TripleAliners Vehicle Mat Universal Fit Trunk Cargo Liner All Weather Protection XPE Material Seat Back Protector Trim-to-Fit Compatible with Most Cars SUV Sedan(Backrest Mat) NO for Suede Surface

Could not find this type of 2nd row seat protection that was custom fit for an older vehicle, so we ordered this one even though Amazon says it does not fit the vehicle. Despite Amazon's warning, it works perfectly for a 2004 Ford Explorer with carpeted seat backs/cargo area and an odd 3-section folding 2nd row of seats (not a 60-40 split bench, very close to a 33-33-33 split). Had enough large velcro dots to secure all three sections adequately. Adhesion was very good. Velcro dots are designed to work with the common carpet style seat backs. I think carpeting in cars is a terrible choice, particularly for SUVs, but it seems to be the default. Clearly the velcro is not designed for and will not work if you have leather or utility twill material seat backs, it needs to stick to something fuzzy like carpet because that's how velcro works. We found you get a cleaner cut using scissors, but the little utility knife they send is a bit easier if you want to line it up on the seat and sort of trace cut. You won't get a custom laser-cut look or exact 100% coverage, but it offers good, functional protection for my son's adventure rig that is going to see a lot of dust, dirt, mud, snow, and gear being tossed in with little regard for the vehicle. Took us about 30 minutes to cut and install all 3 pieces, we went for a B+ effort level and didn't try to create a pattern and get an absolutely perfect fit (law of diminishing returns). I like the quality of the product, easy wipe clean material. Adhesion has held up fine even with the vehicle sitting outside in intense western sun. Shipping/packaging was excellent. Product arrived quickly in perfect shape. Good value.

In search of a solution for my 2013 Pathfinder's seldom-used third row, I was on the lookout for a foldable mat that could seamlessly cover both the trunk and the back of the third row seats. The quest was driven by a desire to minimize the constant vacuuming required to tackle the inevitable dust and dirt. My search led me to the TripleAliners Universal Fit Trunk Cargo Liner, a product that stood out for its thoughtful design. The inclusion of a Velcro sticker pad is a stroke of genius, ensuring the mat stays in place on the back of the seats while also allowing for quick and easy removal. The ability to customize the fit by trimming the mat is a welcome feature, offering a tailored look for my vehicle. The true value of this mat lies in its functionality; it provides comprehensive coverage to keep the back area pristine, free from dirt and dust. Moreover, its design doesn't interfere with the operation of the seats, whether they're up or down. This level of convenience and cleanliness is exactly what I needed.

I debated on using these for the seat backs where my kids step on the seats to get to the third row, or going with a lot cheaper floor mat that would also fit and buying velcro separately to adhere to the floor mats. I went with this product, as I figured it was meant for the seat backs. I couldn't ask for anything better for the material itself. It is sturdy enough that it should last a long time, rigid enough that it won't flop down when the seats are upright nor move around when stepped on, and grippy enough that you won't slip when stepping on it. I would recommend this product for anyone looking for a similar use case. However, despite the listing saying it fits the 2021 Yukon XL, there is NOT enough material to fit the backs of the seats. You can fully cover one seat back, but not all three. It comes with a large piece for one seat, but two smaller pieces stuck together that don't fully cover the other two seats, as it leaves a few inches on either side. If they came with three of the larger sections of material it would make it cover all three. Update 7/21/23: The company that sells this really stands behind their product and made it right. If you are on the fence, rest assured that if there is an issue, they are there to help and will work with you on a reasonable resolution.

I’m not sure how this is supposed to work on the CX-30. When the seat folds from flat to up, the seat back tucks in about 3 inches where it hinges. In the photo the horizontal lines at the bottom of the backing need to tuck into the hinged area when the seats are up. The hinge gap is very small though and this rubber seat backing is about a quarter inch thick so even if I get in the trunk and tuck it in as best I can, the photo shows it’s just buckling away from the seat. If I don’t tuck it in by hand when pulling the seat up, it catches and pulls off the seat. To avoid that issue I’d have to have at least a 3-4 inch gap between the cargo liner and this seat back cover. I’m not sure how this is supposed to work. Maybe other cars don’t hinge the seats like Mazda, in which case this would have been great?

I purchased this product just to protect the back of the seats in mt 2023 Escalade. It is a little small for the longer split seat and does leave a little of the seat back uncovered. The other was larger than the smaller back seat and needed to be cut around it. It was easy to cut and install. Time will tell if the Velcro ends up holding. I purchased this because I didn't want to spend the money on the ones from Cadillac for these seat backs. It will work for what I need it to, but if you are looking for it to completely cover the seat back, it won't make it.

Perfect for 2020 Sequoia! The back of the second row was a magnet for dog hair and looked terrible because of frequent vacuuming. Easy to cut and the velcro sticks like glue to the Sequoia material. I had to get creative but there was more than enough material to do the backs and keep the flap functional.

I am not handy at all, but I was able to get a great fit for my Honda HRV. The only things were that I was short on Velcro stickers because some had adhered to the bag in the packaging, and also I need to get an additional small mat to cover the carpet strip at the bottom. Would love if the company could reach out to me about getting one suitable. Hilghly recommend this product.

We have come back to edit ore review 1 month after installation. The adhesive on the Velcro discs are not strong enough to keep the protector attached. The little wipe they give you to help the disks adhere, apparently doesn’t help much. We are trying to come up a solution, but at this point the protector is pretty much useless. Will not purchase again. The instructions are lacking, but if you have common sense, ,you can figure it out. We don’t recommend using the included knife, especially if you are left handed. They were easy to cut to size and attach. They look good, just not helpful since the pieces do not stay adhered to the velcro