YONICO Router Bits Pattern Bit Flush Trim 1/2-Inch X 1-Inch Top Bearing 1/4-Inch Shank 14074q

This particular bit worked great. I have purchased several Yonico bits and all have met my needs and have held up nicely. The price point is attractive and so far they have done everything a more expensive bit does.

To start with, before you even get to the bits, Yonico exceeds most other lower priced bit manufacturers; carbide is BRITTLE, so tossing bits in a paper envelope is bound to cause a nonzero number of problems. Yonico has the sense to pack each bit in a heavy vinyl sleeve complete with hanging hole- honestly if I’d had the sense to buy from them from the start I may well have put up a pegboard instead of a cabinet for my bits and kept them in their sleeves! If you’re starting out or overhauling your shop, definitely consider that. But then, they take the extra step of placing them into a sturdy box, too. It’s a little more work and expense, but it matters- and the tools inside that packaging continue the theme. Just looking at them you can see they’re made and finished to a far higher standard than the throwaway no-name brands. Routers are powerful tools that can be very dangerous if anything is even slightly wrong; these bits are consistently trustworthy so even novice users can confidently and safely explore new techniques.

Very compact bit worked well with my Makita offset router base and it's limited height adjustment capability. (bit shank insertion is the only adjustment). I used it for cutting small rabbets in installed flooring. Very close quarters, saved me a lot of chisel work. I did not check the tightness of the collar set screw as I would normally do - oops. The set screw is about the diameter of a pin head and not much longer so you don't want to lose it. Mine fell out first use. It should be tightened at the factory but you should never assume that no matter what brand it is. If I manage to find a replacement set screw I will set it with loctite red. This bit is so compact the bearing and collar are very thin so don't expect it to be heavy duty. Do the math: 3/8" cut minus 1/4" shank divided by 2. Bearing is 1/16" thick. It appears to be a true sealed bearing with inner/outer races and balls or rollers. I ran it at low rpm / slow feed and had no problems.

These bits are top notch. I have more than 1000 of these bits and have used them a lot. They cut well and last as long as could be expected of any router bit. The key to extending the life of a router bit is having extra bearings , because you never know when they will go bad. Plus having a diamond credit card style sharpener if and when needed. The bits are plenty sharp for quite some use in the beginning but all blades eventually need a sharpening. Price is decent, way better than buying locally.

Second bit I have bought of this brand and like the first, this one has performed well for my needs. Not a super heavy user but for some of my projects, I need an unusual size and paying huge dollars for casual use doesn't make sense. I expect these bits to last for as long as I need them.

Very nice router bit, very sharp

Cheaply priced router bits. Yet not cheaply made. Personally I buy this brand on bits I don't use that much. Most of my day to day ones are Amana brand. Boo Coo bucks but imho the best. A great buy & packaging is impressive.

The size is a useful size that's hard to find but I've got to give it 1 star for it's terrible bearings. I've ordered 3 of these trying to get through a project and the bearings fail within hours of use. Actual routing time per bit is maybe 20 to 30 minutes of use. I'm ordering some different bearings from another brand to hopefully make these useful. The bits have been used in pine with maybe a 1/4 inch bite per pass.

Cumple mis expectativas y es de muy buena calidad.

Vary satisfied with the performance of this router bit. I have used it to cut dados into the surface of a laminated kitchen worktop which it achieved with zero chip out of the laminate. Dado was made in several passes and was true and clean. Price even with postage from the US is very competitive and offers good value for the quality of these bits. Item arrived in very good time over a week before the earliest delivery due date. My only criticism is with this being a US company all bit measurements are in imperial which causes a bit of working round when working in metric. Overall very satisfied would recommend and will make further purchases of Yonico router bits.

Excelente producto

Gambo da 1/4"avete bisogno di un Adattatore per mandrino di fresatura 6.35 lo consiglio un ottimo prodotto,Si è comportato bene Consegna sempre nei tempi previsti da amazon, impeccabile!

Quando l ho acquistata pensavo mi arrivasse una fresa giocattolo, mal lavorata, approssimativa, la classica "cineseria" pagata poco. E invece.. Un prodotto made in USA, solido, tagliente, preciso Eccellente