IMPRESA Undercounter Dishwasher Bracket Replacement - Easy Installation & Mounting Bracket - Durable Galvanized Steel & Dishwasher Anchor Clips - Pack of 2, 3 in x 1 in

Worked perfectly. Great quality sturdy replacement for damaged oem kitchenaid dishwasher brackets. Easy to install.

Worked perfect for me. Got a dishwasher from a friend since he got a different one. Took about 2 minutes to install. Nice product

I bought my dishwasher on markdown from Lowes, it was a scratched return. Originally, it was around $4,000, but I bought it for close to $500. It didn't have any hardware, (not a big thing), but I didn't even know that there was such a thing as mounting brackets, until I watched a video on how to clean the filter. Long story short, I bought these, and they are a little thinner that I would expect, but strong enough to hold up a full dishwasher. They "could" be a little thicker, even if you had to bend them to shape them in order to properly secure and install them, they seem (to me) on the (slightly) thin side. They do work, and they are a long way from having nothing at all (Like I did). I just hope that they continue to last for years to come, (which they seem very much like they WILL).

Good afternoon arts.

Not quite as universal as I would have liked but it got the job done. Manufacturer's videos showcase the ease of installation etc. They don't show you having to use metal snips to remove half of the base part of the bracket which renders it about half as sturdy. Time will tell...

fits my old dishwasher and keeps it going

I used these brackets to secure an older (Frigidaire) dishwasher to my kitchen cabinets after installing granite countertops. The Frigidaire dishwasher was an older model and as such was not fitted or designed in any way to be used with side mounting brackets. The dishwasher had brackets but they were welded to the top of an aluminum band which was on the exterior of the dishwasher and which held the plastic dishwasher body to the metal dishwasher door frame. But I couldn't use these brackets since you cannot screw into granite without possibly damaging it. However, even though there was the aluminum band which went around the dishwasher exterior, there was absolutely no where to "hook" a bracket (you also could not screw into the aluminum band because you might puncture the plastic dishwasher body which would cause leaks and trash your dishwasher). So I purchased these brackets and J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz. I mixed the epoxy and put a healthy amount on that aluminum band which I described above. I then stuck these brackets in that epoxy and used blue painter's tape to hold the brackets in place. I let the epoxy fully cure (15-24 hours) and then I tested. SOLID HOLD. Just like a a steel weld. I pushed the dishwasher back in the cabinet and used 1/2 inch wood screws to secure to base cabinet frame. The other side was next to a sheetrocked wall so I used 4 inch screws and found a stud close-by and screwed the bracket directly into a stud. Mounting now is solid as a rock. Dishwasher does not move at all. Hope this helps. Good luck!

Works like a charm

Just as shown

lo que se necesita para una lavavajillas Maytag

Le faltaron tornillos para sujetar a la lavadora

Yes they were compatible and they fit