---
product_id: 47702491
title: "Prozix Amber PEI Sheet 3D Printer Build Surface 220mm x 220mm Ultem 1000 Build Surface for Anet A8, Anet A6, Reprap Prusa 13"
brand: "prozix"
price: "C$2388"
currency: NIO
in_stock: true
reviews_count: 8
url: https://www.desertcart.ni/products/47702491-prozix-amber-pei-sheet-3d-printer-build-surface-220mm-x
store_origin: NI
region: Nicaragua
---

# Prozix Amber PEI Sheet 3D Printer Build Surface 220mm x 220mm Ultem 1000 Build Surface for Anet A8, Anet A6, Reprap Prusa 13

**Brand:** prozix
**Price:** C$2388
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** Prozix Amber PEI Sheet 3D Printer Build Surface 220mm x 220mm Ultem 1000 Build Surface for Anet A8, Anet A6, Reprap Prusa 13 by prozix
- **How much does it cost?** C$2388 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.ni](https://www.desertcart.ni/products/47702491-prozix-amber-pei-sheet-3d-printer-build-surface-220mm-x)

## Best For

- prozix enthusiasts

## Why This Product

- Trusted prozix brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

PEI (Polyetherimide) , also known as Ultem, is a reusable, relatively maintenance free. Perfect build surface for both ABS ( Heatbed 100°C) and pPLA (Heatbed °60), other materials such as Metal, Wood, ABS+, ASA,PETG and many others also works just fine. PEI sheet is appealing due to its “no-surface-prep” conditions, which make it convenient to work with. Additionally, printing on PEI sheet requires no support rafts as parts adhere directly to the surface with no issue. Say good bye to Blue Tape and ABS Slurry. Last couple months to years depend on the usage.

## Images

![Prozix Amber PEI Sheet 3D Printer Build Surface 220mm x 220mm Ultem 1000 Build Surface for Anet A8, Anet A6, Reprap Prusa 13 - Image 1](https://images-na.ssl-images-amazon.com/images/I/8191OfaxCXL.jpg)
![Prozix Amber PEI Sheet 3D Printer Build Surface 220mm x 220mm Ultem 1000 Build Surface for Anet A8, Anet A6, Reprap Prusa 13 - Image 2](https://images-na.ssl-images-amazon.com/images/I/41xyrOis1fL.jpg)
![Prozix Amber PEI Sheet 3D Printer Build Surface 220mm x 220mm Ultem 1000 Build Surface for Anet A8, Anet A6, Reprap Prusa 13 - Image 3](https://images-na.ssl-images-amazon.com/images/I/51BCMeZZBkL.jpg)
![Prozix Amber PEI Sheet 3D Printer Build Surface 220mm x 220mm Ultem 1000 Build Surface for Anet A8, Anet A6, Reprap Prusa 13 - Image 4](https://images-na.ssl-images-amazon.com/images/I/91Kmxu86D0L.jpg)

## Customer Reviews

### ⭐⭐⭐⭐⭐ 







  
  
    Works as expected for stock Anet A8 3D printers.
  

*by B***E on Reviewed in the United States on May 21, 2018*

Applied easier than expected to my stock Anet A8 heatbed, no real issues with the adhesive and prints are still sticking wonderfully over 100 hours of printing later.Beforehand, I had been having a heck of a time getting PETG to stick to my printing surface despite trying blue tape, glue, hairspray, and all the other home remedies found on printer forums. After coating my surface with PEI, I can now say that I haven't lost a single print to lack of adhesion. It really has been a massive QOL improvement compared to my previous setup.Note: Since PETG has a history of over-adhesion to PEI, be sure to only clean the print bed with Windex or other similar window cleaner. If you use isopropyl alcohol for cleaning you'll end up with prints fusing to the print bed or taking chunks of the bed with it during removal, so be careful!

### ⭐⭐⭐⭐⭐ 







  
  
    Great stuff to use on your DaVinci Uno 1
  

*by D***R on Reviewed in the United States on January 18, 2018*

Great stuff to use on your DaVinci Uno 1.0  heated bed when it starts to chip.  Clean the bed as well as you can, trim the PEI sheet to fit  between the metal feet holding the glass (test fit no fewer than 3 times, marking the front!!), peel a wee-little of the backing along one edge (the back) and CAREFULLY position (as close to VERTICAL as you can get), slowly lay almost flat and peel - flattening and peeling as you go (I started from the back).  If you screw up the positioning though, well, yer literally stuck.I placed this directly on the existing chipped glass as an easy fix (kinda like self-leveling concrete) - doing so requires **manual** calibration afterwards.After sticking it on, I buffed it out with 1200 grit paper and wiped it down with IPA. Prints stick amazingly well now.

### ⭐⭐⭐⭐⭐ 







  
  
    This just works and it works well
  

*by S***T on Reviewed in the United States on January 25, 2018*

I've tried a number of different build surfaces over the past year and this has been the only one that actually worked. I've always had difficulty getting ABS to print and with this build surface it just worked right away. I did scuff it up with some 600 grit sandpaper as recommended and I had no problems getting the first layer to adhere. I print with a bed temperature of 100c in an enclosure and I get no warping and the bottom surface is nice and smooth. The part is also easy to remove once the bed cools.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.ni/products/47702491-prozix-amber-pei-sheet-3d-printer-build-surface-220mm-x](https://www.desertcart.ni/products/47702491-prozix-amber-pei-sheet-3d-printer-build-surface-220mm-x)

---

*Product available on Desertcart Nicaragua*
*Store origin: NI*
*Last updated: 2026-02-03*