YESWELDER Flux Core Gasless MIG Wire, E71T-GS Mild Carbon Steel .030-Inch Diameter 2-Pound, Strong ABS Plastic Spool Welding Wire

New spool for a new flux core welder. It feeds smoothly, without binding or unspooling, and burns well. I'm still tweaking the welder, but at this point it seems to have a good melting point and welds with decent spatter control and no tip burn or fouling. As we know, the versatility of flux core makes it preferable to stick or gas-shielded welding for some positions, and outdoors where wind can affect the gas. Right out of the box it seems a bit brittle, but I've found 0.030 flux core to often be that way. By the time it's loaded and run through the cable it's fine - just handle it gently until then. This wire comes vacuum-packaged in a foil wrapper to protect it from rust and contamination. Better packaging than some competitors, which can arrive with light surface rust or oxidation that can affect the quality of welds. And the price is right - about half the price you'll see at the big home improvement stores. Based on the many positive reviews, this might just be the preferred wire for beginners and for experienced welder alike. One thing I wonder about is the thickness of the spool itself. On my new welder it seemed to have a little extra thickness, enough that the spool, tension spring, spacer, and washers left too little room for the tightener wingnut to engage the spindle's threads. Might be an isolated problem, but if so you'll need to find a workaround.

I used this in my Harbor Freight 120V mig welder. I typically weld my mower deck, trailer side rails, and mild steel1/4". This works better than HFT brand mig welding wire. Package is thick durable and air tight. Treat your self, buy this affordable quality wire. Don't let me catch you welding in shorts and sneakers. Don't weld indoors. Protect your health. With all the money you are saving by doing it DIY, you can now get the proper PPE right here on Amazon. Happy Welding.

some of the best wire ive used with my harbor freight mig welder, low splatter. worked really good at higher amperages, the higher the amperage went the less it would splatter,

welds as good as any wire I have had in the past. Great price and packaging !! I will buy the 10lb spool next time to save even more money !!

This is excellent wire for my YESWELDER 135. In my opinion it really doesn’t leave a ton of splatter and has very little smoke. I used the wire to patch the frame on my C10 truck and it sent great. This is the only flux core wire i will buy now. You also can’t beat the price.

I am SHOCKED by how good this wire is. I use a Vulcan Migmax 215 from Harbor Freight and I've had it for about 5 years now. After having really poor performance from cheap Amazon welding wire I've just ran Harbor Freight's own brand. This wire was about 20 dollars cheaper than the HF price, but has been the BEST wire I've ever used. Less spatter, better beads, cheaper price. I'll definitely be getting more of this.

Just opened the package and tried it out it burns a little hotter than the last cheap wire I used but the welds are strong and for the price it’s hard to beat

Lays a nice bead. see pictures, now i have not welded in 30 years, or ever flux cored before and first day with a new machine, i had to dial in took about 6 beads, but i produced the pictured beads after less than 10 minutes and about 6 tries. Very low smoking and spatter, nice puddle, used 18-19 volts at 85a w a 120vac multiprocess Azuno 200 . This is 3/16" steel. .035 i bought this wire after watching a YouTube channel i like and glad i did, good results for a great price. i just ordered some other Yes welding spools of different sizes and dome gas solid core and aluminum to try also,, see if the quality and results carry over, but i recommend this wire for a good GO flux core.

وصلت وقمت بتجربتها مباشرة، ممتازة جداًً وسريعة في التلحيم، وقمت بتجربة في السابق لشركة Lincoln و Blue Demon ولم اجد فرق بينهم في العمل . هذه افضل بكثير من حيث نفس العمل والسعر والكمية . انصح بها

muy buen precio y buena calidad

Muy buen producto. Excelente adhesión al metal _acero al carbono_ Alto rendimiento, bajo en proyecciones. De fácil uso y eficaz. Bajo en vapores al momento de soldar. Lo recomiendo. Tiempo llegó en tiempo y forma. Gracias.

Good wire for me being DIYer

Excelente material para el trabajo que realizo, si complace mis expectativas de lo que esperaba del microalambre