MOES Wireless Smart Scene Switch Button, Require MOES HUB, Zigbee Connection Tuya Battery Powered Included 12 Scene Controller Light Switch for Smart Home Automation 4 Gang White

I'm using Home Assistant and a Conbee II Zigbee USB stick; had absolutely no issues with connecting to HA. HA sees the button presses just fine, perhaps slightly quicker than a ZRC-90 Z-Wave switch I have, but nothing dramatic. I do wish there were an easy way for the button presses to show up as states in HA so I could use them in Node-RED, but building automations works perfectly well. This is purely esthetic, but I didn't like the lights being at the bottom of the buttons. When they're at the bottom, your finger covers them up when you press a button. Ultimately, I've just mounted my switches upside down on the wall and rearranged my automations so that button 1 is actually "button 4". Speaking of mounting, I'm not much on drilling holes if I can avoid it; I found that a couple of large Command strips on either side of the mounting plate work fine, though the tabs for the strips will show a bit at the bottom. Medium size strips will probably hold it just fine, though the dimensions may cause it to wobble a bit on the wall when you press a button. The best piece of advice I have is this: once you're sure you're going to keep this switch, use a screwdriver to pry out the locking tab that secures the switch to the mounting plate. As far as I can tell, the locking tab serves absolutely no purpose aside from being annoying. When you slide the switch onto the plate on the wall, it stays in place perfectly fine without that tab. And as you'll know five seconds after opening the package, that locking tab is just an absolute pain in the rear to deal with. Just break it out with a screwdriver and you'll save yourself a lot of headache when you need to slide it off the wall. All in all, this is a nice, responsive switch that I'd highly recommend.

I got this product as a replacement for the Flic buttons, which have been way too flaky (even with their hub) for my liking. Since I already had a pretty significant Zigbeen network set up in our home, I thought that this set of buttons should work much better, and initially at least, I have been proven right. The product was a breeze to set up. It comes with two strips that you can use to attach this to anywhere you might like; my placement was on a remote control holder (where my two Flic buttons had been attached previously) in our basement TV room. The main use case for me is to control the lights and turn on various scenes (coupled with the input source on the TV/receiver, such as for karaoke night), and for that, the buttons work fantastic. My smart home is run through Home Assistant, and my Zigbee network is set up via Zigbee2MQTT. The product was found and set up automatically via Z2M, with it showing up in Home Assistant soon after. Amazon doesn't let me include external links in reviews, so I can't directly link it; however, if you search for "Home Assistant TS0044 blueprint", you will be able to find an automation blueprint that has been set up for this product; I used that to set up all the actions that I needed for the 12 possible button press combinations that this product supports. Overall, I would recommend this product!

Connects easily to Home Assistant via the Nabu Casa SkyConnect ZigBee dongle. Range is pretty decent. Battery life is amazing. Durable, portable, easy to mount anywhere. Print some labels to stick on the buttons, and they'll stay where you put them. No complaints, and very easy to configure and use. I have bought several of these and they're all over my house.

There is no need for the separate hub that goes with this panel so long as you have a smart home hub with Zigbee (which should be all of them). Got this to add to my Hubitat system as it was the only black finish Zigbee controller I could find (that Philips Hue wheel switch is nonsense). Paired immediately with the hub with zero issues and the Hubitat had the proper Tuya driver available natively. This unit works just fine with the built-in Button Controller app on Hubitat, although it does not support the button "held" function. It has pushed, double-tapped, and released as the three options for each button. Can't speak to battery life yet as I just purchased the unit. The black finish does seem prone to picking up fingerprints. The unit also had a bit of a lightweight/flimsy feeling when I was holding it separately and configuring things, but it looks and feels perfectly solid when mounted to the wall as you can see in my photo. All in all, very satisfied!

Works very well, great value for the price with how many buttons it has. Only criticism is that the long press time is a bit too long.

A great switch. 12 possible functions from 4 buttons. Works flawlessly with my Home Assistant and Nortek USB radio.

Solo se puede conectar con el hub de la misma marca y todos los dispositivos que se quieran controlar deben estar en el mismo hub que es muy inestable. No es compatible con ningún otro hub.