Vision S 4.3" Single Camera System with Sharkfin Camera

I installed this in about 10 minutes on a Rockwood Roo, but the Roo was prewired for the camera. If your rig isn't prewired, there are extra steps you will need to take to make this work for your setup but those are outlined in the install instructions. For the prewired Roo, it already had the black fin plate attached to the back of the rig so I didn't have to drill or caulk anything and honestly it took more time to lug out the ladder than it did to install this whole setup. The first step is to pair the camera with the monitor, which was pretty easy. Plug in the monitor to the cigarette lighter/adapter in the car, then plug the camera into the split wire connection (the monitor power wire has a split connection that you plug the camera into), turn the monitor on and it pairs. You may have to hit the menu button on the side of the monitor and select pairing, but the whole process was very simple. Second step was to install the camera. On the Roo there is a black attachment at the top of the back of the rig that looks like the case the camera is in but without the camera. Essentially you remove the camera from the factory case and mount it in the case already on the rig, which is very easy. On the RV case there is a small plate where the camera mounts which is held on by 4 screws, just unscrew the plate but don't lose the screws because they are very small. Then remove the camera from the case it is installed in and plug the camera into the wire preinstalled in the rig, push the wires back into the case on the rig, then attach the camera with the 4 screws. It is really very easy if your rig already has the black fin case already attached. Finally, adjust the camera to the angle you want and you are set. The monitor attaches to a suction cup which then attaches to your windshield. The monitor plugs into the cigarette lighter/adapter for power. I added a small velcro strap to the wire to bundle it. Overall it has excellent picture quality and is very easy to install and easy to adjust the camera angle. You just "click" the camera up or down by moving it and it stays in place. It does not move at all even when going over rough roads. I used it while driving and had no issue with picture loss and everything was real time. I could see cars coming up on either side of my rig without having lag issues. Also I did not have to "mirror" the image. Cars coming up on the left appeared on the left of the screen, cars on the right appeared on the right, no problem at all. You would just have to double check your connection to see if you would need to mirroe the image. Now for the "CONS". The monitor and the power cord. I hate cords hanging all over the place and this cord is long. I just used a velcro strap to bundle the excess wire and it seemed to work fine but because they used a bulky ciagrette lighter type adapter plug, it stuck out and kept getting in the way until we got use to it being there. I wish they would have thought about using a USB cord to power the monitor because then I wouldn't have had the huge adapter getting in the way. Honestly though, that would be my only real complaint. Overall the camera and monitor are an excellent addition to my rig. My only suggestion or recommendation to Furrion is to work on making this iphone/android compatible so that the monitor setup could be replaced using a phone or tablet. But again, this is a great setup for my rig.

UPDATE 11/1/2020: I have used this for several months and trips. It has performed without any problem. I really like using it as a rear view mirror. Can clearly see when another driver is tailgating me, especially small cars that can hide behind the trailer. It makes backing into a back-in campsite very easy; the guidelines let me know when I am lined up straight, no more jockeying with wife waving one way or the other to get into the campsite. No more swiveling my head right and left to look in the side mirrors, no blind spots. Oh what a joy it is! Feb. 15, 2020: I bought this unit because the trailer was prewired for it. I wanted this camera to be on so I could use it as a rear view mirror while traveling so rewired the camera to a waterproof switch next to the batteries. Now I can use it when traveling without having to turn the vehicle/trailer running lights on. The picture is clear. The description says it has infrared for night time but so far this is not working for me, the image is just black; manual says it will be in black/white when using the infrared. I will adjust the brightness/contrast to see if that solves the issue. It would be easy to install if connecting to the trailer clearance lights if not already prewired by the manufacturer. Mine was a little more complicated as I needed to run a new wire from the battery bank to the location on the trailer rear panel. Due to foam insulation I had to run the wire inside the cabinets, I used surface wire conduits to do so. Took a while but I have a clean install and it works the way I want it to. I recommend this device even if it is on the expensive side; I think it could be half the price. You can get side cameras but I would recommend the larger display if you go that route as they are picture-in-picture.

Our 2019 Cougar 5th wheel camper came prewired for a Furrion rear mounted wireless camera. The trailer is about 37 feet long and this wireless camera works great. It provides a great view of the rear accessory hitch area allowing a great view of your bikes, portable generator or whatever else you might be carrying back there. It was easy to install with the provided wiring and instructions. When you're carrying valuable cargo, I think this camera is a great value. Nov. 2025 UPDATE: I used this camera extensively this summer and I absolutely love it. I'd give it 10 stars if that was possible.

