UTP-6 12.8w/mk Thermal Putty for VGA GPU IC Processor Rapid Cooling Thermal Pad Replacement Heat Blocking Putty High Performance (10g)

Worked great and easy to apply. One unit was enough to replace all the thermal pads from an RX6600.

Works really well in dropping temperatures. Guaranteed will get a drop in vram temperatures versus stock. Dont use on the gpu die and use ptm 7950 for that instead

Good quality definitely recommend.

This stuff works great. Helped my temps out but was kind of expensive. Done people say it's dry and crumbling but when you get it, open it and see if it's softer than playdo. If it's dry send it back. Mine was soft and easy to mash down when installing heatsink on my laptop. 20g barely did an Acer Predator Helios Neo 16S AI. Negative 1 star for cost to amount.

I recently redid my gigabyte RTX 3090, 2023 zephyrus g14, & a 2020 zephyrus g14. When I was replacing the old thermal compounds, I used this on the memory chips, power delivery, and other ICs that were covered in thermal pad material. This stuff actually provided a little bit lower temperatures than K5 pro. The device I tested the hardest was a 380 and the memory junction temperatures went from 90C (k5 pro down to 78C max.). I used 3d mark to stress test my GPU for 2 hours. I forgot to turn on my portable ac before going to make food. So that max temperature is what was achieved in a bedroom that hit 80°F(26.6C) inside. The gigabyte 380 requires a thicker application because some of the thermal pads 2 or 2.5mm thick. I don't remember the improvements on the two zephyrus laptops, but it was better than the factory stuff. The thermal putty does like to stick to the little stick after sooping a few times, but scraping the stick off back into the container and then re-scooping helps to stop accidentally picking the putty back up off whatever you're applying it to.

I used this on two RTX 3090 Founders Edition cards that were hitting memory temps of 109°C. Swapped the stock pads out for this putty, threw on some Honeywell PTM7950 on the GPU core, and now the highest I see under the same load is 89°C on the memory chips. That's a massive difference and I'm happy with the results. The putty is soft and easy to mold so you just press it onto whatever shape chip you're working with and squish. No cutting pads to size, no guessing thickness. Fair warning though, you'll need more than you think. I went through about 100 grams just on the memory chips across two cards. Budget accordingly if you're doing multiple GPUs. It's a little pricey compared to other pads but honestly after seeing these results I don't care. Ordering was fast and everything showed up in great shape. If your GPU memory temps are out of control, just buy this.

"Si eres de los que desarma su laptop gamer o su tarjeta gráfica y se encuentra con esas almohadillas térmicas (pads) resecas y aceitosas, esta masilla es tu salvación. Le doy un 10 rotundo porque soluciona el problema más grande de los pads tradicionales: el grosor perfecto.

The 10grams option is not accurately represented by the photo. My surprise was the container was only a 6th to a 1/4 full. I based my purchase off the volume pictured. I did in fact verify it was in 10 grams on my scale. Now I have to buy more

El producto llegó en buenas condiciones, lo probaré estos días y actualizaré mi opinión

Awesom

Impressive performance

Excelente producto para remplazar thermalpads

Good thermal putty for laptop VRMS. Use ptm7950 for cpu and graphics card.