Precision Router Table System, Kreg# PRS1045

High Quality, Well Made and I’m very satisfied with this Router Table. This is my first Router Table and I’m now using this Tool most of the time for my projects. The table is silky smooth and find the fence to be solid and accurate. Easy to adjust and and much easier to use over a hand held router.

From top to bottom, beginning to end, this is a great table. The assembly was a breeze; parts all fit perfectly, instructions are clear and concise. For once, a kilt that was a pleasure to build. Construction is stable and solid. Mounting router was a breeze. I highly recommend.

Two things. First there are no holes for the router which made the install frustration. Second wheels are a must and should be better stated they do not come with the product. Other than that I love the product. I did add a magnetic shelf on the side for spare jigs and so forth as well as wheels.

Very high quality table. I also ordered the matching router lift. Works great and very repeatable and easy to set up

Upon arrival it’s box was broken so bad. There were 3 other boxes within the big box. Once I open these boxes I realized bunch of hardware are missing. It took me almost two days to figure how to assemble this router able. Because of hardware were missing I could built my own table, but I bought this on to save some time. I was wrong. The fence is very clumsy and loss. All and all I am very disappointed.

This is excellent piece of kit. It does all the things I need it to do. I did put locking casters on it for ease of use. But the feet that comes with it are good. Only issue the rubber falls out of feet. So some epoxy will fix that. Also get the switch extra. I did not, but will do in the future. Just easier and safer to control the router. I run a Bosch Unit. Make sure you get a anti kickback plate. Safer and easier. The surfacing setup with the fence works great and easy. On delivery it was missing the center red bezels and lock ring. A quick email to seller and they sent me the complete insert. KREG Molded Router Table Insert Plate Blank, for All Routers. Which was the rectangle surround and a set of inserts. Great job. Definitely Purchase this.

Considering this is a $500 table, I will be a bit critical. I am leaving this review after sending a message to the seller, so will edit it after I hear back from them. The order did not come with the fence assembly per the option I selected and paid for, meaning now I must wait for that to get resolved. I am not sure who places the product in an outer box for shipping, but I have noticed Amazon (presumably) is grabbing any box they lay hands on lately to use as an outer shipping box, even though it is way too large (a friend had the same issue where a huge box was used and many things inside were damaged, and more than a few of my orders tend to come in ridiculous large outer boxes). The outer box was at least four times too large and no inner packing material was used to stabilize the inner product box. This resulted in the inner box tearing itself apart in shipping, with parts scattered all over. Three bolts necessary to assemble were missing (the bolt bag had torn apart and bolts were laying in the outer box, which itself was damaged with holes in it), so I had to run to the hardware store to find some substitute bolts (that will not work for the long run) just so I could set it upright. The leveling legs were damaged, their threads having been bashed in by parts. This makes it difficult/unacceptable to try to thread on the nuts. I had to place some casters I had on temporarily so I could set it up and finish assembly. Amazingly the main parts were not scratched or dented in all this. The main table bolts Kreg is using are not machined very well, with burrs in the threads on around 1/3 of them. You are supposed to hand tighten then use a square to ensure the legs and runners are square, but with the burrs in the threads you have to use a tool to run the nuts down. It worked in the end, but again for $500 one would expect a little better quality control on the bolts. If it is about saving money - Kreg: you can make them a little shorter to save on cost as they are a bit long, making it hard to use a socket to tighten the offset bolt/nut due to the one below it. Make them a bit shorter to save your costs and do better on the thread machining. The final end parts to attach the feet to are slotted to allow for height adjustment, which is nice. But it would be helpful if some kind of height guide was scribed into the part. The table is a set height, and without some kind of marking guide on the leg parts you have no idea now high the table will result in unless you measure the unit without those end feet attached, then measure where you set the bolts to get an idea. Again, for this price, it would be helpful if the total height of the stand was marked with some lines to give you an idea of height when you set those final parts. Irritating as to change the bolts after it is all assembled is a pain. As for positives, it is a good looking table with easy to read and follow instructions. Not much to it for $500, as the bundle I purchased for $497 did not include casters, did not include a switch, and had a static plate. The image I posted includes extras I had bought (power switch and precision lift). Leveling the plate is pretty simple as the directions to set the leveling screws to 3/8" below the top gets it about 99.5% there. I used a 3/8" setup block to set that height, which made it easier. The lower stars are due to the unacceptable packaging, the damage resulting in missing bolts and leveling feet not able to be used, and the incomplete order (missing the fence). Once I get those bolts and feet replaced and the fence arrives I will likely up the rating a bit.

I will update this as I use it more. So far it is flat and the plate fits in it fine. The steel legs are nice and the Kreg casters are much better than "generic" ones. The fence stays relatively square and is solid. I am not a fan of the 1 1/16 inch MDF core but I feel like this is what you get with anything that is not cast iron. Instructions were good and as usual Kreg has the best customer service I have ever experienced. I do notice that when locking the fence down it might want to move as it locked down but if you pay close attention its not an issue. We will see how this plays out with more use. Im considering making an acrylic box to help with under the fence dust extraction. I currently have the kreg lift with a bora 3.25 HP motor installed. Kreg lift had a slight cup but once the router was installed the crewed into the leveling clips the bow came out. I will continue to check it and see how it plays out long term. This is a huge upgrade from my bosch small bench top table.

No llega completo, falta el tablero qué es parte principal de la mesa

Paired this table with a Jessem router lift. The original table top was missing everything but Normand tools quickly rectified the problem by ordering another table top with all the proper hardware. Kudos to Normand tools for customer service. I ended up ordering Jessem leveĺling pads because the Kreg ones didnt align properly with router lift. Table is solidly built and works well. I built some slide out drawers into the cabinet and the router worked flawlessly and accurately to create the gooves for the bottom of the drawer. All in all I am happy with this purchase.

Warum der Frästisch hier bedeutend günstiger als bei Sauter selbst ist, ist mir nicht klar. Über 50€! Mit dieser Preisgestaltung möchte sich der Sautershop wohl selbst abschaffen !? Das Produkt ist klasse!

Great service, quick, good price. We have used it to finish the picture frames we made. Would definitely recommend this to others!

Das Material ist gut. Die Lackierung hatte ein paar Läufer und unterschiedlich dick. Ein Gewinde im Fuß müsste ich neu schneiden. Es fehlten zwei Unterlegscheiben. Die Bohrungen an der Platte waren nicht genau. Nach all den Mängeln ist der aufgebaute Tisch gut und der Winkel zum Anschlag passte fast auf Anhieb. Für das Geld hatte ich aber viel mehr Qualität erwartet.