ColorMaxx 12 Oz. Gloss Spray Paint, Khaki - 1 Each

This is a great DIY'ers choice for an all around spray paint. Great coverage. No runs (evens out nicely). Dries fast (no long waits between coats). Can sprays at any angle. Good assortment of colors. Use on virtually any surface. I used it on various outdoor plumbing parts (spigots etc.). Self priming with limited prep. Just clean, remove any loose material and shoot. Great price for Krylon quality. My new go-to paint!!

I bought this spray paint and primer combo in both fuchsia and blue to decorate wooden letters for a party I hosted, and I couldn’t be happier with the results! The colors turned out so vibrant and glossy—exactly as promised on the can. The finish looked professional, not streaky or dull, and it made my DIY letters look like something I bought pre-finished from a store. The paint went on evenly, covered the wood beautifully, and dried so much faster than I expected. Even with multiple coats for that extra shine, the surface stayed smooth and bubble-free. I used it indoors with plenty of ventilation. It performed well in that setting. What stood out most was how durable the finish felt once dry. It didn’t chip or lose its gloss, even after handling the letters during setup and cleanup. Guests continuously complimented on how the lettering was so polished. TIPS FOR BUYERS:: Be sure to shake the can for a full minute before each use and do light sweeping motions from about 10-12 inches away. It gives it a flawless drip-free coating every time and really brings out that glossy finish. If you want bright, professional-looking results without complicated steps, this spray paint and primer is a total winner. I’m already planning to use it for my next round of DIY décor projects.

I've been knee-deep in a backyard makeover—painting old metal planters, sealing some wooden birdhouses, and sprucing up plastic garden stakes—and nothing seals the deal like a reliable clear coat. That's where the Krylon K05562007 COLORmaxx Acrylic Clear Finish (Satin Crystal Clear, 11 oz) comes in. Grabbed it for about $7 at the hardware store (often $8-10 online), and it's become my go-to for that final protective touch. If you're tackling DIY projects that need to withstand the elements without losing their shine, this satin spray delivers pro-level results on a budget. Five stars—it's tough, versatile, and hassle-free. What I Loved Most Flawless, Non-Yellowing Protection: This stuff goes on smooth as silk, creating a durable, satin finish that locks in your paint job and guards against UV rays, moisture, and scratches. I coated my freshly painted planters, and after a month of sun and rain, they look brand new—no fading or discoloration. It's non-yellowing, so your colors stay vibrant, whether indoors on craft projects or outdoors on furniture. Easy Application and Quick Dry: The "spray any way" valve lets you hit tricky angles without drips or runs, and the big-button tip makes it a breeze to control. Dries to the touch in under 20 minutes and fully handleable in an hour—perfect for when you're juggling multiple pieces. One can covered about 18 sq ft for me, with even coverage that doesn't leave brush marks (because, duh, it's spray!). Indoor/Outdoor All-Star: Works like a charm on wood, metal, plastic, glass, and more—I've used it on everything from kitchen cabinets to patio decor. Low odor means no headaches during indoor jobs, and it's rust-resistant for metal pieces. Plus, the crystal-clear satin sheen adds a subtle elegance without being glossy-overkill. Any Downsides? In high humidity (above 60%), it can take a smidge longer to cure perfectly, so I learned to check the weather for outdoor sprays. And like any aerosol, shake it well—otherwise, you might get uneven spots. But honestly, these are minor; it's way more forgiving than other clear coats I've tried. Bottom Line The Krylon COLORmaxx Clear Finish isn't just a topper—it's the unsung hero that makes your projects last longer and look sharper. For crafters, homeowners, or anyone fighting the elements, it's an essential at this price point. I've already stocked up for my next round of holiday crafts. If you want protection that doesn't compromise the beauty, spray this on—you won't be disappointed! (Pro tip: Apply in thin layers (2-3 coats) for the smoothest satin vibe—patience pays off with that glass-like depth.)

The color of this paint is so beautifully lovely and tropical - just as shown. The can sprays well, without dripping and provides even coverage. The finish is glossy and resilient to scratching. This paint can make an amateur look like they paint all the time. *It took 2 cans to cover an approximate 3 x 4 bulletin board without painting the back. Order more than you think you need.

Very easy to use I had no runs. Redid some old furniture and I love it so far. Nice nice finish nice color. In the quality is great.

Great product color is amazing

Great for book binding. If you want a really nice finish and feel for covers on home made books, you'll definitely want to be looking for some clear coating sprays like this. It sound's counterintuitive to spray liquid on paper, but it works wonderfully. The hardest part is keeping dust away while spraying multiple coats outside. You'll want to use some other clear coat as well but I always start by coating my covers with a couple coats of the UV resistant krylon stuff for both UV protection and just gets the ball rolling for the next few coats. But you can follow that up with other stuff. Just stay away from fixatives and varnishes unless that's somehow what you want. But it can be confusing when browsing all the options so, yknow. Krylon 1311 and its glossy counterpart are good but are quite fine mist and might require more coats to build up the coating you want. That's why I like krylon colormaxx versions to use in the middle coat to build it up since colormaxx has a lot more volume but less fine mist, and then finishing it with the finer mist stuff for quality. Also worth noting you can mix and match finishes if you want to get particular, like layering a gloss under a thin layer of matte to soften it type beat. On a clear sunny day they should dry almost instantly, at least enough to put another coat on. Maybe a bit longer for the thicker ones. For paperbacks I always print and then spray onto 180gsm matte photo paper. You don't need glossy paper to get a glossy finish, it will probably just be harder to deal with and sticky/tacky attracting dirt and such and may be more expensive. I find myself needing 4-6 total coats depending on the desired finish. Sounds like a lot but it's a small surface area and like I said they dry quickly so you can do them fast. I just hold the cover up to the light of the sun to look for imperfections in the sheen and if it's a little splotchy, just do another coat. One last thing, since each individual coat is thinner than most pieces of dust, you can most often pick out the dust after waiting for the previous coat to dry as long as you're vigilant. Presuming it's just the odd spec of dirt. and not a sandstorm anyway. That's about it, hopefully this information is useful to others trying to figure this out.

Good paint. Color bit darker than I had hoped but it’s ok…..