AlloyGator Blue Alloy Wheel Protectors – Up to 24" x 4 Wheels | Rim Protectors to Avoid Kerb Scratches & Scuffs | Fits All Cars | Adhesive Free Car Exterior Accessory | 15 Colours

If you’re running decent alloys and don’t fancy shelling out for a refurb every time a kerb jumps out at you, this kit’s a smart investment. Designed to sit between the tyre bead and rim, these protectors offer full-edge coverage without glue, tape, or gimmicks. The black finish keeps it stealthy—no flashy trim, just clean protection. 🧰 Installation Let’s be honest—this isn’t a five-minute job. You’ll need to deflate the tyre slightly, clean the rim edge, and use the supplied clips and mallet to seat the protector properly. It’s a snug fit, and once it’s in, it stays put. I did mine in about 40 minutes with a mate and a bit of patience. No adhesive means no mess, and they’re reusable if you swap tyres later. Tip: If you’re not confident, a tyre shop can fit them for a small fee. Worth it if you want it done right. 🛡️ Build Quality Made from a reinforced nylon composite—flexible enough to absorb impact, rigid enough to hold shape. They’ve taken scrapes from kerbs, gravel, and even a rogue pallet corner without cracking or popping out. The black finish is matte, not glossy, so it blends in with most wheel styles and doesn’t show dirt easily. Durability: Survived motorway runs, heavy rain, and rough terrain No fade or warp after months of use Easy to clean with standard wheel cleaner 🚗 Compatibility Fits wheels from 12" to 24" Works best with tyre profiles 45 and above Not ideal for ultra-low profiles—can interfere with bead seating Available in 15 colours, but black keeps it subtle and clean 👍 Pros ✅ Full rim protection—edge-to-edge coverage ✅ No adhesive—secure mechanical fit ✅ Reusable—can be refitted after tyre changes ✅ Tough nylon blend—resists kerb rash and impact ✅ Subtle styling—black blends with most alloys ✅ MOT-safe—doesn’t interfere with tyre performance 👎 Cons ❌ Fitting takes effort—deflate tyres and use a mallet ❌ Not suited for ultra-low profiles—check clearance ❌ Adds slight bulk—may not suit show builds ❌ Can trap dirt—needs occasional clean behind the lip

Had them fitted at my local tyre depot £36 Thought that was good value because trying to fit them at home I don’t think would be a good idea They seem sturdy and well made and in a different league to ones that just stick on They certainly cost a good deal more but in my opinion well worth it

Love the look of these but unable to retain tyre pressure on run flat tyres. Was a faff to fit but we got there. Description is misleading and professional fitting and bead seal is recommended for run flats. Would not refund me as I had fitted them

They state u can fit these yourself, not convinced. I bought a set and had them put on my alloys, my local loyal tyre fitters had problems But got them on ok, did a good job till I mangled the rear passenger side one on a high kerb. If I had not had this on there would have been a very expensive repair to the alloy as they are split rims. Bought this one same as the others and had a lot of trouble finding a garage who was prepared to fit it. When I did I watched it being fitted. Took 40 minuets and the guy obviously knew what he was doing. There’s quite a bit to it and it can pop out when you fill the tyre with air. Saying all that would I but this product again. Defo yes saved me a fortune in repairs.

Professional fitted but after a few hundred miles the front worked loose, tried a few attempts with no joy, same on the back after 500 miles. I run 255/45r18 on a T5. I wouldn’t recommend. Clicked return but was given less than 24 hours to get them removed and sent back, which wasn’t possible being a bank holiday! Update 18/04, company engaged following feedback and offered replacement or refund. Good customer service and appreciate the customer engagement.

Delivery has not arrived on time again, although i'm a prime member. The product is of a very good quality

So far so good! I had my local tyre place fit them on 3 months ago. They are very strong and sturdy! I Love them on my car.

Do not go up and down kerbs with this product as it pinches tyre on way down and cuts sidewall of tyre also they come out of rim, things to be wary of. They do look good on wheels, would consider buying again tho’ trial and error has been expensive. New tyres on front at a cost of £165 each.

Pour insérer les AlloyGator sans problème, mettre un peu de WD40 sur le pourtour de la jante et le pneu et ensuite insérer les AlloyGator avec une massette en plastic caoutchouteuse ! Super résultat ! Bonne qualité.

I have this product on two of my automobiles and just replaced tires on one, It is difficult, if not impossible to reuse them again, so I purchased another set and will install them myself.

Parfait pour les jantes Tesla model 3 2020. Pour l'installation : Lever la voiture avec un cric costeau. n'utilisez surtout pas celui fourni avec la voiture. Si vous utilisez celui de la voiture mettez des grosses cales en bois pour soutenir la voiture ou des chandelles. Dégonfler entièrement la roue, mettre un lubrifiant entre la roue et la jante. Moi, j'ai mis du liquide vaisselle pure. Attention a la valve 🤣 et a la carrosserie. Au début, tapez doucement pour mettre la protection ensuite dès que vous avez fini de faire le tour de la roue, remettez du lubrifiant et tapez plus fort pour bien insérer la protection et coupez le surplus. Sinon enlever la roue pour le faire au sol. Mais j'ai préféré le faire avec la roue en place pour que je puisse tourner la roue au fur et a mesure que je mets la protection. Surtout ne pas couper avant d'avoir fait le tour complet de la roue. Lors d'un changement de pneus, on peut le réutiliser il faut juste prévenir l'installateur de la présence de la protection. La procédure pour le garagiste est dans la notice d'installation. Je la garde dans la boîte à gants.

Un producto extremadamente bueno, recomiendo este producto al 100% si quieres proteger tus rines y darle un aspecto excelente ⭐️⭐️⭐️⭐️⭐️

I recommend this British Made wheel protector for your vehicle. The product is made well, it's tough, durable and can take a beating when installing them on your wheels. Follow the directions and watch a install video on YouTube to get familiar on how to properly install. Use the correct tools- plastic hammer, use plenty of soapy water for lubrication when hammering it on to your wheel. Ensure the tire is completely deflated if you choose to do it while on jacks with wheel/tire installed on the vehicle.