LG Electronics WH16NS40 16X Blu-ray/DVD/CD Multi compatible Internal SATA Rewriter Drive, BDXL, M-DISC Support, Black

This is a great drive for the money. Having said that. In 2017 they started shipping them with a firmware update (v1.03) that killed its ability to read 4k bluray movies. If you are slick and computer savvy you can roll back the driver to version 1.02 but it's not as easy as going to the Driver download page on LGs site and downloading the older firmware. LG locked the firmware in so you can only update, NO roll back. All hope is not lost! I have personally completed the roll back process. It was NOT easy and there were many speed bumps along the way but I did complete the process successfully and have been able to read several 4k Blu Ray movies without issue. If you google something called "dosflash patched". It should bring up a site with "myce dot com" in the address. You can read the instruction for the roll back. You will need to sign up if you want to download the files needed. This procedure is only for advanced computer geeks only. You can brick your drive easily. If you don't know what your doing, find someone who does. Don't say I didn't warn you. I will give you one bit of advice since the instructions for doing this do not make this part expressly clear. You MUST use a 32 bit (x86) version of windows to perform the roll back. It just will not work on 64 bit (x64) versions of windows. Don't try, don't wast your time. I spent two days trying to make it work. It won't. I used 7, so I can only validate that it will work on win7 32 bit. You can always partition your HDD and install x86 win7 on there and boot into it. Again, only for advanced computer users. I hope this helps any of you out there that think a firmware patch claiming to increase comparability, but in fact cripples a perfectly good 4k drive is wrong and want to show LG that this underhanded and sleezy trick won't be tolerated!

Added this to an older desktop tower in addition to an existing DVD drive to give it a new lease of life as a media server. Simple installation, fits perfectly and have yet to find a disc it won't play (scratched up coasters an exception). For some reason the firmware that comes installed on this unit removes the ability to play HD Bluray but curious, persistent and courageous owners will find ways around this. Totally unrelated, you can flash the firmware with the correct software for this drive. Fair warning - doing so may invalidate any warranty and doing it incorrectly could brick your drive. Built as well or better than every disc drive I've ever installed, and I've installed a few. Would recommend.

This is hands-down the best bluray burner I've owned and tested. The value is easily above every other drive. The features are about on par with the drives more than 3x the price, which makes no sense. READING: It doesn't play 4k BD by default and needs a hacked firmware flashed and MakeMKV just for playing 4k BD, but it will work. Aside from that, it hasn't had any issues reading any disc except the ultra scratched discs that other drives can't read either. WRITING: Compatibility with discs isn't perfect, but it's pretty wide that there are only a handful of discs this can't burn. I haven't had any issue with any name-brand (Sony, Verbatim, etc) discs in CD-R, DVD-/+R, DL, even 100GB BD discs. Off-brand discs might struggle (slower burns) or more rarely, fail entirely, though even most off-brand discs don't seem to have any issues most of the time. I've been slowly replacing all my older CD and DVD drives with these LG WH16NS40 drives as they die or when I get around to it.

DVD player/recorder work great! No software comes with the device however Win10 recognized and installed it just fine. Did 4 out of 5 stars because upon installing the DVD player into my tower case, went smoothly until I tried to plug in the data cable to the back of the unit. Without much force but enough to attach USB the cable to the back of the player, I was completely taken aback when the L-shaped tongue on the back of the player, snapped off cleanly from the back of the device. Upon closer inspection, the plastic injection molding looks to have had an air bubble in the plastic cast which made the L-shaped tongue, snap cleanly off. Which of course makes it impossible to attach a standard data cable... Very disappointed when this happened. I've I stalled probably 40 or more DVD players as well as countless other data peripherals and never encountered a problem like this, where the nub, on the back of the drive, snapped off upon plugging in the data cable. I believe this was a defective plastic injection molded data plug. Not a problem with the drive itself. But still, I have no working drive ATM and am a little ticked that this happened at all. I've yet to contact the merchant as it happened over Christmas and I've been playing catch-up until tomorrow. I'll write the vendor an email and see what they have to say about any exchange or a warranty if they'll do that. The drive is excellent, fairly quiet and very speedy ripping both regular and bluerays DVDs. It's now my favorite DVD drive,

