Rust-Oleum 342668 Stops Rust Truck Bed Coating, 1 Quart, Black

The box had been opened and taped shut on one end. All can were dented up but the hike clips were still on and the lids were secure. First can was fine, havn't opened the others yet. Used a drill mixer to make sure this was blended well. Paint is very thick compared to regular paint and goes on easily (be sure to prep the surface properly) Covered perfectly with 2 coats but did one more with a textured roller just to be sure. I used a brush for most of my project due to having a lot of corners and small spaces. Paint self levels a bit. DO NOT GO BACK OVER WET PAINT... IT WILL BUNCH UP. LET IT DRY AT LEAST AN HOUR. Sand any bumps, drips, and "high traffic"areas between coats. 70 degrees and 50% humidity, first coat dried solid in about 3 hours.... touchable in about an hour. 2nd coat wasn't totally dry for 4 hours but was also touchable in a little over an hour. Texture and color is consistent.

Used this on my truck when I replaced the tailgate and wanted to match the spray in liner on the bed. It worked very well and is quite durable. Nice texture and color, but its quite shiny which doesn't perfectly match the OEM bed now. But I am totally happy with the result and would buy it again. Prep the surface as directed and you'll be happy too.

The cans had a little bit of leakage but that was more than likely caused by the shipper, I mixed it and it's fine, I feel like it was a good price for a good product, I use this to undercoat my old cars.

Pros: Somewhat self-leveling after rolling out, applies well, easy cleanup on skin. Cons: Doubt the long-term durability, probably needs two coats for best protection. This isn't like Herculiner, in that it has rubber granules within for traction and a slight sacrificial wear layer. This is more a rubberized coat that seems to derive traction from the inherent grippy texture. So I'm just guessing, but from the feel of the product, it's not going to be as durable as Herculiner. You get it on your skin, and you can roll or peel the rubbery coating off, easily. That said, the amount a quart covers seems to track with the estimation of 40 s/f. I covered a small trailer's interior (5.5'L X 4.5'W X 10" sides/tailgate) with it. After rolling it out, it will reconstitute a wet surface that tends to hide streaks. Using a open-cell foam roller for bedliner application produces more a "grained" surface like old cameras. And that's fine; it's overall a nice look that will hide any minor surface flaws. It works well with a brush to get in the corners, also.

I used this truck bed coating on book shelves that I intend to use outdoor to store electrical components inside. I was expecting this to stick to the slippery plastic on the exterior walls of the wooden bookshelf and it worked out perfectly. The coating protects the wood from the elements and helps to somewhat waterproof the wood, which is exactly what I wanted. I can see this coating working perfectly on metals such as a truck bed. I applied it using the roller method and results look very good. Easy to use and apply. Any mistakes are forgiving because before it truly hardens its like a peelable rubber material. A great overall product.

i replaced the bed on my 97-dodge ram and coated the bed and exterior sides and underneath (while the box was off and upside down) with this stuff. scuff if up with 100 grit sandpaper on a random orbit sander. (hand sanding is not enough) wipe it clean with a rag soaked in brake parts cleaner and get painting. works great with a mini roller. (rolling will give you a fantastic finish). i cut a normal roller in half. make sure to use a high-quality roller, so the fuzzy doesn't come off in the rolled paint.do not go back over areas too much, as the paint will go crazy. give it 2 coats an hour apart. or as soon as its dry to the touch. even in 50 degrees, it dries fast. dries like concrete/ sandpaper. love it.

Very small can but it definitely did its job I would apply it thick if I ever do it again but one did the trick

You can’t even see it, but it’s on there I love that I found a clear liner for my new grey trailer. I rolled a quart under all the tool boxes, and on the ramps/steps high traffic areas. 1 qt was plenty for 2 coats Brushing did not cover well, but rolling was very easy. These trailers all come w/ a terrible powder coat & I hope to delay the inevitable chips/rust on parts exposed to road debris

After two layers looks really good, long lasting

La atención fue rápida, amable y muy profesional en todo momento. Respondieron de inmediato a mis dudas y brindaron un servicio de primera. La compra fue una muy buena experiencia y se nota el compromiso que tienen con la satisfacción de sus clientes. Sin duda volvería a comprar con ellos y los recomiendo ampliamente.

لا أنصح فيه مادة تجارية سيئ جدا

軽トラの荷台に使いました

Mi producto me pareció muy bien