DataComm Electronics Media Wall Plate with 15 A/125 V Duplex Receptacle

Easy to install and a great way to hide the wires behind the TV! Seemed to be a quality product and did everything it is supposed to do.

Good quality wall plate that looks neat and professional once installed. The material feels durable and it fits perfectly without gaps. Installation was quick and simple. Great product for organizing cables and keeping everything tidy.”

I needed this--an outlet and a passthrough, in white. This looked like it would work, and it didn't require mounting against a stud (which was an issue--and would always be difficult, since the outlet is angled). I measured (twice) and cut the opening. I set the plate into the wall. I flipped the braces into place (for one, I had to loosen the screw a bit--took 10 seconds), then tightened them down. Perfect! The plate and the box are plastic, but sturdy enough to hold up to some pressure and banging around. The outlet feeds from the back, which is convenient for pig tailing (since you will have more room in the box for the other wires, instead of fighting for real estate to the side of the outlet). All in all, I am very pleased.

A bit larger than expected. Good quality and worked as needed, but not perfectly flush to wall.

We decided to install a 55" LG TV on a main wall in our office and after much consideration, decided we wouldn't surface mount any wires or tracks in order to maintain a clean and professional look. Our challenge was that this fixture is ideally suited for either sheet rock walls or new construction - In our case the wall is made of concrete block - most of wish are filled with concrete. We also wanted to have a 2" electrical conduit pipe come into the back of the fixture. After all was said and done, we are very pleased with this fixture as we were able to cut the wall, install the conduit into the back of the fixture and close everything neatly. This fixture is very sturdy and well made - the self securing arms on the back side of the fixture held the fixture tightly in place while the concrete work was done to close up the whole thing. We chose to bore a 2" hole from the rear through the front inlet cowl of the fixture just to make access to the wires more direct - the cowl is a nice aesthetic touch but isn't necessary for us as the TV covers the fixture.entirely. I've purchased a number of similar Datacomm fixtures in the past and there have been no disappointments - They are all consistent in Excellent Quality, Styling and Function. I'd recommend that especially for concrete installs like ours, make all your electrical connections first and test them PRIOR to closing everything up with concrete. The outlet we got tested perfectly (see the circuit tester in the picture). Secondly, again with concrete, make sure you seal everything so as to prevent seepage of wet concrete into the fixture and especially it's outlet. Best to consult a licensed electrician for this. We used a chop saw to cut the conduit at a 45 degree angle and then glued the resulting pieces - once they set we wrapped it with duct tape to hold it firm and seal the joint. Some pics attached... Not quite done yet - more coming as we finish the project

I put three of these in for a new tv and all the wires and boxes associated with home theater setups. They are simple and are a TRUE "wire-management system". These look great in the wall and installed easily (minus the wiring of the outlets of course). I love the flip up locks to hold onto the drywall as opposed to the screws. As long as you can use the pattern even SEMI-efficiently to get a hole cut to size they will hold excellently. Even if your hole is off a bit, the plate can cover up small mistakes and still hold well. A fairly small do-it-yourself project (took me about two days, 4-5 hours each only because I was installing new tv on wall and debating setup locations....running the electrical wire was the most time consuming) that really makes the setup look great. My wife loved it.

Does a great job, exactly what I wanted. I had never wired outlets before but with some research I was able to add one of these behind my TV and another on in my Pantry. This comes with the outlet and box to house the wires in. You cut the hole (template included and then place in in hole, it has clips that can be tightened to hold it to the dry wall. TIP: I would install in a inch or two of the stud. The Outlet that it comes with only has the pushing wire receptacles for the White and Hot. There are 4 hole for each. Then the Ground is a green screw on the side. I was easily able to add from existing outlet then add a second one off the new one. Will but again when I need another one.

For the price, it's a "roomy" box that you can fold cables into, with a hole big enough to shove "extra" wiring back into the wall. The price is a big deal, because you can get less "space" and utility for twice as much money. Meanwhile, I have installed a lot of these things and they're fairly forgiving of "approximate" hole cuts and easy, once you get everything in order, to level, clean, and live with. Still, the quality is less than I'd prefer and there are too many "moving parts." Those tiny screws to hold the electric box on the back... Ugh. Seriously, do everything you can to fit and test this box before you get up on a ladder. You'll have a chance to deal with any "snags" in the process, you're less likely to drop parts or tools, and, you'll have a better idea what you need to do to avoid a meltdown once you get up in the air. Do yourself a favor and buy a better electrical outlet - this one lacks options and has that hated "child proof" door on the plug - not something you should need anyway for small children. And, yes, the big hole for the cables is good, but get some foam or something to fill in the hole... Sound, drafts, bugs - all love a big hole. On your pre-assembly, take note of the best orientation of the box considering your studs that could be in the way of the box "seating" in the wall, how (all) the wires run to the box and how'll they'll "tuck back" from the TV, and so forth. The quality could be better, but for the price you can do very well with a little thought and applied know-how.

Fait le travail ! Parfait pour écran plat …

Worked great! Highly recommend

Good quality, keeps cables clean.

We all know that Amazon lists more than it's share of junk, however this is not on that list. Very happy with the fit and finish and worked perfectly in my wall mount bracket, although I feel it's perhaps just a stroke of luck. I've attached pictures that show how little spare room I had to fit the box within the frame of the wall mount base. In fact, I had to run the right edge of the plate through my table saw as it was overlapping onto the bracket. You'll want to check the opening space on your bracket before you place the order. Good quality product.

I’m not entirely sure if these are UL/CSA approved. Unlike typical boxes, there’s nothing to secure the incoming NMD and the tabs have no rigidity to them. I tapped and put in a metal clamp from a metal box which did the trick, but you shouldn’t have to. Buyer beware. It does serve as an excellent in wall box to hide all of your data though.