Carrier Blower Motor 5KCP39GGZ183S 1/3 hp, 1075 RPM, 115V Genteq # 3S044

Put this in my Carrier 58mca080-12, was a perfect fit, used the ratchet band from original motor. Wire colors and diagram were exact same as original, as was the motor brand (might have been replaced once by a repair service though, I can't recall). All wire ends fit on mother control board pins, fan fit well on shaft (though I think the shaft was a bit longer than original), and she fired up without complaint when i flipped the switch. 1/3 the cost of same motor on an appliance repair site I normally use. Probably saved 1k with this part and a little elbow grease.

Put this motor in my furnace about 5 years ago and it still works perfect. Saved me having to figure out replacing my furnace. Definitely will get another.

I highly recommend the motor it is the perfect replacement for the original GE motor on my Carrier Weathermaker 8000. All wires are the same color as the original and the connectors are all the same size as the original. The original motor mount fit perfectly and the shaft length of the motor fit inside the blower housing with no cutting required. The included capacitor is the same make as the heavy duty Grainger capacitor I bought 2 days earlier when I thought the capacitor was the only issue before the old motor quit working.

Exactly what was described in description, straight forward installation and functionality and quality is there in the product as well.

Good buy for now, problem solved for my carrier weathermaker 8000

I picked this up to replace the blower motor in my Trane furnace. This was not a direct replacement for the original unit, but considering it was less than half the price, I decided to give it a chance. There were some differences in the motor housing between the two units that required me to get a little creative when attaching the original mounting bracket that came with the furnace. Once i got that sorted out, it was pretty much smooth sailing until it came time to connect the motor to the control board. the white wire had a smaller spade terminal connector than all of the other wires and it was too small to slide onto the control board connector. I had to crimp on a new terminal, which i fortunately had on hand. Other than that minor inconvenience, it when back in and fired up and i can move air through my house again. Not counting the time it took for removal of the old blower assembly, the process of installing this one took me about an hour, which i'm ok with considering i've never really done anything like this before. It is been working now for a few days and so far so good. Only time will tell how well it holds up in the long run, but if anything happens, i'll update my review.

It is working good in my furnace and keeping me warm this winter. Fast shipping helped with a speedy repair.

If only I received the correct item I’m sure I’d be happy with it! The seller ended up swapping mailing labels with another package that was meant for another order for someone nearby my residence. I knew that because the packing list was addressed to the other person but the UPS label was addressed to me. Unfortunately I couldn’t go without central AC for another day so I had to resort to my local Suppy House where I paid $50 more for a universal 3 speed fan that also had bar wires instead of the connectors already attached like this one. Also the universal one had different wire coding (for instance the yellow wire was common) I’m sure this work great for others’ Carrier furnace fan failures. Mine was a 2 stage Weathermaker 8000.