MuHize Fuse Taps-4 Types 12 Pack Add-A-Circuit Adapters

Great value

Worked well. Inserted the one fuse tap that I acutally needed... not sure what to do with the rest but this kit was the same price as just the ONE I needed so can't complain. One thing I would mention is that it's a bit confusing which fuse slot to use for the attached device vs. the internal one since there is no label or instructions. I had to use a volt meter to figure out how it was wired internally. Once that was established no problems though other than the fuses fit REALLY tight. Guess that's better than the alternative :)

Had these in the garage for a while, finally used one last week to add a switch to my Jeep. Very easy to install. Instructions are lacking, especially if you want to know without testing which is the hot tap and which fuse block is for the fuse this one is adding. It's the top one, if the metal prongs are at the bottom. The original fuse goes in the bottom slot. But worked well, and easy way to add an additional accessory.

The kit itself is decent, and includes different size taps and fuses. It came with 3 x each size for both taps and fuses, which for me was perfect as I used it to hardwire a dashcam, needed two so leaving one as a spare. All the fuses it came with were 5 amps, which is again perfect for a dashcam. The connections are not great, some are really tight, which is not a huge issue but makes removing fuses in the future a bit more of a hassle. As for the installation, if you have done it before you know what to do, it’s pretty straight forward, but if it’s your first time then you might end up like me, wasting a couple of hours trying to figure out if these even work. I almost returned these thinking they are faulty until I watched a better youtube video and found out that you need to install both fuses (the one it came with on top and the one you are tapping to in the bottom) and there might be a certain direction you need to plug it in (top leg into positive contact). So, it would be great to have a literally one sheet directions included to avoid frustration!

these worked. downside for me was that they are pretty bulky and the clearance between them installed and the plastic door over the fuses inside the car is not enough for the door to totally close when installed. it latches enough to sorta stay latched and isn't really noticeable but it is still annoying. Functionally though they are exactly what I needed to install the aftermarket camera system I used them for.

excellent fuse taps

Dodge routes all vehicle electrical connections to a central fuse box under the hood. When the battery went dead twice, I traced a phantom current drain of almost half an amp to the radio. Unfortunately, the radio circuit was "hot" all the time. I had the option of 1) replacing the radio ($300+); 2) installing an additional relay ($50 to $150); or 3) remember to run the car every 2 days to prevent a dead battery (not gonna happen). I took a meter out to the car, and found a circuit that was already switched and fused in the fuse box. I removed the fuse for the radio, and used this jumper/fuse kit to grab power from the switched circuit to the radio, through a fuse provided with the kit. PROBLEM SOLVED, and to my surprise, the radio has either a rechargeable battery or capacitor storage, because the clock in the radio still kept accurate time, even though power was removed when the car was turned off!

I bought these fuse adapters to install a dash cam on a 2016 honda accord. This kit comes with 4 different fuse types. My car uses the low profile mini fuses which are recessed or sunken into the fuse ports of the car. The way these devices work is, you remove an existing fuse and then you insert this into the fuse port where you removed the fuse. The existing fuse and the new fuse goes into the slots on the adapter. Well since the fuses are recessed and this adapter is bulky it is stopped from being completely inserted into the port by other surrounding fuses and it doesn't make contact and is loose in the port. For my dash cam I needed constant power and switched power. The constant power is for parking mode to work. For constant power I found one empty fuse port with no surrounding fuses and I installed a low profile fuse there, it went all the way in, was snug and made perfect contact. For switched power I had to use a mini fuse instead of the low profile fuse because the mini fuse had longer blades and they are about the same dimensions as a low profile fuse. The longer blades allows the fuse to go into the port and make contact without being stopped by surrounding fuses. The provided fuses are cheap and fall apart with a little pressure. Would not buy again for my car but it may work fine for other people.

ordered these items for my employers mechanic for a early christmas present and they are being installed and the mechanics lack of cursing and smile says it all. good product., specially for fleets.

Perfect for setting up your dash camera

A nice assortment of fuse taps so you can add additional accessories to your vehicle easily. The seller is super fast for delivery

I used the smallest of the supplied fuses in the kit. They were extremely difficult to insert as the holder seemed too tight. Tried pulling one out and the fuse broke in half. I've used other kits and pulled fuses many times. These are not the best