As I write this review, Amazon is currently not offering this drive for sale themselves and only has it available via resellers. If your only question is "Is this drive reliable for writing to CD/DVD/BD/BD-XL discs?" then the answer is "Yes". If your question is "Can this drive have the firmware downgraded to UHD friendly firmware for ripping?" then the answer is also "Yes", but you're not going to like what I had to do to accomplish this. This drive shipped to me with firmware version 1.05, which is encrypted and is not considered to be "UHD friendly" for ripping UHD discs. Please note that I can't guarantee you that if you buy this drive and follow my directions that you will have success downgrading the firmware. I have over 30 years of IT work experience and I still had problems downgrading the firmware. First I tried using the SDFtool program that MakeMKV recommended. It failed. It did start up, but it displayed weirdly, not looking much like it was supposed to, although it did try to patch the LG drive. It failed with some kind of weird 5-6 digit hex error code. I didn't write down the code because there is no way to look up the code and see what it means. Not sure what the writer of SDFtool was thinking of in having it display this kind of error code. Then I did some internet searching and one guy swore that you couldn't use the graphical SDFTool but if you did command line patching instead, it would work. It didn't. Generated a different 5-6 digit hex code for failure. I checked and the firmware remained on 1.05. At this point I am running out of options, so I found that DVDFab says it can patch the firmware for you, but the tool to do so costs about $100. Sigh. I bought a package of this tool and UHD ripping software and hoped for the best. And spent a lot more than $100 on said package. On my first attempt to patch, it did start and seemed to run OK without generating an error code but the program became a run away and never ended. After 30 minutes I tried everything I could to cancel the program and nothing worked. I even tried throwing the power switch on LG drive and the program still refused to stop. DVDFab documentation said it should only take 2-3 minutes to patch. So I forced a hardware interrupt and rebooted my PC. At this point I think the LG drive was actually successfully patched, but I forgot to check, so I ran the DVDFab patching program again. Same response - it started and after 2-3 minutes it ran away, never to end. I left it alone for 30 more minutes and forced another hardware interrupt/reboot. At this point I remembered to check the firmware and it was downgraded to 1.02. The drive has worked flawlessly since the downgrade and can rip UHD discs successfully to my hard drive. Note that I used Vantec external device enclosures with a power supply on my BD drives. Some people have reported having problems changing firmware on BD drives in Vantec enclosures, but it did work OK for me. If you're not sure if paying this money to DVDFab and trying this is for you, MakeMKV does list some resellers who downgrade firmware on drives they sell. This drive has done everything I need it to do so I do recommend buying it.

I did extremely thorough research on the best blu-ray burner for burning m-discs for long term archival storage. I went with this despite it being less expensive, and having slighly lower rated reviews. There are two other blu-ray writers I could find with a higher rating on amazon. The negative reviews for this are mostly people saying it doesnt work well on windows 10, and that it doesn't burn the discs properly (particularly m-disc). I made the assumption that these issues were firmware or software related, based on my tech experience. People were recieving units with an outdated firmware, or were using lousy burning software such as cyberlink. When recieving the item, I was prepared to have to repatch the firmware and try out several reliable softwares to burn discs (ImgBurn, BurnAware, Nero). To my surprise, this unit is working flawless out of the box, on the first software I tried. No updates needed. On windows 10. I write the discs at the lowest speed to improve the write quality and lessen the chance of errors. The 25gb m-discs from verbatim are writing in approx. 15 minutes, plus 20 minutes for data verification. Every disc is writing beautifully and passing data verification 100% After writing to the discs, be sure to store them in a dark, cool, and low moisture environment. Plastic cases are better than the cheap paper envelopes. If you are using this for archival storage, it makes sense to put them in a high quality case. 30 years in a paper sleeve may not be the best idea. Nice case in a firebox or safety deposit box is the way to go. Also place them in tightly sealed ziplock bags as it may help further prevent moisture damage, which is what primarily kills discs, along with scratches from poor handling. All in all Im very happy with my new disc burner. I'll revise this review if I encounter any issues or the drive suddenly stops working after a week. Right now I give it 5 stars

Amazon didn't have any brand new LG BLU-RAY burners in stock, but they did have some used ones from their refurbished department do I decided to get. I figured if it didn't work or was having issues it'd be easier to return it to Amazon for a refund since they were on the ones that sold and shipped it. When I got it the burner was in great shape and when I tested the burner it worked fine without any odds noises or other issues. I don't play BLU-RAY disks the most, but now I have something that I can play CDs, DVDs and BLU-RAY disks. I can also burn disks and copy my original disks so they stay in good shape. If you use a program like DVDFab you can downgrade your firmware to make this drive 4k friendly. Using this drive unlocked with a program like MakeMVK you can copy literally any disk format.

