Camco 07723 WH9 Lower Thermostat - Apcom Style

Thought my element died and was ready to make a mess in the basement. Turns out this guy was the culprit. Easy to swap and works 100% Just double check your part number make sure you get the right one. There are different styles

Awesome. Took 5 minutes to install and totally solved my problem!

Product was great , however was delivered behind my deck on the firewood pile , far away from the door , I wasn't happy about that

Replacement value: Just what I needed and in a pinch too. No issues after install. Ease of installation: The hardest part of any part installation is removing the old one. This went on perfectly. I even remembered where my wires went.

Was having trouble maintaining hot water in a 50 gallon tank. Replaced both the upper and lower elements due to the lower element being shorted out due to corrosion. A couple of weeks later, was running out of hot water again. Checked both thermostats and the lower one was bad. Decided to go ahead and replace both thermostats. Installation was a snap and both thermostats are better than the "universal fit" sold at the big box stores. In short, plenty of hot water and noticed a significant drop in utility bill.

My Reliant water heater quit working and after inspecting it I found out the lower thermostat has burn out. This thermostat looked exactly like the burnt one and according to the description it was compatible with this model. I was pleasantly surprised it also came with the little white plastic cover to separate the cap fiber insulation from the thermostat. Installing it was very easy, the little metal tabs on it clicked in the slots and locked it firmly in place. I reset the upper thermostat, which had tripped when the other one burned, and now everything is working again.

When my water heater is going crazy (either too hot or too cool), and it is not dripping (leaking), this simple fix is quick, cheap, easy, and effective. I keep a spare on hand, since appliances tend to fail on weekends or just before house guests arrive.

Installed on a Bradford White m240t6ds2 40 gallon water heater. Not much else to say except this worked perfectly. I recommend replacing the top thermostat also. The matching one for the top is a camco WH10A. My thermostat kept tripping the reset button for the top thermostat and replacing both fixed the issue. No more waking up to cold showers and having to reset the water heater. Simple to install, just make sure you turn off the power to the water heater before replacing it and snap a picture of how the wires are arranged Incase you need a quick reminder where they go!

By looking at the picture, I used it for A.O Smith hot water tank. It attached to the tank by the side hooks and holding very well as the original thermostat . Worked perfectly … Happy camper .

10/10 exactly the right part and Made In America!

Had a tank that was 10 years old had started tripping the breaker on the thermostat after over heating. The wiring on the bottom unit had actually heated up to the point that it melted the plastic on the lower heater. First I had removed the elements and cleaned them off. They were caked in mineral junk! After reinstalling them, it would still trip daily. After installing this and a W10 (top one) my problems have stopped completely.

Works good, old one after 6.5 years would stay on and not turn off at set temp.

Arrived quick, and matching exact the description, appears good quality! Recommend!