I plugged this into the cigarette lighter and had to hold it in really tight to make it work. Sometimes it wouldn't turn on at all. Was not able to use it yet because of the bad connection..why use a cigarette lighter cord? I bought a USB converter cord; converts from 5 amp that USB delivers to 12 amp that the monitor needs. Bought on Amazon: USB to 9v, 5v to 12v Step Up, DROK USB Cable DC 5V Boost to 9V 12V Voltage Converter 1A Step-up Volt Transformer Power Regulator Line with LED Display. Just went and tried it out and it worked perfectly. Comes with a smaller attachment and you plug the larger attachment into that. The screen turned on immediately. The camera was easy to hook up as my camper already had wiring for this specific back up camera; just remove the casing and pop the camera in with an easy attachment. It connected with my monitor right away AFTER I realized that the camper electric has to be connected to the car and the running lights need to be turned on in the camper. It will not recognize camera without that. We backed in without it so i'm anxious to see how it works now that I'm actually able to turn monitor on. They really need to change the cigarette lighter connection to USB. Many cars don't even have that anymore and the connection is only iffy and frustrating.

My 2022 Grand Design Solitude was pre-wired, which made it extremely easy! The only snafu was a less than excellent job pre-wiring the trailer, the positive lead had come apart on their very poor crimp job. Other than that a seamless installation!

Very well . Good vision. Very easy for install.

Works great for my trailer

We purchased the Furrion back up camera system over a year ago and are very impressed with it . I have owned both the 7” and the 4.3” monitors . There are so many things to like about the furrion camera system but the main thing is it works all the time . We have yet you loose connection between the monitor and the cameras well using it . This is by far the most refined camera system on the market . You may find other back-up cameras out there for a lower price or that claim better spec but trust me if you don’t wanna mess around , this is the back up camera system to go with . The camera system is expandable for up to four cameras if you have the 7” monitor , if you have the 4.3” it is for the back up camera only . As mentioned we upgraded to a 7” monitor and are now running furrion back up Cameras with the furrion side cameras . This has basically removed the need for my wife to attempt to guide me well backing up . This is a huge game changer because this was usually the only arrangements we would get into well camping ( “ I don’t know what all your flaying arms mean”:) ) the best part is the camera has a micro phone so if need she can talk to me through the camera ! The night vision on these camera is also amazing which is great for those days where you arrive at the camp site after dark . The monitor is touch screen easy to use and includes a variety of mounting solutions. The picture is very good and there is basically zero lag time . Install is super easy , if your camper is prepped for a furrion camera ( most campers after 2018 are ) all you will have to do is remove the four small screw from the camera cover on the “ shark fin prep cover “ , plug in the camera to the connection behind the cover , mount the camera where your prep cover was . That’s it ! your done , go plug the camera into your truck and it should work … if not you just need to running the pairing option in the manual . If your trailer is not prep it will take you about an hour to install . I won’t go into detail as there are many options amd way to do it . Mine was not prep so I can say it’s honestly an easy 1 hour diy . If you have small children this really gives an added value of safety knowing a kid is not directly behind your trailer . Honestly I would recommend this to anyone with a travel trailer , rv or motor home . It just takes all the stress out of backing up a trailer .

After a purchasing a Furrion "compatible" back up camera for our RV and being quite disappointed (which we promptly returned) we decided to go with an original Furrion since our RV was pre-wired. It is absolutely plug & play - we had the camera installed and the monitor set up in less 20 minutes. The monitor (ours is the 5" model) is beautiful quality; light and easy to attach to the windshield. Although it is capable of using up to 4 cameras, we are only using it for one at the rear of the unit. We've recently used it for parking our RV and it worked perfectly, giving a large field of view. It also has an audio function where the driver can easily hear someone at the back of the unit providing direction if needed, so the microphone has good pickup. In theory, that person could converse with the driver but, for me (the directing person), the camera speaker is too high to clearly hear anything being said. May work well for someone who doesn't have hearing issues though. Although the cost was considerably higher than the original "compatible" kit we ordered, I think it was ultimately worth the money. I would recommend the Furrion Vision S, particularly if you have a pre-wired RV.

camera arrière avec haut-parleur (peut ajuster le son) et la personne qui est derrière la roulotte (FW) peut communiqué avec le chauffeur entend ça voix et comprend bien bonne vision couleur (Le prix n'est pas donné mais vérifier avec d'autres vendeurs c'était le fournisseur le moins dispendieux au moment où je l'ai acheté) N'oubliez pas il faut toujours ajouter les taxes. J'ai aussi les caméras de gauche et droit très bonne vision(avant d'installer vos caméra vérifier s'il n'a pas d'obstacle nuisible à la vision)(ex: le bras de l'auvent peut être une obstacle à votre vision)

I purchased this back up camera for my travel trailer. It was easy to install as my unit was prepped for it. However, I had to figure out that the lights had to be turned on in order for it to work (I usually have my lights set to automatic). The image is very clear and you can see quite a wide area. I would highly recommend spending the money for this back up camera.