SINSB7W ProGrip Ultra Stainless Steel Speaker Wall Mount Bracket White, Pair of 2 - Thread Size: 1/4-20 - Holds up to 10 Lbs

Excellent speaker wall mount brackets. I have used these for a year or two now, no complaints thus far. They are stable, sturdy, and look good. If you are looking for a product like this, these will not disappoint you.

I rarely write reviews, but I just have to for the Jumbl SINSB7B ProGrip Ultra. From the moment I unpacked them, I could tell these mounts were built to last. The stainless steel feels solid, and installing my speakers was surprisingly easy — no confusing instructions or flimsy parts. Once mounted, being able to adjust them just right made a huge difference. My sound now fills the room exactly how I want, and it just feels right. Sure, the hardware could be a bit stronger at extreme angles, but in everyday use, it’s rock‑solid. What really gets me is how much they improve my space — my home theater finally feels complete. These mounts are simple, dependable, and do exactly what they promise. Honestly, I’m just thrilled I found them.

Pros: -Parts are metal and sturdy unlike most competitors who rely heavily on plastic. -Easy to mount -Does not come with wall anchors, however the wall-mounting holes are well enough designed that you have a lot of flexibility on what wall anchors you need for your wall (either drywall or using #10 wood screws directly into a stud). -You can easily tighten the ball enough to prevent horizontal movement or vertical sagging, unlike most other wall mounts (I'm using 8.5 lb speakers). Note that you can twist the ball either accidentally or purposefully if you want a speaker at a 45 degree angle for some reason. Cons: -The clamping screw to tighten the ball into place on the wall is some indeterminate metric size that isn't labeled anywhere. If you tighten it with a screwdriver, you're golden. Don't use the included allen wrench, it's an exercise in frustration. If you use a socket wrench to tighten it you WILL strip the threads on the bolt. Fortunately 1/4" - 20 1.5" machine screws fit nicely so it's easy enough to swap in a substitute. Overall I'd absolutely buy these again. They're easy to mount, they're trivial to level, they're not going to break, they don't sag, and the only con is that they're so sturdy the tighten-the-ball screw will strip before the mount breaks. Better a few cent screw than RMAing an entire mount if you overdo it.

Needed some mount for my new outdoor speakers and was looking for something flexible and cheap. These work great and hold my kicker speakers no problem. There 6 lbs so not very heavy and these mounts could hd something twice as heavy. Very flexible and can tilt and turn the speakers a fair amount before the speaker hits the wall. If using with smaller speaker you could do 180 degrees no problem. Super easy to install and adjust with an Allen wrench. Only negative is they don't come with hardware to mount to the wall. I understand this as there so many different pieces of hardware they would have to provide to install into all the different types of walls. I used some structural wood screws to mount them through my aluminum siding into the studs. Worked great

Used both to hold a Polk Monitor XT35 Center Channel speaker weighing 14lbs. It needed to be above the tv and angled down. Screwed a white melamine MDF board to the wall's studs and then drill holes in it to use 1/4-20 Hex Drive Wood inserts to attach these mounts to the board. I used the same inserts on the speaker since it only had keyhole holders. You have to be very accurate taking measurements and leveling. Bottom line, I was able to angle the speaker to my desire and the brackets handle the weight perfectly. A reviewer said that one of these wasn't holding his bookshelf speaker that weighs 10 lbs, most likely because it has too much leverage, the speaker is too deep and these were not designed for a speaker that big, regardless of its weight. My speaker is heavy but it is slim and not too deep, plus I am using both brackets; obviously I can only move the speaker in one axis, but that is all I needed. Also, the hex wrench provided is not convenient, it'll do the job, but it'll frustrate you. I used a hex bit socket and a ratchet wrench, so I could quickly tighten each screw while holding the speaker in the desired position.

These would have been a five out of five but much like other reviews, while these wall mount brackets are great, after two shipments and having all four come in scratched, I finally just kept the best looking two and returned the other two. It's quite apparent that these could use a little bit more packing material to keep the studs from scratching the nice powder coat on the bracket

Nice sturdy mount for speakers. Easy to install and adjust after mounting. Well made.

Works great for speakers that have a threaded insert (1/4”-20 thread) in the rear of the speaker cabinet. If your speaker doesn’t have a hole in the back that is threaded for a bolt, then these mounts won’t work. Also, the mounts do NOT come with screws or hardware that attach it to your wall. I’m ok with that. There are multiple materials (drywall, studs, plaster, brick, cement, etc.) you can mount these to, and each requires a different fastener. I attached mine through drywall into wall studs, so I attached mine with #10 x 2” wood screws. I drilled pilot holes first with a 1/8” drill bit. If you mount to drywall, then I recommend drywall anchors with #8 x 1-1/4” screws. At any rate, get the right fasteners for your wall. Each mount has 2 holes. The seller should say this in the listing. It’s confusing because the listing says “ The mount comes with all the mounting hardware you need” which is just inviting confusion and resentment when you open the box and find no mounting hardware. Should also say “your speaker must have a threaded mounting hole”.

Los utilicé para las bocinas surround Polk Audio OWM3 Sin problema las sostiene en el ángulo que se desee Su color blanco es perfecto para una instalación discreta y elegante

The product is to replace my existing Bose Jewel Cube mounts. The thread size does not match but one can open up the Jewel speaker and remove the screw fitting. With an additional nut, this Pro-Grip can be fitted well. The design of this mount is sturdy and brilliant. Intending to purchase more.

Très solide rtd facile à bn utilser. Très bien.

Didn't fit my keyhole speaker fixings. Returned and received a refund.

当方の住まいに合うのは、これしかなく、仕様、機能、デザインは満足れべるだが、新品と言いながら、2つとも傷があった。返品の時間がなく諦めたが、ここは不満足。箱も破れており、梱包方法に課題があると思われる。