Next Level Racing Flight Seat Pro

It is like it says on the box, build your way. This product is so versatile for racing and flight simulation. OUTSTANDING product

The Good. The frame is very sturdy. The online instructions are good. The included instructions cover everything to do with not only the seat, but the whole cockpit and accessories as well. There are more than enough nuts, bolts and washers. The packaging was sturdy and the delivery was quick, two days early. The delivery men were very helpful and polite. It was easy to assemble. The casters are great quality, The Bad. It is very wide and very heavy. It has sharp edges on some of the seat brackets (I cut myself quite badly on the seat back adjustment brackets). The seat slider adjustment handle is a bad design and sticks into the left leg when resting on the foot plate. The packaging for the nuts, bolts etc is a terrible design and although it gives all the information needed when opened as it should be everything falls out, I thought I would be clever and open the accessories package from the back but it is hard thick and brittle plastic packaging that is very sharp when cut. This caused my first cut of the day, this one to my finger. When assembling the seat back to the seat base two brackets need moving, I found these impossible to move without the help of a lever and my wife, the brackets as mentioned are very sharp, second cut of the day. The Ugly. The seat is very hard. If you want to fit an Honeycomb throttle quadrant to the seat as I did, you will be very disappointed it won't, the "T" bracket gets in the way, the throttle quadrant ends up way to far back. Not designed well for this popular accessory. It's very expensive. The seat is poorly made, in fact the seat and most expensive part of the rig is possibly the worst thing about this product. It's uncomfortable, and poorly made. I bought this so I could add a seat mover In the future, from Nextlevel Racing, but if that product is as bad as this one, I don't think I want to risk that much money. My flight desk is just how I want it, so I didn't need a full rig. That's why I went for this one I have made a huge mistake, and an expensive one, I wouldn't buy this again and would send it back if it wasn't too much trouble, and hadn't destroyed the packaging. My advise is stay away from this very badly designed product, go for the cheaper full cockpit Boeing version.

Wie beschrieben! Alles super!

Bonjour, Les plus : _ Le siège est bien conçu, _ Acier de qualité supérieure, _ Très bonne finition et peinture de qualité, _ Fourniture de visserie généreuse, _ L’ensemble est robuste avec des possibilités de configurations et de réglages multiples, _ L’ensemble final inspire confiance. Les moins (remarques pour le fabricant) : _ Montage fastidieux à cause des tolérances de fabrication, _ Tolérances de position des inserts du cadre transversal en H trop larges, obligé de faire un trou oblong à la lime sur l’avant gauche et de retarauder M8 l’arrière gauche (voir photos), _ Vis M8 x 55 de fixations arrières du cadre en H trop courtes, remplacées par des M8 x 60 (heureusement présentes) pour fixer le harnais, _ Une seule encoche de verrouillage du siège en position médiane sur les glissières, qu’en est-il des positions intermédiaires ? Article cher, mais le prix serait justifié s'il n'y avait pas ces imperfections. Cordialement, Bernard GRÜN

Manques plusieurs insert on a du s'en passer pour le montage heureusement que pour des pièces "deco". Autrement très bon produit bonne qualité. A voir dans le temps.

I spent the better part of 3 days building this and setting up all the peripherals to get it in the best shape possible. It comfortably holds 2 throttles, joystick and F18 MIP all at once...plus I have enough room to store a collective on the side. Cant use it with the throttle in place on the left thigh, but easily taken care of. I wish that could have been thought out a little better when they designed this since helicopter simming is becoming fairly large now. Pro's: Its very comfortable. It sits better than any gaming chair Ive ever used, and Im fairly certain I can game in this thing for a while without getting butt hurt. Took a while to assemble, and man...building this thing was fun in its own right. Con's: After all is said and done, its smaller than I thought it would be. 1) I have the seat scooched back all the way, and my rudder pedals are about as far back as they can go. I barely have enough room to fit in to keep my joystick from striking my MIPs. 2) You can only fit a joystick in 2 places if you have a MIP installed: on the right side or on the center pedestal with the articulating link. Do not have any room whatsoever for an extension. None. Zero. Put an extension on the Flight Stand Pro and it will sit directly under the MIP. If you use the extension on the Flight Seat Pro, it will strike the MIP if you push the stick forward. With the MIP installed, you have only 4" of forward travel at best. 3) The Flight Deck has only one fitting to allow clamping the MIP. The piece that you install for that is only wide enough to fit either 2 MCDs side by side, or the HUD/UFC/AMPCD at once. You have to get creative and go to Home Depot to find spacers to get them to fit. Obviously this was designed prior to the MIP being released and in widespread use, but the fact they attempted to make it work fell flat on its face. Im sorry, but the included spacer should have been another 8" in width to accommodate the whole assembly. 4) Had to fabricate a place for a collective to mount. Not a ding on the setup as a whole, but wish that could have been a choice. Didnt have to alter any details to the pit at all to get it to work, just another hassle to deal with. 5). And last but not least, there doesnt seem to be any support for Slaw brand rudder pedals to be installed. You will have to figure out a way to get them to fit if you happen to have a set, or just get yourself a HSS drill bit and start drilling some holes. Not a big problem, but not a good problem to have either. Those Slaws are expensive, arent they? Im not really interested in putting a drill bit to a few pieces of expensive hardware just to mount together. I havent really flown in the new seat yet, so I cant quite comment on how truly comfortable it is and Im sure Ill come across more gripes in the future as well, but all in all Im really liking this setup. Really would be perfect if the above mentioned gripes would be dealt with and it will truly be an awesome setup. The limited time I spent in it already makes me wish I had some more free time to play now. Cant wait!