Reverse Osmosis Water Filter - Alkaline Mineral pH+, NSF/ASNI 58&53&42&372 Standard, 600GPD Tankless RO Reverse Osmosis System, Under Sink, 2:1 Pure to Drain, Reduce FPAS/PFOA, PD600-TAM3

I’ve been using the Frizzlife Reverse Osmosis Water Filter for a bit now and I’m honestly very impressed. The installation was much easier than I expected, and the tankless design saves a lot of space under the sink. The water flow is fast, and the taste difference is noticeable right away — clean, fresh, and no weird aftertaste. I really like the built-in display that shows TDS levels and filter life. It’s convenient not having to guess when filters need replacing. The alkaline remineralization is a nice bonus, and the water tastes great for drinking and cooking. Overall, the system feels well-built and high quality. It does exactly what it promises, and I feel confident about the water my family is drinking. I’d definitely recommend this system to anyone looking for a reliable under-sink RO filter.

I have a whole house iron filter and water softner to correct high iron from my well. My TDS from water test was at 265ppm. From my understanding, a water softner adds some sodium to the water. I bought this item to reduce my TDS in my drinking water, while adding benificial minerals at the same time. After installation, my TDS were reduced to 12ppm. Installation was pretty easy for me. I had a faucet from years past, and had drilled the hole thru the stainless sink with a special bit. The instructions are easy to follow and straight forward. My only issue was getting power to the sink area. Tapped into my dishwasher power line to provide power to fizzlife unit. Total installation time was about 2 hrs. There is a slight hum when using this unit, but barely heard from under the sink cabinet area. The water has a fantastic taste after running thru the Tam 3 ph mineralizer filter! Its a pleasure to drink slightly alkaline water, and much healthier with added minerals. Water output from the faucet is decent, not slow and not really fast but somewhere in the middle range. Its a good looking faucet and well made, not cheap. Overall I am completely satisfied that I purchased this unit and Highly recommend it to anyone looking for great tasting water. You wont be disappointed! Lastly, customer service is outstanding!!!! Had a small issue resolved in a matter of a day on a Sunday to boot. They really back their product and support the customer 100%

I bought this Frizzlife filter to replace another brand tankless RO filter that malfunctioned after 18 months. Here’s my take when compared to the 3 other brand tankless RO filters I have: Pros: - Unit is solid and well built. Installation was easy. No issues. No leaks. - Water filtration is impressive: The TDS of my unfiltered city water supply is 330ppm with a ph of 7.2. This machine reads 6ppm after filtration but the alkaline filter increases it to 28ppm with a ph of 8.7. - The taste is quite good and I think a little better than the other RO filters I've owned. Taste is smooth and well-rounded with no sharpness. Cons: - It really doesn’t work at its best dispensing a single glass at a time. I need to dispense into a carafe and run about 30 seconds first to purge the water sitting in the alkaline TAM3 final stage. If I just filled a glass with glass without running it first, I would end up with a TDS of over 75 and a ph of 9.2 - There is NO phone or even chat support. To get help with a question I needed to email Frizzlife and wait for their mail reply. I had 2 quick questions, which could have been handed in a 2-minute phone call but it took me 4 days and several back-and-forth emails to get them answered - this was really disappointing. - This one makes slightly more noise. I put some vibration pads under the unit which helped. - When recovering from a power interruption, you need to run the filter for a few minutes straight to get the TDS meter working again. Overall would purchase again but still a little disappointing there is no phone support if I have a quick question.

