Cooler Master MasterBox Q300L Computer Case 'Magnetic Patterned Dust Filters, mini tower, Alloy Steel, Modular I/O Panel, Window Side Panel' MCB-Q300L-KANN-S00, Black

Having had a larger PC case for a while I thought it was time to move to a smaller option. I liked the look of the BitFenix cases but at around the £50 mark, the CoolerMaster Q300L was just what I was looking for price and design-wise. Being able to choose where the USB and power buttons are placed is a cool idea but if you want to use it at the top (like in my setup - Pic above) you will need a USB extension to run the cable down the back of the case. There's plenty of room for cable management and the build quality is good. I have a full sized HDD at the back and there's also space for two SSD's. Having all the holes means that you don't get much airflow pressure but I haven't had any heat issues with my overclocked AMD 1700X. If you're looking at having your PC on the floor, I woudn't choose this case as it'll most likely be full of dust in a few months. For desktop, I've had it running 4 months with minimal dust although you can see a slight dust ring around the front intake fan. When setting up be careful with any fluff and this will easily get stuck into magnet dust filter mesh. If you do decide to buy the CoolerMaster Q300L, you'll also need to invest in some fans as it only comes with one medium-volume fan. LED fans looks great and I've added three plus used the included fan as a front-intake. Pros ✔ Cool Design ✔ Build Quality + Cable Management ✔ Removable Magnet Dust Filters ✔ Compact Size Cons - Only One Fan Included - Perspex Window Tint Is Very Dark - USB Cables a little short I also upgraded the CPU fan to a Arctic Freezer 7 Pro and there's plenty of horizontal room left. If you're going for a big CPU cooler, you might have to watch out with the clearance. Cheers, Jim!

Great case , plenty of room for hidden cabling. came with a fan installed which I moved to the roof as an additional out with additional fans fitted to the front to provide a positive airflow, plenty of space to do so.. Has magnetic dust covers on the front and top. And a plastic side panel to show of your led,s. Fits my B450M board and RX 580 card comfortably with the SSD hidden away. A nice compact budget case that I think looks more expensive than it was.

In terms of features this case was very competitive at this price point, overall I'm impressed with the build quality and features. There aren't many good matx cases at this moment in time and the ones that do exist seem to be budget or really expensive. Pros - Nice aesthetic on dust filter. Loads of room for cable management (Even with non-modular psu's) Can position the front Io wherever you want. Very compact but plenty of building space. Good build quality. Fairly cheap. Fits very large graphics cards. Cons - Slightly scratched on inside acrylic panel. Difficult to get acrylic panel off. Could be more mounting points for ssd's/slim hdd's. Overall an excellent case for the price, looks very modern and a pleasure to build in.

This case is really good. I use PC part picker and I highly recommend it for beginners but this case is very cheap if you can't afford a very expensive case and I had no issues I'm using it my pre-build as a home server to store all my stuff and so far it's been fine with temperature. What's good about this case? It's very small and compact and easy and it's not that heavy and the filters are easy to change.

Bought this thing for less than £40 so for the price i can't really complain about anything. It looks great imo Nice looking and adjustable front I/O space for 140mm fans I found it easy to build in plenty of space for cable management rubber feet on the backside so can be placed sideways easily decent included fan fairly lightweight for a case only bad point is that the 3.5" slot for your HDD is in an area of no airflow behind the motherboard so it can overheat but that hasn't affected me.

very nice looking case, great airflow and cheap but as soon as I was able to get my pc powered there were electrical crackles coming from the psu so I changed the power cord thinking it would fix it but it still made that noise and Evan sparked if the plug was moved to much. I ordered a new psu and the same issues the case doesn’t have enough clearance for the power supply cable and is touching the metal causing the noises and sparks, not sure if it’s just my case but good case other wise

I built a mid-entry level gaming PC using it. Very good natural ventilation due to fully grid like holes on top and front with decorative magnetic filters. Not sure about space for a water cooling radiator but I didn't try it. It can accommodate 2x 2.5" and 1x3.5" drives. Has one 120mm case fan with enough space to add up to 4 extra fans (RGB of course). Happy about my build, recommended when you want a case for your RGB gaming rig.

