44 Pcs Cutting Wheel Set Compatible with Plastic for Rotary Tool

I bought this 44‑piece kit to tackle a variety of little woodworking jobs around the workshop, and it’s turned out to be exactly what I needed. The set includes a handy assortment of 6 mm‑10 mm cutting wheels for a rotary tool plus six high‑speed steel (HSS) circular saw blades in common diameters.Versatility: The cutting wheels slice cleanly through thin plywood, hardwood trim, and most plastics (acrylic, PVC, polycarbonate) without chipping. The HSS blades stay sharp for the usual 1‑2 mm cuts on a small bench‑top saw, making finish work and detail trims a breeze.Quality: All wheels are made from thin‑wall carbides that stay true to shape at high RPMs, and the HSS blades have a reinforced tooth geometry that resists dulling. I’ve run them for hours on a Dremel‑style rotary tool and a mini‑circular saw with no wobble or vibration.Convenient Packaging: Each size is clearly labeled and stored in a sturdy, reusable case, so you can grab the exact wheel or blade you need without rummaging through a junk drawer.Value: At this price you get more than enough variety for hobby‑level cabinets, model‑making, DIY repairs, and hobby‑craft projects—far cheaper than buying each piece separately.The only minor quibble is that the smallest 6 mm wheel can be a touch fragile if you force it into very hard metal, but for the intended wood‑and‑plastic work it’s perfect. Overall, the 44‑piece cutting‑wheel and HSS blade set is a reliable, cost‑effective addition to any small‑shop toolbox. Highly recommended for anyone who needs precise, fast cuts on wood, plastic, or light metal without investing in a full‑size industrial set.

Perfect for my needs.PROS:- as a novice home improvement guy, this was just what I needed to cut some heads off nails to make a tool hanger.- Easy to install/use the discs- instructions were pretty clear as to which discs to use for which job- cut as hoped/expected- fit my old hand-me-down Craftsman rotary tool!CONS:- not sure how durable and long lasting these will be but is a good price so I can appreciate limited use

Quick and Fast delivery at great price

Needed Dremel cutting blades to cut through desk mat. These cutters worked like magic. they cut right through the thick plastic.

First off, this is an excellent value! Better than a lot of the generic blades I have purchased for my rotary tool in the past, for sure. That being said, they ARE generic so don't expect top name brand quality.The resin blades cut well, but they don't seem to be reinforced with fiberglass and therefore they wear down a bit quicker than the product they most closely resemble. Still, they are sturdy- I have not had one break on me yet. Mine came in a little ziplock bag which is handy for storage.The metal blades were a new experience for me. They did a good job on wood but I don't think I would use them on aluminum or anything like that. Pay attention to the direction of rotation- on my Dremel, the printed side faces the tool. Inspect your mandrel before use also, mine had some little burrs on it that threw the blade out of balance at first and made me think my tool was messed up. They came in a sleeve with each of them in a separate sealed pocket which you pretty much have to ruin to open it. No biggie, at least they are protected from each other.I have not used the diamond blades but they appear to be on par with competitive products. Someday I will have a need for them... but it is not this day. Mine were individually sealed in a sleeve like the metal blades. I'm guessing that they could damage each other if left to jostle about in a little bag together.Overall, I'm very pleased with this purchase and will buy it again if it is still available when I need more blades. People always say you get what you pay for, but in this case, you get more.

Diamond blades don't cut for crap. The packaging is annoying - each disc is individually sealed. The other blades work and I guess it's still worth the price but I needed it for the diamond blades and they just get red hot and leave anything you try to cut with bits of steel all over it

great

I only bought this for the resin cutting discs (the black ones). I used it to cut through rusted exhaust fasteners where an angle grinder would be too big/unwieldy.I used this kit with Harbor Freight's "1.3 Amp Variable Speed Rotary Tool Kit".To get an idea of what I had to cut through, I cut the following:1. Cut straight through steel M10 exhaust studs to lop them off completely. I had to do two of these.2. Cut a few sides off of steel M10 nuts so I could remove the nuts from the studs. This is for when the nut is so deformed and dissolved due to rust, that neither a regular nor extractor socket could be used. Just cut off a side or two, the nut's clamping power will be relieved then the remnants of the nut can be popped off the threads sideways/perpendicular to bolt's length, with a hammer and chisel. I had to do this with three nuts and these discs.3. Cut straight through flat 1/2" wide stainless steel exhaust clamps holding heat shields on, the nuts and bolts holding the heat shields on were too far gone to get any type of socket on, had to do about six of these.I used a single resin disc to cut through all of those. For the price I was expecting rotten quality: discs exploding on me, wearing down really fast, flying off mandrels, etc. Instead I only needed to use one disc for all of it, the mandrel didn't fail or loosen, by the time I was finished the disc was barely worn and still usable. The performance for the price was great and a nice surprise. I intend to continue using it until that disc fails which is probably not going to be any time soon. Having the ability to cut through metal with such small discs is very handy. Cutting straight through an M10 exhaust stud took about one minute, without applying any pressure either just let the speed do the work, make sure you wear safety squints, gloves and block the sparks if necessary, may want to wear a mask with a particulate filter too, otherwise you can taste the dust lol.Everything in the kit comes in a handy vinyl pouch with see through plastic pockets to organize the contents. I put the resin discs in a separate zip bag with a silica gel packet to keep it free of moisture and avoid water or atmospheric humidity from degrading the resin over time, though they're so small that even if they did come apart mid-cut I doubt they'd do any damage, at least unlike a 4-5 inch angle grinder wheel coming apart at 11000rpm LOL...

لابأس

Bought these cutting wheels to do little jobs here and there. So far, I've tried all these wheels on Dremmel to cut wood, metal and plastic, they worked fine. Might try on glass project at a later time.

تحل بعض المشاكل للمحترفين