Ultra-Small RPi GPIO Terminal Block Breakout Board Module, for Raspberry Pi

An excellent product, well made and very useful, and I recommend it particularly as it leaves the camera connection unencumbered, unlike the breakouts which cover the entire board. However, as the screw threads of the standoffs are not something one typically has on hand, they should provide four additional screws and washers so that the Pi can be secured to a mounting board or box through the provided standoffs. Not a big deal, but the product's usability would be enhanced by this very small addition. (Note that even without screwing it down, the breakout board is solidly connected through its pins.)

Holds onto the 40pin headers firmly. Too large for most cases but still very compact and useful.

What a study easy to wire connector. I needed a better way to wire my gpio on my raspberry pi. This is it. Comes with a screw driver that gits the screws to tighten the wires to individual gpio pins that you provide. I made a drivable car. The connector is well made and the wires are held in place solid once you screw them down. Once you get it installed it def is small but it is the correct size dor the gpio on tbe pi. With this i can wire my projects the unplug my pi, then go to another project and wire the next one up unplug pi when done as it plugs in like a hat connector.

This ultra-small GPIO terminal block breakout board works great for Raspberry Pi projects where you want clean, screw-terminal connections instead of loose jumper wires. It fits well on the Pi and makes wiring sensors and modules much easier and more secure. Pros: Compact size, doesn’t take up much space Screw terminals hold wires securely Makes GPIO wiring much cleaner Good for prototyping and test setups Cons: Very small labels — hard to read No documentation or pinout included Not ideal for frequent rewiring Overall, this is a simple, useful accessory for anyone doing GPIO work on a Raspberry Pi. Nothing fancy, but it gets the job done.

The Chinese are getting better ... This is a very well made product in every regard, not the usual Chinese crap that eBay is too often flooded with. Despite the tiny size that is necessary to fit a credit card sized single board computer (SBC) like the Raspberry Pi 4, the terminal block is well made and the miniscule printing of the labels of each of the GPIO pin's function is crisp, sharp and legible. The included accessories are useful, saving customers the hassle to find/purchase a mini screwdriver for the little screws separately. The separators/spacer are brass instead of plastic and everything looks well made, allowing the GPIO connector on the Raspberry's PCB to still be used with straight connectors that you plug in vertically (angled connectors will obviously not be possible because the terminator block is on both sides). The little box with the product arrived three weeks earlier than expected. For anyone who plans on squeezing as many wiring as possible into the little Raspberry without buying a big housing, this little add-on is highly recommended.

GAME CHANGER: If you are a maker and are using Raspberry Pi, this is a must-have. It cleans up your wiring, makes it easier to connect, install, and remove your Raspberry Pi in tight-fitting spaces, and, for the value of this price, why wouldn't you order 10??? Beautiful, awesome little trinket, I've already bought 3.

Compact. Great labels for gpio. Compatible with rpi0, rpi4, rpi5 and more. Not compatible with rpi pico! This is my go-to gpio label and the best out there. It’s very compact. Its small size however means the screwdriver for the pins is also TINY. I have broken several of the tiny included screwdrivers.

Very useful for Raspberry Pi DIY. Dealing with the GPIO pins can be a pain, but this device makes it simple.