Installation was simple. The application for this reverse osmosis system is for an espresso machine which previously had to be sent to the manufacturer for scale removal. We were advised the mineralization cartridge values are as follows: K: 0.3~1.5 mg/L Ca: 0.5~8 mg/L Na: 0.1~8 mg/L Mg: 0.1~1 mg/L We are hopeful that the Frizzlife system reverse osmosis, water treatment with this remineralization will prevent further scale buildup, while, at the same time, provide minerals for great tasting coffee extraction. We will update. Will now purchase another unit PD800 and integrate another remin cartridge , very satisfied with PD 600 and will use for drinking water. PD 1000 will be used for espresso machines. We have purchased two units 2nd unit PD 1000 TAM4: Both the tapwater and the well water in southwest Michigan is contaminated with 100-225ppm chlorides. Which are guaranteed to cause damage to very expensive espresso machines. Only reverse osmosis will remove chlorides. Frizzlife PD 1000 eliminates almost 100% of these and other contaminants. The TAM4 re-mineralization filter provides adequate minerals for good espresso machine operation as well as good mineral balance for coffee flavor extraction. We highly recommend this product for cafes and home use. Some say the TDS is high after letting the system set for 8-10 hours. Please know this is expected, as the RO water that is restin in the remineralization filter has collected more of the healthy minerals. This is actually a good result! If one wishes a certain level f minerals, they could fill a fairly large pitcher. The TDS results will then be diluted. A water hardness test should be performed before using this water in your very expensive espresso machines! Also note that it is highly recommended to use a water softener upstream of this reverse osmosis system when the water will be supplying espresso machines. The ideal water hardness for espresso machines is between 50-80ppm Total Hardness for best taste and to avoid machine damage.

Love the filter! The water taste is good. Also it was easy to install. I’d definitely recommend it to my friends. The water flow is great!

First, this system looks sleek, modern, high tech, and it feels solid and well made. There is attention to detail as well, like the screws are covered on the back, so it has a very clean look all over, and filter access is from the front, so the system doesn't need to be disturbed after it's in place. Next, installation was very straightforward, as the instructions were clear and all parts were included, even some spare clips, connectors, and O-Rings in case any were lost or damaged during the install. Note that the connectors can be damaged, due to user error, if they are not properly released before pulling the tube out, which is explained in the user manual. I'll also mention that while plenty of tubing is provided, you'll definitely want to plan where the system will be installed and make sure the tubes are cut to the appropriate length to ensure smooth water flow and in case the unit needs to be moved for any reason. Definitely measure twice and cut once! Finally, the water! The flow from the faucet is great (hopefully the picture shows that). The taste, which there is none, is also great. I definitely feel like I'm drinking very clean water with no chemical or other possibly 'weird' tastes from the tap. It's even better than my water filter pitcher in the fridge, which is expected, but refreshing! I will add that if you drink a ton of RO water, and don't get a lot of electrolytes from other sources, it might be a good idea to add some to your drinking water. Overall, this is a fantastic system, I am extremely satisfied with my purchase, and would definitely recommend to friends and family!

Easy install, great tasting water, using my hand held tds meter, the pre filtered tds is 135. After r/o unit says 2 tds and after remineralization at the tap was 55-75 tds. If I let the water run for a minute the tds at the tap was 28. For great tasting water there should be 50-150 tds, so it’s on the money! The only thing I will complain about is in the advertising. The info in the description says unit puts out 0.48gpm. Yet, the sticker on the R/O unit says 0.41gpm. That’s no big deal but still false advertising. In reality it is only producing .28gpm. I do have along run. Unit is in my crawl space and it’s about 25 feet to the faucet in the kitchen. Still happy with system.

My Frizzlife purifier has been in service for four days, and overall, I am very pleased. It is relevant to note, that before buying this machine, I did a lot of research and watched reviews for several months. A list of pros/cons follows. Pros: • Water quality seems good at an indicated 28 TDS. • This was the only RO machine that had such a good waste ratio AND remineralized AND PH balanced the water. • The filters are supposed to last a long time. • The taste is great. The water now has a tiny bit of a spring flavor that I believe comes from the remineralization in stage three. o The wife and I did a blind taste test, and both of us found the Frizzlife filtered water to taste much much better than tap water and very similar to Aquafina. o Because of the taste, I have increased my water consumption. o Coffee tastes better too. • Everything is well-packaged/protected, and the machine looks sharp. And seems well-made. • Doesn’t take up a ton of room under the sink. Cons: • Cost-there are a lot of similar machines on Amazon for a lot less. • The faucet that comes with the machine looks nice, but is a little flimsy. The base is firm where attached to the counter, but the actual faucet is wiggly in its base (where is turns right or left). I hope it won’t be an issue in the future. • Made in China. • The speed of the fill is adequate but just barely. I fill a 50 oz. bottle in about 33 seconds. If you need to fill a lot of large containers/pots quickly, this may not be for you. • The noise is noticeable. Any time you turn on the faucet, you are going to hear a hum. About the same as the noise that would come from a floor fan if you shoved it under the sink. I feel a slight vibration too. All in all, I am extremely pleased with the purchase and the pros far outweigh the cons for me. UPDATE: The water taste and clarity are still great.....TDS level is now a steady 14. The faucet that was included is still flimsy and won’t last as long as one would hope. The noise and vibration every time I turn on the faucet it the biggest down-side. It literally causes the floor to vibrate. I am going to start looking for something to put under the unit to dissipate some of that rattle. I would buy it again for the taste and quality of the water that it turns out.

