Autel TPMS Sensors Set of 4, MX TPMS Sensor 315MHz + 433MHz, MaxiTPMS Tire Pressure Sensor, Press-in 1MX Sensor Tire Sensor Programmed by TS408S TS508 TS508WF ITS600 MP900TS MS906 PRO-TS (Rubber Stem)

Works as should. OEM functionality and MUCH cheaper than OEM; so much better value. Especially if you have two sets of wheels/tires with summer/winter sets. Buyer beware, however. If the shop you take it to does not have the right tools for a 23 WRX, like mine, have them program it to a 21 Forester of their tool doesn’t go up to 2023. Both cars operate under 433mhz. The tire shop I went to originally programmed it to a 21 WRX, since the tool only went up to 2021. The 21 WRX operates at 315mhz and so the sensors will be happy as they’re 2in1, but my car did not recognize it. This took a few days of working with them until I found this on Reddit.

Nice high quality and just as advertised ! I would recommend for sure!

In brief, I was getting radio frequency interference from, of all things, a cell phone charger that fits into a 12 volt "cigarette lighter" power source. Nothing worked until I unplugged it and then it worked as expected. My autel TS408 would program and read data from all my autel mx sensors, but would not trigger the vehicle relearn procedure. I purchased the TS408 tool and 8 autel mx sensors from Amazon. I have a 2012 Ford F250 SD Super Duty. The TS 408 programmed all 8 sensors with auto create. I was able to read the information from all 8 sensors. However, the sensors would only trigger the relearn procedure on the Ford intermittantly, and never all 4 tires at once to complete the relearn procedure. I spent hours reading the manual, reading amazon reviews, watching youtube howto videos and repeatedly trying the relearn procedure. I updated the TS 408. I checked that the tire pressure is correct in all tires. I tried driving the vehicle for a few miles before the relearn procedure. I tested the sensors in different orders. Autel technical support returned my call and spent about 45 minutes with me on the phone. They were very polite, listened well, tried to troubleshoot, but ultimately were unable to fix the problem. I scoured the internet again, and found mentions of radiofrequency interference with the signal between the sensors and the RTM (radio transceiver module). The most common culprit mentioned were cell phone chargers. I unplugged the cell phone charger and Wow, it worked. Note other devices can also interfere, such as dash cam, radar detector, or GPS. Hopefully this review will help other buyers, as I suspect others are having the same problem. To Autel technical support, please be aware of this problem, as it is very frustrating and a quick easy fix.

These were installed a couple years back and still work great.

Ordered these in September of 2020 for my 2010 Ford Explorer. They've operated flawlessly since. My 2011 Ford Escape now needs a set. I'm ordering the same set and expect the same great result.

Terrible product. Lasted less than 2 months before the battery was dead on all 4. Would not by again. Do not recommend. Dont waste your time or money.

Great product and cheaper than factory. But need to be programmed

Easy programing. 2025 Ford explorer recognized it right away.

Excellent

They work perfectly Highly recommend

It works well on my 2023 4runner and i used ts508wf programming tool btw. At first, i made a mistake by installing the tpms first to my winter tires before registering ID. It will not read the sensor once you installed before registering. Luckily, before i stored my summer tire, i wrote which one is LeftFront, RF, RR, Left rear. So i did copy by activation from my summer tire and followed the steps and from there i was able to clone the ID's from my summer tires to my unregistered installed tpms on my winter tires. Once the cloning is finished, i did tpms diagnostic for all tires and insert obd2 port. Voila!! Problem solved. Lights came off.

سيئ

Bought 2 sets (8 sensors) and spend over $400. Can't program it and can't return it because my return time expired. Verry UNHAPPY !! After an unhappy beginning, I contacted the seller and their technical support was amazing. It ends up being software in my Autel TS508. Had to be updated. After their suggestion programming worked very well and I'm ordering more sensors from them.