DIY SBUS to 16CH PWM Converter SBUS to PWM/PPM DECODER Two Way PPM Support Conversion of Futaba, Orange, Frsky and Other SBUS Signals

Description

SBUS to pwm/ppm decoder, 16 channels full output, support computer settings, any port output arbitrary channel data, multi-port output 1 or more signals, all channel output order customization, support conversion futaba, orange, frsky and other sbus signal. For example, the FRSKY X8R receiver has only 8 PWM interfaces, but this receiver can output 16 channels using the SBUS port. However, if 16 PWM channel outputs are used, it can work in combination with the frequency dual receiver, but use sbus to pwm. The decoder requires only one receiver plus converter to achieve all 16 pwm channel outputs. Review: Does not work as-advertised - As of this writing (29JAN2021) I have the latest firmware on my Horus X10S and RX8R Pro. When using this item, only channels 1-8 are usable. 9-16 are powered and hold the servo at center but will not work otherwise. In addition, the PWM signal that DOES output on channels 1-8 is limited in frequency. This results in a notable difference in servo horn rotation. This is directly compared to output of the same servo on the same channel output from the receiver itself. All of these results were replicated with an X8R receiver, also with the latest firmware. I've used another converter in the past that works flawlessly in applications where I needed the additional channel access. This product should be entirely avoided.