Perfekt vatten. Vatten för dryck och matlagning till 2 personer. Gått i 2 år nu och fortfarande inga indikationer på att filter behöver bytas.

Ho acquistato la versione 1000 GPD con alcalinizzatore esterno per sostituire il mio vecchio impianto di altra marca. Immediatamente ho notato la qualità dei materiali molto superiore alla mia vecchia macchina e dopo la installazione fatta da me ho apprezzato la maggiore portata d'acqua, la silenziosità, il sapore. Ho voluto apportare una deviazione all'ingresso dell'alcalinizzatore con un rubinettino per prelevare acqua osmotizzata pura per il ferro da stiro, per l'idropulsore dentale, per diluire detersivi concentrati ed altri usi simili. Ho lasciato il mio vecchio rubinetto ma devo dire che quello Frizzlife è più bello ed appena avrò una occasione valida provvederò alla sostituzione. Consiglio decisamente Frizzlife.

Scrivo questa recensione dopo un anno di utilizzo allegando immagini della mia installazione e delle analisi dell'acqua che ho volutamente fatto fare dopo un anno proprio per verificare la validità del prodotto. Innanzi tutto sono stato favorevolmente colpito dalla macchina che ha un discreto peso ed e' fatta con plastiche solide e una qualita' generale abbastanza alta per un oggetto preso in sconto a 360€ per il black friday. Piccola premessa.Nel mio impianto e' gia' presente un addolcitore con a monte un filtro a cotone 10micron ,questo va considerato quando parlero' delle analisi chimiche / biologiche dell' acqua. Ho scelto il Frizzlife PD600 dopo attenta valutazioni di caratteristiche tecniche e recensioni nonche' (e sopratutto ) delle dimensioni dell' oggetto. E qui veniamo all' installazione. e ai problemi di posizionamento egregiamente risolti. Non scrivero' dell' installazione del sistema che e' di fatto semplice e non richiede grosse capacita' idrauliche / meccaniche ed e' assolutamente alla portata di non professionisti. Vorrei invece parlare del suo posizionamento nel mobile della cucina che come potete vedere dalle foto è costituito da due cassettoni nella parte del lavello come si trovano spesso nelle cucine moderne. il problema nasce dal fatto che i cassettoni occupano buona parte del volume del modulo e quindi un posizionamento all'interno di uno dei cassettoni (sacrificando eventualmente i bidoncini dell' immondizia) e' impossibile. Altra considerazione: Il Frizzlife PD600 NON PUO' essere installato orizzontalmente e quindi un installazione sotto lo zoccolo della cucina non e' possibile. Per ovviare al problema ho installato il PD600 nello spazio vuoto interno al lato dx del lavello lasciato libero dai due cassettoni chiusi (vedere foto e Video) fissando con delle staffe , una mensola al mobile della cucina. Ecco il perche' dell'attenta valutazione delle dimensioni. Altri prodotti semplicemente non ci stavano e avrebbero richiesto un installazione in un altra parte del mobile poco congeniale alle mie esigenze. La mia non e' una soluzione definitiva per tutti i modelli di cucina con cassettoni ma chi dovesse avere questo problema puo' verificare le proprie misure e valutarne la fattibilità . Il filtro mineralizzatore e' stato invece semplicemente appoggiato alla parete perche' con il suo sostegno da muro sporgeva troppo e non si chiudeva il cassettone. Per completare l'impianto ho voluto installare per maggiore sicurezza mia personale una lampada UV poco prima del rubinetto. Ho optato per un rubinetto a 3 vie piuttosto che il rubinettino in dotazione per un semplice fattore estetico della cucina (e perche' non volevo forare il piano