Stak Rack | 6 in 1 Painter's Accessory Tool | Stacking Design | Paint Interior or Exterior Doors, Trim & Kitchen Cabinet Doors| for Contractors & Homeowners (4)

I had 4-36 inch interior doors that I wanted to pre-finish before I took them to the job. With these little tools I was able to put a nice spray finish on both sides of the doors in a relatively short amount of time. These were solid core doors so they were pretty heavy and you definitely want to have Help flipping something like that over and stacking them but with a little care they worked great. I wouldn’t want to use them on cabinet doors because of the hole that it leaves in the bottom and top edge of the door, but for Standard interior or exterior doors that’s not really an issue. They are definitely a little pricey but they are well-designed and get the job done.

Great product. Started building cabinets and these save so much time. They speed up painting and are easy to use.

The Stack RAK system has been a big improvement to how we paint doors on job sites. It’s well-designed for efficiency — stacking, flipping, and spraying doors is faster and more organized. We’ve used it for multiple interior door projects, and it definitely speeds things up. The only reason I’m giving 4 stars instead of 5 is that the hardware isn’t the highest quality — we had to replace a couple screws after a few uses. That said, once it’s set up, it works as advertised and makes a noticeable difference in workflow. If you regularly paint doors, this is a smart investment.

These are wonderful! We used them to stack doors that we needed to sand- made it easier to work in a smaller space without doors having to be in the way while we sanded each one. Very durable, sturdy, and easy to use. Highly recommend getting some for your next project.

My wife and I are in the process of painting our basement (ourselves) and without this product I wouldn't have been able to paint 5 doors at the same time because of space. Our basement is already finished so we had to use the extra space in our garage for our sprayer. Out of the box, stackracks are really easy to set up (highly recommend watching the various YouTube videos before you begin) easy to use, and made things go a lot smoother. The only challenge we faced was that our doors were of different widths so in order for them to stack on one another and pivot with enough clearance, we had to compensate for those differences. Before I installed the stackracks, I had all of the doors on top of one another (on my saw horses) I lined up the edges and marked 2 inches inward and drew a line straight down. That was the side in which my doors will pivot. On the other side, I measured 2 inches inward on the smallest door and used that as my mark for the other side. I wouldn't be able to pivot from that side because while it was 2 inches on the smallest door, it turned out to be 4-5 inches inward on the largest. My only negative would be that they are on the pricey side compared to other products. However, I was impressed buy the quality/durability and can tell they are built to last.

The racks did provide the ability to flip the doors making it possible to paint at one time. So the Stack Racks work as advertised. The arms I also purchased were stressed and bending from the door weight. The arms could be slightly increased in strength and would provide better support. The arms could also benefit from a slightly larger offset. The paint builds up after two / three coats and dripped onto the cabinet door edge. I also did not use the supplied screws as they would have protruded over the door and caused paint build up to drip too. I highly recommend the Racks but not the arm kits. I also want to reiterate that the Stack Racks are not included with the door kits. This not clear in ordering and it does not let you know you need to order the racks as well. I did see this complaint in the reviews from others.

8 foot 36 wide, these did the job without the need of. Ladder.. :)

I was put off by the price of these, but considering the amount of wood I need to stain and paint (10 pallets of tongue and groove), I bit the bullet and ordered three packs of 12. They are very simple pieces of plastic that probably cost a dollar each to manufacture so the price really is offensive, but after staining 48 boards in a couple of hours with this system I was a believer! Very much a game-changer, and I ended up ordering 3 more packs! Today I stained 96 boards in 5 hours, and only took up a 10x 8 foot space. Highly recommend, if you can afford it.