Amazon Basics Classic Puresoft PU Padded Mid-Back Office Chair with Armrest, Height Adjustable, Easy to Assemble, 26"D x 23.75"W x 42"H, Cream

I recently got this office chair for my desk, and so far I’m really happy with it. It’s comfortable enough to sit in for long stretches — supportive without feeling stiff — which makes my work sessions more enjoyable. It rolls smoothly on our wood floors, which has been a nice bonus. No scratching or catching, just easy movement as I reach around my workspace. For the price, it feels like a great value. It looks good, feels solid, and gives me exactly what I need for everyday use without feeling cheap. Overall, a great chair for a home office setup. I’d recommend it if you’re looking for something comfy and reliable without spending a ton.

Best desk chair ever the price was amazing delivered very fast easy to put together very sturdy and well-made very comfortable to sit in for long periods of time it contour to your body perfectly. This is definitely the best desk chair I’ve ever owned and when it wears out, I’ll be buying another one.

Very easy to put together took under 30mins. For someone whose 6ft though the back goes up to about a fist under shoulder height for it. Arm rests a bit short but they're doable. Decent comfort. Very sturdy when screwed in all the way. Don't need two people just do it sideways leaned against something. Overall just wish it'd be a tad bit taller on the back and you can also add extra cushioning to it.

For the price, the comfort is hard to beat. The Puresoft upholstery feels premium and is easy to wipe down. It provides solid lumbar support for an 8-hour workday, and the assembly was straightforward. A reliable staple for any home office.

Comfortable chair for an office or gaming. My 11 year old says its Comfortable. Easy to put together. Good quality chair.

This replaced a second hand desk chair which was losing all of it's adjustability options. And though the seat back holder was metal, it was starting to crack, and had me leaning back more and more, so I had to get a new chair. Which brought me to this chair for my home computer desk... Not as many adjustment options on this one (just the raise/lower and the slight recline lock on/off), but I wasn't expecting that on this budget-minded chair. At least the maximum pitch of the recline option is on par with your average airline seat, which is far better than my older, rickety chair. The entire chair is upholstered in a easy-to-clean leather-like fabric (no mesh anywhere), which I believe will survive scratching cats than meshy fabrics. The back support is comfy-sturdy, but has an accessible inner cavity (more on this later) and the seat is also cushioned well. The legs and the base are all metal, including the five leg coverings. The plastic sections that shroud the pneumatic lift are flimsier plastic sheaths. The armrests are non-adjustable and a bit shoter than my old chair. Minimal softer plastic-like cushioning on the armrests, but I'm fine with that. My only real issue about this chair is the cheap plastic armrest caps which cover the bolt assemblies between the armrests and the seats and seat backs -- they randomly pop off -- but it shouldn't be an issue unless you are anal about the cosmetic look about the chair. Assembly was fairly easy, with all the tools, nuts, bolts and screws were all grouped and labled in a sturdy "blister pack" (think OTC cold capsule packaging at the drug store). *** ABOUT THE BACKREST CAVITY -- NOTE *** This is where Amazon Basics saves packaging space. Your delivery box may look a bit on the smaller side. Don't worry! Much of the chair assembly (legs, tools, caps,etc...) is stored INSIDE the backrest during shipping. All you need to do is to unzip the contents from that cavity and voila! Everything is there. There should be red ribbons and/or strips RED tape to remind you the essentials are zipped up in the cavity. Once everything is out of the inside of the backrest, you theoretically can add more cushioning, back massager or similar -- although I haven't needed to do it yet. 4 stars due to the flimsy plastic caps and lift sheaths. But again, that is just cosmetic stuff and not durability issues.