infragranite ) Veniamo ora all'utilizzo e alle considerazioni sui risultati delle analisi. Il PD600 TAM3 funziona egregiamente, l'acqua scorre immediatamente appena si apre il rubinetto e con un buon flusso compatibile con quanto dichiarato dalla casa (600 galloni al giorno = 1,5 l al minuto ) quindi poco meno di un minuto per riempire la tipica bottiglia di acqua da 1 litro e mezzo. L'acqua al gusto e' molto buona nessun retrogusto strano e per quello che riguarda le analisi fatte eseguire da un laboratorio specializzato si evince che il fitro osmosi lavora bene tenendo i valori chimici di potabilità ampiamente al di sotto di quanto stabilito per legge. E' chiaro che essendo acqua di rete , la potabilità e' garantita dal fornitore , ciò non toglie che al rubinetto ,lungo tutto il percorso dall'acquedotto fino a casa non possano intervenire fattori che inquinano e peggiorano l'acqua. I valori fuori norma di durezza sono invece dovuti alla mia personale configurazione dell'addolcitore ,quindi e' una cosa nota e voluta. Per quello che riguarda il pH incide sicuramente il filtro TAM che dovrebbe essere sostituito dopo un anno di utilizzo , e un ph di partenza (acqua di rete ) generalmente sul limite basso dei 6,5 Le analisi biologiche non presentano criticità anzi tutti i valori si attestano sullo zero. Quanto incida la lampada UV non e' quantificabile perche' andrebbe fatta un analisi bypassando la lampada e ponendo i dati a confronto. Mi sento di dire che per un installazione "standard" su acqua di rete pubblica la lampada e' un surplus visto che la menbrana ad osmosi filtra veramente il decimo di micron e quindi anche i batteri e virus. L'unica situazione critica puo' essere il ristagno di acqua nel filtro TAM che e' a valle della membrana e prima del rubinetto ma che puo' essere evitata facendo scorrere l'acqua alcuni secondi prima di utilizzarla. Conclusioni: Il sistema osmosi Frizzlife PD600 TAM3 soddisfa pienamente le mie aspettative fornendo risultati ottimi spendendo un decimo di quello che propongono i vari "venditori tradizionali" ed evitando costosi contratti di manutenzione. Partendo da un TDS di 440 ppm (quantità' di sostanze disciolte nell'acqua) dell'acqua della mia zona, il sistema Frizzlife PD600 fornisce acqua da bere buonissima con un TDS costantemente a 20 ppm filtrando piu' del 95% delle sostanze disciolte in acqua I filtri di ricambio, così come la Membrana ad osmosi hanno dei costi abbordabili e una semplicita' di manutenzione che non richiede personale specializzato.Dopo un anno di utilizzo le spie di sostituzione filtri sono ancora spente , ricordo che l'azienda dichiara la durata di 1 anno per il primo stadio e per il filtro TAM3 mentre e' di 2 anni la durata del filtro osmosi. Per esperienza personale , la presenza di un filtro a cotone e di un addolcitore a monte dell' impianto aiuta e aumenta la durata dei filtri ad osmosi. Speriamo nella reperibilità dei ricambi nel lungo termine. In questo anno ho avuto modo di confrontarmi con il servizio clienti e supporto tecnico di Frizzlife e devo dire che la comunicazione e' stata ottima (solo in lingua inglese però). Ad oggi mi sento di consigliare a pieni voti questo prodotto

Works as described. Excellent installation instructions which are easy to follow and has a help line to assist you. It has improved my well water in taste where we use it all the time

All'inizio era leggera e sapore veramente buono, ma dopo 2 mesi di utilizzo l'acqua ha un sapore pessimo e pesante quasi come il rubinetto dell'acquedotto. Sinceramente mi sta deludendo.