one problem. Once they are on, they are on for good. You snap them tight inside the washer. If I need to remove the plates for whatever reason in the future, the only option I see is drilling through the screw caps to get at the screws on the plate. This could be solved simply by putting threads on the outside of the washers and screwing the caps on over them. Another option would be to supply black screws and not use the caps at all. Having said that, these are very sturdy, attractive frames. They have a nice, satin finish. The screw caps look great and the wider bottom edge gives them a nice look. A screwdriver is included for convenience. Also, before ordering, check the design of your plates. Do they use two screws or four? Will the frames cover any important information? I'm in California where the information is at the top of the plate, so they work perfectly for me. If your annual stickers go on the bottom, they might be partially covered.

One of the major eyesores that messes up the exterior look of your car is the ugly plastic plate frames that the dealership puts on your car,..the Ohuhu Matte black plate frames is the perfect inexpensive way to improve the aesthetic look look of your car . They really do make a lot of difference (see my attached pics) especially if you have a dark colored vehicle. I really like the fact that they have included screw caps which hide the screws and only two mounting points which give a uniform look on the frame . The powder coated matte finish is very well done and the frames feel solid. Pros - Great inexpensive way to improve the look of your car, especially if its dark colored - Being made of Aluminum means that they can flex a bit with tightening them up , I have cracked couple of plastic frames due to the odd mounting angle on my car - Two mounting points and included screw caps give the frame a nice and continuous look - Good quality powder coated matte finish Cons - At this price none. In the end I really like these frames and if you want to improving the looks of your car without spending too much , I would fully recommend these plates Disclosure : I was provided a sample unit for review purposes , however the views reflected are entirely objective and my own.

Just put these (well, one) on my black Q50S. I'm very happy with them. One of the frames has slight imperfections in the form of a couple tiny raised bubbles maybe 2mm in diameter. It's noticeable when you look closely but basically invisible standing a couple feet back from the car. The other frame was without any defects at all. Since I only use the rear plate (until CHP yells at me, that is) I went with the latter with no defects. The color is a very close match to the obsidian paint. Though the plate frames don't stand out and blend in with the body, they do a great job of smoothing the edges and corners of the license plate for an overall sleeker look. One small nit is the washers are made of a softer plastic. It was a challenge to tighten the screws and keep the washers centered. Hardly a big deal, I just had to use my free hand to recenter the washers as I tightened the screws. Additionally, a couple of the screw caps showed a little extra plastic tab from where they were punched out of the sheet used during production. Again, not a big deal. Overall, I'm very satisfied - especially for the price. Now let's see how they hold up in SoCal UV over the summer...

**UPDATE** A replacement was sent to me and they are perfect ; survived a front-impact crash, even. Highly recommend! These look nice and are very useable, easy to put on, and don't seem to be the type of quality to chip or damage. It gets 3 stars simply because I bought this one (over other, cheaper ones) simply because it came with the screw covers that would make it look really nice. I bought it less than 2 months ago and already one of the screw caps has popped off. They do not come with spares, extras, or any way to buy an additional one, so now my options are to leave it asymmetrical, take both off (thus having spent extra money for nothing), or buy a new set (no thank you). Beware, the screw caps are FLIMSY and lasted only a couple of months for me... the others will probably pop off soon too... If you don't care much for those, then just don't use them - put on the covers without them and rate it 5 stars... for me, since that's not why I bought it, I give it 2 stars. For the covers themselves, I can't say anything about other states, but it fits a standard Texas plate just perfectly.

This review is for the Ohuhu Matte Black Powder coasted driver license frames. These frames are great especially for the price. The frames are a nice matte black and look very premium. You see a lot of plastic frames but I definitely recommend the metal ones. If you do not have frames on your car I thoroughly recommend these. People without frames are more likely to targeted by people trying to steal your registration stickers. People can cut the your plates long the right side of the bolts, it happened to me and I have seen other cars with it. If you have a plastic frame I would seriously doubt the structural integrity in protecting it but a plastic frame is better than no frame at all. Cutting a few slices through your sticker will not protect it if you do not have a frame. I would like to not the the screws that come with these are not the most secure. Anyone with a drill can take these off in 10 seconds and take your plates. Do your self a favor and buy some hex screws to go with these plates. I bought the 20 pc license plate screws for only $7, and they still fit the black caps over it. These are some quality frames for the price, but some decent screws and you are good! Good luck!

Overall it is a good product. It could be better but cannot complain for the cost as it does what it is intended to do. The first set I received had a crushed box which bent both frames. Had to return and reorder. Second set came with no damage. The finished is nice but after about a month they did fade to a charcoal black and grey color. Think of black plastic trim on a older car. Its faded and hazy, no longer the black color it once was. I will say they do include plenty of hardware and plastic caps which is a plus because if you drop one like I did and could not find it to save your life at least you have a spare. I did see some reviewers saying it was near impossible to get the caps off; I will say I did repaint the frames with a satin black spray paint and had no issues removing the caps. Bet way to remove them is get a small flat head screw driver and pop them off from the bottom side. They have a slight over hang from the frame making it easy to pop them off with out destroying them. Overall, 3 stars. 1 for price, 1 for hardware, and 1 for metal and not plastic frames.