360° Spin Stand for Google Pixel 9 Pro XL Case, 12FT Military Grade Drop Protection, Compatible with Magsafe, Shockproof Slim Pixel 9 Pro XL Phone Case with Kickstand & Ring Holder, Black

No doubt,quality is very good. Fitting is very good. But in India they are selling it at a very high price. Logo of Google can not be seen from backside with mobile cover

Ich bin absolut begeistert von der Torras Hülle für mein Google Pixel 9 Pro XL! Schon beim Auspacken merkt man, dass hier auf Qualität geachtet wurde. Die Hülle fühlt sich hochwertig an, und das Material ist angenehm griffig, ohne dabei klobig zu wirken. Design: Die Hülle sieht elegant aus und passt sich perfekt dem schlanken Design des Pixel 9 Pro XL an. Sie trägt kaum auf und erhält die tolle Haptik des Smartphones. Zudem sitzt sie fest, ohne dabei die Bedienbarkeit der Knöpfe oder den Zugang zu den Anschlüssen zu beeinträchtigen. Schutz: Was den Schutz angeht, bin ich mehr als zufrieden. Die Hülle bietet sowohl an den Ecken als auch auf der Rückseite eine solide Stoßdämpfung, ohne das Gerät zu schwer oder dick zu machen. Besonders gefällt mir der leicht erhöhte Rand um das Display und die Kameras, was einen zusätzlichen Schutz vor Kratzern bietet, wenn man das Handy auf den Tisch legt. Der integrierte Ständer: Der Ständer ist eine geniale Ergänzung! Er ist stabil und lässt sich problemlos in mehreren Winkeln einstellen, sodass man Videos schauen oder Videoanrufe führen kann, ohne das Gerät in der Hand halten zu müssen. Die Handhabung ist super einfach, und er klappt sauber und sicher in die Hülle zurück, wenn er nicht gebraucht wird. Fazit: Ich kann die Torras Hülle jedem Pixel 9 Pro XL - Besitzer nur empfehlen! Sie bietet hervorragenden Schutz, sieht klasse aus und der integrierte Ständer ist das i-Tüpfelchen, das die Hülle von anderen abhebt. Absolut 5 Sterne!

I'm very satisfied with this phone case. To start with, it was very easy to put on the phone. You don't need much force or nimble fingers to get it done. The general quality and feel of the case is good, and it looks very good in my mind. It also feels nice in hand. There are no visible signs of wear yet (although I also haven't dropped it yet). The surface of the case isn't especially slippery, so, as mentioned, I haven't dropped the phone once when using the case. The edges around the display and camera are raised enough to protect those surfaces in normal situations. One important reason for me to choose this case was the stand, which according a couple of more in-depth reviews I found works very well, better than stands on some other cases. I haven't had a case with a stand before, but I can confirm that at least during the first month of use the stand has worked extremely well. It has just the right balance between stiffness and adjustability so that at the same time using it is comfortable and the phone stands at the angle I want it to stand without falling down or wobbling.

Edit: So they did offer me a full refund on the case due to the issues I had with it, which is nice, but not the reason I'm increasing my review from 3* to 5*. They actually specifically said in the message to *not* increase the rating based on the refund. The reason I'm increasing my rating is that they were actually interested in my feedback and not only gave their rationale for the specific issues I brought up after asking their R&D team about it, but also were appreciative of the feedback and stated they'd work on the issues in future production. That sort of humble dedication to improve is quite rare to see these days, and I'm hoping that with the refund given I'll be able to buy a future model that resolves the issues in this one. Also, the stand is still fine for now, hasn't broken yet. For the price of this case, I think it has too many problems. The case itself looks nice and feels tough enough, though I luckily haven't had to test it against a drop just yet. I do see that people have been commenting about it being too slippery, but I actually disagree with that complain completely. The material on the *back* is slippery, but the material on the *sides, top and bottom* is using a slightly textured, grippy material. The sides, top, and bottom are the main points of contact for holding a phone...I hope people aren't trying to hold it by placing their fingers on the flat back of it. I think the back being smooth is actually a positive, and the grippy material does slightly wrap around to the back all along the outer perimeter of it, giving a bit of grip on flat surfaces too. The issues I've run into, however, are that the camera does not actually fit snugly in the camera cutout. The cutout is too large for the camera, and also positioned slightly too high, leaving a visible gap all the way around the entire camera where dust, debris, and/or spills could easily get inside the case and just be stuck in there. The gap is also larger at the top, above the camera cutout, so it's not even even across the whole thing. The magsafe component appears to block the use of NFC entirely, as the NFC works fine on my phone without the case, but won't work at all once the case is on it. This means I can't quickly transfer contacts or small files, and also can't use tap to pay with my phone, which is a major downside. That smooth back material also smudges with fingerprints quite badly. Finally, the magnetic ring is also quite hard to open with just one hand on the device when you don't really have long fingernails. One of the main uses of a pop-socket, which this is emulating, is being able to grab it with one hand and have a good grip, so that's a bit failure in design as well. I do like the ring otherwise, particularly as a stand. However, the ring is already starting to feel quite tight in its ability to turn and move, so I'm worried that it's going to fail sooner than later. For the time being I'm still going to use the cover as it's what I have, and overall it's a fine cover. That said, if the ring does end up failing on it, I'll be changing to a 1 star review and returning it.

Okay, so I recently snagged the TORRAS 360° Spin Magnetic Stand case for my Google Pixel 9 Pro XL, and honestly, I'm pretty impressed. You know how you get a new phone and then the hunt for the perfect case begins? Well, I think I might have found it with this one. First off, the stand is a game-changer. It's super sturdy, and the fact that it spins 360 degrees is way more useful than I initially thought. Whether I'm watching videos in landscape or video calling in portrait, it just works. Plus, the magnetic hold feels really secure, so I'm not worried about my phone slipping off my magnetic charger. The case itself feels really good in my hand too. It's not too bulky, which is a major plus for me since the Pixel 9 Pro XL is already a pretty big phone. It seems like it offers decent protection too, although thankfully I haven't had to put that to the test yet! But here's where it gets even better: the customer service. I actually had a tiny little issue with my order and I reached out to TORRAS. Seriously, the response was lightning fast, and the person I talked to was so helpful and genuinely wanted to sort things out. They went above and beyond to make sure I was happy. It's those kinds of experiences that really make a difference, you know? It makes you feel like you're actually dealing with real people who care about their customers. So yeah, overall, I'm really happy with this TORRAS case. It does exactly what it says it does, and the added bonus of fantastic customer service just seals the deal. If you've got a Pixel 9 Pro XL, I'd definitely recommend checking this case out. It's a solid buy!

For my needs, this case is wonderful. The design feels premium, the built-in stand/spin feature is both practical and stylish, and it fits my Pixel 9 Pro XL perfectly. The grip and finish give it a solid feel without adding too much bulk, which I really appreciate. The only thing keeping it from being perfect is the magnet — it works, but if it were just a bit stronger, it would be flawless. Still, it’s one of the best cases I’ve used, and I’d definitely recommend it.