This chair is to replace an older chair that had simply worn out over a span of about 15 years of use. I was looking for a quick, budget minded replacement and then will spend probably weeks looking at a higher quality chair, with full high back. At this price, I was not expecting a high quality chair, and that is what I got. It is more or less easy to assemble. It can be a bit tricky when assembling the arm rest. I loosely attached the back two bolts, then the seat. I did the same on the other side, and then tightened them in sequence : Outer back and outer seat bolts, then inner back and inner seat screws. The threads on the back and seat frame are pre-machined but with very little tolerance so you need to be careful not strip them out if you start them at even just a slightly off-angle. Assembling the base and height adjustment assembly went much easier. The chair has a metal inner frame, and base is also metal (there is some wood on the inside sides of the back and perhaps inside the seat). There is some plastic in the base assembly, but that is only cosmetic. Armrest frames are plastic as well. I also replaced the wheels with higher grade wheels I already had on hand (these have a slightly wider tread as well as slightly larger diameter). Finally I went back through and retightened all the screws, taking care not to overtighten. Assembly completion from opening the box to final check was about 30 minutes. The faux leather covering is what you would expect in a chair at this price range. The seat padding is very firm (too firm?) but not uncomfortable for me, but will have to see how it feels after a long session at my computer. The biggest disappointment is the nearly hollow back with NO filling or padding (this is where the parts are stored when shipped). Very little to no support! I had a large bag of batting I was going to use for another project in the near future but decided to stuff it into the back (the bottom has a zipper ... remember, this is where the parts were stored). I took care to install the batting evenly, taking care not to overstuff. It made a big difference. The other disappointment was that, although listed as a mid-back chair, it is just barely that. Many other chairs (higher price) typically have at least a 24" inside back length for a mid-size chair back, as measured from the top of the seat ... this one is 22" The seat depth could have been maybe and inch deeper, as many chairs at this price have (this chair at 17.75" is barely enough). I am 5'11" and wight about 190 lbs. If you are taller or heavier, this chair might not work well for you. (My daughter, who is medium build at 5' 7" thought it was comfortable for her). So here is my summary: PRO: Good price. Seems to be sturdy enough with full metal frame and base. Assembly a bit tricky but just need to be patient and have good lighting. CONS: Seat depth a bit too short. Back offers little to no support without some fill (DIY). So overall, this will do until I can spend some time to look at chairs in person, with better overall quality.

Amazing chair! I actually use it in my kitchen. It goes well with my other chairs but I use this one. Easy to put together too

Fácil de armar, se ve bien y es cómoda, los materiales son de mediana calidad.

Easily Assembly. Not too bulky and its comfortable. The only reason I didnt give it 5 starts is because the back of the chair is hollow as thats where they stuff the parts to assemble it. It is not a big deal, its still comfy and its design does help my posture actually.. many chairs I have found I dont use the back as it leans back too much and this one keeps me upright but the lack of additional cushion when it was possible prevents this from being all it could be.

1. No creo que sea para personas muy grandes, por que sólo mide 60cm de ancho con todo y brazos para que lo tomen en cuenta. 2.La postura es muy buena, mi espalda queda totalmente recta y es cómoda a pesar de usarla varias horas seguidas. 3. Los brazos están un poco más abajo de lo normal por lo que si buscas recargar los codos para trabajar al nivel de un escritorio puede que no te funcione tanto (a mi me queda Perfecto por que entra por completo debajo de la mesa y mis codos quedan sobre el escritorio). 4.Pesa 11 kg en la caja pero una vez armada es muy ligera. 5.Fue fácil de armar (la mayoría de las piezas vienen dentro del respaldo) 6.Creo que el terminado es bueno, se ve elegante y sobria. 7. Buena relación calidad/precio.

Es la primera silla que compro de este estilo, se ve muy bonita, pero tengo la impresión que no durará mucho, el respaldo es hueco y tiene como un estilo cintas bien engrapadas que son las que dan el soporte, la parte donde uno se sienta es comoda, pero se siente corta a las piernas, de momento he visto que se salen los tapones de los tornillos de los descansa brazos, en general bien, pero la calidad regular buena, falta ver que tanto dura. Creo que por el precio podría tener mejor soporte.