So this q300l case was released by cooler master in 2018 This Case was q500l 2019-2020 predecessor This case has holes in top, front and bottom I had 5 fan laptop cooler on which this Case is sitting right now, my laptop had fan issues so now it's used for PC case cooling I have attached 2 arctic fans 140mm 1600rpm and 120mm ,1200rpm in front for intake 2 coolermaster fans one for exhaust (xtraflow 1500rpm) backcand one for top ( 200-1000 rpm) 1 circle fan (1000-1200) rpm My PC temp with just one exhaust fan was around 45-55 during normal usage and CPU temp was around 64-74 degrees on normal to heavy load and gpu temps were 50 - 60 degrees CPU fan was spinning at 1500 rpm max After bumping up AMD wraith Cooler fan to max fan speed of 2600 rpm in bios settings, my CPU temps went down to 50 degrees. After installing all the fans, My case temps are 36-39 degrees My CPU temp is at 42 degrees normal and at 57 on load. If your buying this case get at least 2-4 fans You can 140mm fans or radiator in the front only On top only 120mm can be attached properly I could be wrong depends on brand and size of 140mm fan My arctic fan screw holes weren't able to match on top of the case. The magnetic dust filter on top and front can be cleaned easily. The side panel is acrylic, fingerprint magnet. 2 USB 3.0 jacks in front Mic and headphones Jack with HD audio but can only do 5.1 channel not 7.1. I had to attach my 7.1 channel headphone in the back Cable management very good Lot of spaces in the back. If you have radiator then your CPU temps will get better than mine . This case should cost around 3500 rupees But I had no choice but pay up 4500 rupees Cuz it I needed it urgently. This pandemic has really screwed PC enthusiast when it comes to pricing of PC components. 4/5 My PC specs AMD 1300X 3.8ghz (2018) Sapphire pulse RX580 8gb OC lite (2020) 😑 Ballistix red 16gb (2020)😑 Cooler master 550 mwe psu (2018) Acer vgo monitor 144hz LG monitor 75hz

1) Cable management that does not suck, that's a big advantage 2) Can be placed under the monitor on the desktop, rubber pieces on the long side 3) With 3 PWM-driven chassis coolers it is a silent beauty 4) Overclocked graphics card temperature is below 65°, that's very nice airflow 5) The side panel is acrylic, not glass, which is so so, but pretty fine for a budget setup 6) Buttons and USBs can be rebased at any side, but I just kept them as-is 7) Very careful and lovely use manual, showing all necessary addons for different setups 8) Loved the included rubber pieces for easy placing of the SSDs Would definitely recommend it!

Goede kast met aardig wat mogelijkheden! Had zelf een kast nodig die niet te veel ruimte innam en niet al te duur was. Ik ben positief verrast.

O gabinete é ótimo e super bonito, o que mais me chamou atenção dele foi o design super compacto e a versatilidade de usar, mas apenas de ser bonito, ele tem os seus defeitos. O acrílico é super fácil de arranhar, enquanto eu estava mudando as peças do meu antigo gabinete para esse, eu deixei o acrílico encima da minha cama com todo o cuidado do mundo, porém, quando eu fui fechar o gabinete com o acrílico, eu vi um pequeno arranhão no canto inferior direito, de início eu não dei muita importância, mas com o reflexo da lâmpada do meu quarto eu achei vários e vários pequenos arranhões que só podem ser vistos na luz, eu simplesmente não entendi o que causou aquilo, já que eu tive o máximo de cuidado possível, mas para quem vai comprar esse gabinete, cuidem do acrílico! E de resto ele me agradou muito, acho incrível como a Cooler Master consegue fazer excelentes gabinetes com preços incríveis. Apesar de ser um gabinete M-ATX, tem como você colocar até 6 fans de 120mm nele que eu achei super top e bacana. Recomendo d+.

Ottimo case, non pensavo che spendendo poco più di 60 euro potessi avere un gioiellino simile, le dimensioni sono ridotte ma l'airflow è eccellente a patto di acquistare qualche ventola aggiuntiva in quanto abbiamo solo una 120 sul posteriore che fa comunque egregiamente il suo dovere. Supporta schede madri mini-itx e micro-atx (il mio caso) e dentro ci sta tutto. Come si vede dalla foto ho installato una GPU bella grossa, una asus dual 6700xt lunga 30 cm e un dissipatore bello generoso, un cooler master 212 alto 16 cm (ci va a pelo quindi controllate bene l'altezza del vostro dissi prima dell'acquisto).Il cable management è abbastanza agevole soprattutto in relazione alle dimensioni ridotte. Per quanto riguarda la PSU ci va un normalissimo ATX mentre per i dischi entrano tranquillamente due ssd da 2.5" e un HD da 3.5" ma il suo posizionamento sul fianco destro del case non mi convince appieno per motivi di mancanza di areazione. Due filtri a calamita con una bella trama a nido d'ape sono posti sul front e sul top mentre un terzo e posto alla base. L'unica pecca a mio avvisono è la "placchetta" dei pulsanti di accensione/reset e delle prese usb che sembra essere un pò fragilino ma posizionabile su tutti e 4 i lati del pannello.Il pannello laterale è in plastica, fosse stato in vetro temperato sarebbe stato veramente il top anche se a questo prezzo forse sarebbe stato pretendere troppo. Se cercate un case bello esteticamente esteticamente e curato nei dettagli non posso che consigliarlo.