JJC JSC-2 - Flash Sync Shoe and PC Socket

OK, the build quality might not be the best, but it is extremely cheap. What I discovered is that this works on 3 different camera brands and as my strobe came with a cable, I can now trigger it with any camera from one item. The shoe on the top allows a wireless release to be stacked on top, with a cable to the side of the camera... which works with all cameras... I am very happy with this product!

So my set up is Yongnuo RF603 C3 transmitters and the Yongnuo Y560ii or Y560 iii. I wanted to use a flash wirelessly with my Yashica Mat 124G so I ordered a PC Sync Male to Male cable and a Pixel Hot Shoe Converter. The Pixel had 4/5 star rating but did not work for my set up. I brought this today and it worked immediately. I think this would work for pretty much any camera that does not have a PC sync cable. You won't be able to use any other modes between your flash and your camera apart from triggering the flash. My set up is all manual so triggering the flash is all I need, however if you are using digital cameras and want to use ttl/ettl; you will have to look for something else.

had a few problems with thew socket becoming detached though when it worked it worked perfectly though ultimately had to send back i reccomend the version with the locking screw which seemed to have less issues

Fully met my needs. PC sync with no hot shoe flash connection.

Works pefect

Didn’t work on my canon R50

I understand WHY some cameras don't need a PC Sync, so this is necessary for working with older flashes, or adapting gear that shouldn't be compatible with each other, to be compatible

Cheap, but do the job, I carry spares of these as they break very easily, usually the camera connection cable weakens the adapter where it connects and it eventually fails, other than that they work fine