TOTMC® Arduino Wireless Bluetooth Serial Pass-through Transceiver Module HC-06 RS232 TTL UART Slave + Cable
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5

TOTMC® Arduino Wireless Bluetooth Serial Pass-through Transceiver Module HC-06 RS232 TTL UART Slave + Cable

ID del producto: 9084562
Transacción segura
Comprados juntos con frecuencia

Descripción

  • Compatible with Arduino, Stamp, FPGA, AVR, PIC, ARM, MSP and more!
  • After pairing when full duplex serial port to use, support from 1200bps ~ 1382400bps
  • Coupled Mode: Two modules will establish communication automatically when powered. PC hosted mode: Pair the module with bluetooth dongle directly as virtual serial.
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices
  • Default serail port setting : 9600 1 Pairing code : 1234

Bluetooth protocal : Bluetooth Specification v2.0+EDR Frequency : 2.4GHz ISM band Modulation : GFSK(Gaussian Frequency Shift Keying) Emission power : Sensitivity : Speed : Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps Security : Authentication and encryption Profiles : Bluetooth serial port CSR chip : Bluetooth v2.0 Wave band : 2.4GHz-2.8GHz, SM Band Protocol : Bluetooth V2.0 Power Class : (+6dbm) Reception sensitivity: -85dBm Voltage : 3.3 (2.7V-4.2V) Current : Paring - 35mA, Connected - 8mA Temperature : -40~ +105 Degrees Celsius User defined Baud rate : 4800, 9600, 19200, 38400, 57600, 115200, 230400,460800,921600 ,1382400. Pin definition : * PIO8 connects with LED cathodea with 470ohm series resistor in between. LED NEGATIVE connects to ground. It is used to indicate the module state. After powered on, flashing intervals differ in different states. * PIO9 is used to control LED indicating paring. It will be steady on when paring is successful. * PIO11, module state switching pin. HIGH -> response to AT command; LOW or floating -> regular work status. * With build-in reset circuit, reset is completed automatically after powered on. * Steps to set to MASTER: * Set PIO11 HIGH with a 10K resistor in between. * Power on, module comes into AT Command Response Status * Open HyperTerminal or other serial tool, set the baud rate 38400, 8 data bits, 1 stop bit, no parity bit, no Flow Control * Via serial port, send characters "AT + ROLE = 1 r n",if successful, return "OK r n", where r n is carriage return. * Set PIO11 LOW, re-power, then in Master state, automatically search for slave module and connect.

Preguntas comunes

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Por Ravi S.

Me encantó la variedad de productos disponibles. Definitivamente volveré a comprar.

Hace 2 meses

Reema J.

Plataforma perfecta para artículos difíciles de encontrar. La entrega fue rápida.

Hace 1 mes

Compre globalmente, ahorre con Desertcart
Valor por dinero
Precios competitivos en una amplia gama de productos.
Compre globalmente
Sirviendo a millones de compradores en más de 100 países
Protección mejorada
Opciones de pago confiables que adoran los compradores de todo el mundo
Garantía del cliente
Opciones de pago confiables amadas por los compradores de todo el mundo.
Aplicación DesertCart
Compre sobre la marcha, en cualquier momento y en cualquier lugar.

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Alí H.

Envío rápido y embalaje excelente. La herramienta Leatherman parece de primera calidad y resistente.

Hace 1 día

Por Neha S.

Excelente comunicación durante todo el proceso de pedido. El producto es perfecto.

Hace 2 semanas

Totmc Arduino Wireless Bluetooth Serial Pass Through Transceiver Module Hc | Desertcart Nicaragua