First, a quick heads up, because some people might expect the drive to immediately be able to play Blu-Rays: as is always the case with Blu-Ray movie discs, you'll need additional software to actually watch films on them, regardless of how good or bad the drive is (unless someone out there has done some amazing aftermarket engineering I'm unaware of). Thank Sony for that barrier to usage. For a small headache (if you're new to playing with system files, etc.) you can get VLC media player to play Blu-Rays that are at least a year old or so. This drive worked natively for me in macOS Sierra, Windows 10, and Linux (Ubuntu 16). I didn't have to do anything at all with drivers or kexts. It working for me in macOS is a big deal--compatibility is a consistent concern for Hackintoshes. My previous Blu-Ray writer/reader, which had been somewhat recommended by the Hackintosh community, worked only about 70% of the time in macOS--not showing up after startup, disappearing after sleep, or having totally phantom discs "appear" in it. Conversely, this LG drive has never had any of those said issues!! Very minor hiccup: Occasionally when you click "import" in iTunes it says there's an error of some kind. Just wait 2-4 seconds and try again. For me it never permanently failed or crashed iTunes. This sucker is loud when ripping or initially reading a disc. But I read that it's because the drive doesn't throttle its own speed to keep quiet. I very much prefer high read/write speed to quiet operation. It's plenty quiet when there's no disc in there or it's finished initial reading of a disc and is simply playing it back at single speed (like listening to a CD or watching a Blu-Ray). But when you're ripping discs, it's a freakin chainsaw. And I love it. It rips those discs so darned fast, even when they're a bit scratched (I haven't tested any seriously scratched discs yet). It's far too early for me to address durability. But so far so good. It feels like it weighs less than other Blu-Ray drives, but that's not really a legitimate indicator of inferior quality. I'm not gonna be the lawyer in Jurassic Park lecturing a kid about night vision goggles, "Are those heavy?? Then they're expensive!"

ディスクドライブの不調による交換&某サイトでPS3のROM吸出しに対応しているということでこの製品を購入。DVD/BDの視聴からディスク作成、PS3のゲーム吸出しまで何でもこなす優秀なドライブです。高いだけの価値はあります。

El producto llegó antes de lo esperado ya lo instalé y funciona a la perfección el único pero que le pongo es que no venía en su empaque original pero aún así venía muy bien protegido y se compensa con que traía software cyber link en su versión oem que viene muy completo para grabar proyectos en Blu Ray cosa que el que viene en empaque original no lo trae se les agradece el detalle

Ottimo lettore bluray facile da installare che ha letto senza problemi tutti i dischi che gli ho fatto ingoiare. Soddisfatto.

Alle von mir gekauften Blue-Rays werden gerippt und auf einem NAS gesichert, um auf diversen Abspielgeräten im Haus zur Verfügung zu stehen. Da der externe Samsung Blue-Ray-Player schon recht betagt und ziemlich langsam war, habe ich den LG WH16NS40 (in ein Gehäuse von Icy Box verbaut) nun erstmals getestet und bin begeistert. Plus: Der Lautstärkepegel ist zwar etwas höher als beim Samsung, aber das wird durch die gut dreifache Lesegeschwindigkeit des LG mehr als wett gemacht (max. 300 gegenüber max. 80 FPS im Ripper). Minus: Der LG ist zickiger mit verunreinigten Discs. Die haben den Samsung nicht im mindesten irritiert, der LG (bzw. das Rip-Programm) produziert öfter mal Fehlermeldungen. Erfordert also etwas gründlichere Inspektion der Disc auf Fingerabdrücke oder sonstigen Dreck.

Fast