T24D Aeroponic Cloner System with Built-in Fan and Humidity Dome

It works perfectly for me. I get 100% success rate with roots starting within 1 week. Unit is sturdy and doesnt leak at all even with humidity dome on. I use fox farm nutrients at around 300 ppm.

*8/17 Absolutely love this machine. I pulled one collar and cutting out to check on day seven and it was showing signs of rooting. I unplugged it for a minute to check underneath on day eight, (today), and all of my cuttings were showing signs of root development. I put approximately 8 liters of water in the reservoir and using Clonex cloning solution I started out at 6 ml per liter, at day 5 I bumped it up to 8 ml per liter. Still waiting for them to develop some more before I take them out. From what I'm seeing so far I'd say that this machine is well worth the money if you want to be sure and get roots on all of your cuttings. Seems to be living up to it's 100% ratio reputation so far. *Edit - Four years later and this thing is still going strong! I'm amazed by all the negative reviews that have sprouted up here, maybe quality control has dropped of since I bought mine...? I've started using just straight water in the reservoir for the first 5-6 days then adding just a few drops of General Organics CalMag and get great results, right around 100%! Absolutely love the design as well, all rounded corners inside, so there's no place for nasties to hide when cleaning! Best design in a aerocloner on the market! *(Little tip) It's best to try to keep the reservoir temperature below 80F, what I do is keep a couple ice packs, (or just small soda bottles with water), in the freezer so that I can toss one in the tank when the temp starts rising and I have one ready to switch it out with as needed. Works great!

I ordered one a few weeks back and the only issue was the grommet leaked on the drain plug and I replaced it myself. That was the only reason for no 5 stars originally. I just got my second one in today and, they upgraded the grommet to a larger one. It looks like they must constantly be updating this product without even calling it a new model or anything. Kudos to them!!!! Great product. Also note the fan blows out! It seems useless but it keeps the roots from rotting. Also, change the h2o daily! The lid is not necessary but it well made of thick plastic not the flimsy stuff like on the typical domes.

I have tried building my own aeroponic cloners before. It simply cannot be accomplished in a rubbermaid bin, no matter what they leak and they hold so much water. I use the Clonex nutrient for clone machines and it is expensive so I like that this machine is designed to hold only 2 gallons. Not only does this machine have many more sites (I got the T24) The one I made held 15 gallons of water so this machine will pay for itself in nutrients alone which was a big selling point to me. The lid fits inside the base so the water doesn't leak. The fan is great and this is not only the only cloner I saw with a humidity dome but WOW what a dome! It could be taller but it's tall enough. It is made of thick sturdy plastic, I wouldn't be surprised if you could stand on it, I'm not going to try but wow good quality product that works. I have roots dangling down a week after ot arived. Very happy customer here!

With healthy mothers and optimal environment. 99% success rate. Don't forget regular maintenance.

Had great success with the unit as far as clones go. Besides that, I’m not impressed. The only true advantage to spending much more on this cloner when compared to others is it’s size and shape. This unit has rounded edges, rounded corners which makes it very easy to clean in my opinion. The machine is a bit taller than others but not as wide or long, which makes it the better choice for small spaces. I installed the fan but did not plug it in. Had success without it. Now the bad, Quality control is lacking enormously. As others have mentioned, I was missing the collars.(sent an email to seller) I rinsed off all the dust from the unit, noticed the unit was used. (Sent another email) I also noticed the cutout notch for the pump power cord is offset so that the notch on the top of the unit is not aligned with the notch on the bottom of the unit. This will not allow the top to sit flush. Then had to repack return. Received replacement, got my collars with this one but yet again the unit is used. When you put this item under a high pressure sodium light it makes every smudge, spec and scratch very visible. There was a clear water line. Another used item. Also once again, the cutout notches for the power cord did not align top and bottom causing the top of the unit to see too the left. This was allowing light in. I had to make the cutout a lil bit larger to correct this. This seller made all this right and I’m happy with them. The manufacturer needs to step up their game big time, especially for the price.

Oh... I have waited at least a month from my purchase of this device to ensure its review was a fair one and now that I am writing it, I am so excited to report my findings. Yes, I love science, this was a great experiment. Highlights: 1. Does successfully propogate root growth with a 85-90% success rate. 2. Dome provides excellent humidity and with no vents for the user to monkey with, it removes guesswork. 3. Growth occurred with my one 40w, (150 watt) CFL in a standard silver-coned work light you can pick up at any hardware store for $8 or less. 4. It cloned various plants including; roses, tomato, and also started from seed starters. 5. I found cloning success rates much higher with the use of a cloning gel. I use Rootech. This is also likely impacting the bottom line of your success rate, so consider using something. 6. I also use a root compound to stimulate growth, Great White. My plants love it and I love my plants, so.... This device is well worth the money, even if you're considering building your own. The molded frame is as solid as heat-set plastic can be. But what I love about it is the inset that allows you to move 1.5" plugs anywhere you want, without worry of them falling through into the bucket. From a safety perspective, this device should have a protected inline switch or default GFI plug considering it's a wet device and people aren't likely to plug this in their bathroom or kitchen. It is also why I am giving it 4 stars. I do recognize that nobody is going to lift the lid off while in operation and manhandle the pump (No pun intended). Also that submersible pumps only require me to plug in to a GFI, but again, for the money, include it.

The design of this one is not anywheres close to the 96 and 144 in which I own both of them . The lip around the two halves are not as tall as the other two and water leaks around it. Also the rows are not marked in which is no big deal but does take extra time to mark out your different strains on paper. Just disappointed with the money you pay it could of been as good as the others.

# 1

It works fine. I have 3 big ones and this is for smaller cuts. It's rooting clones right now.

Great product but lots of broken parts from shipping I assume ! Contacted amazon, they sent another one right away... but when it arrived more broken parts soooo I kept the first one and use parts from both to make one good unit !

It arrived fast

Didn't work for me. Followed all instructions and all cuttings rotted. Water temp, PH were exactly correct as per aeroponics' forums. What they don't tell you is that you need to buy an interval timer; for setting time on/off (ie, 2 min on, 5 min off) and an aquarium pump with air stones to bubble the the water for extra oxygen. Very disappointed. Side by side comparison with cuttings in rock wool and humidity dome - rooted at 70% success. Same water, light, etc