ArmorSuit [2 Pack] MilitaryShield Screen Protector Designed for Samsung Galaxy S22 (6.1") Case Friendly (2022 Release) Anti-Bubble HD Clear Film - Made in USA

Imo there is no better screen protector, I buy this with every phone upgrade. It's ready to install and is durable. I never have any issue with the fingerprint sensor or touch screen, it works every time. I don't want to jinx myself but I drop my phone all the time and I've never had a screen crack or break (I do use a phone case obvs) and I think this works far better than a tempered glass protector. Since the screen protector is soft it will get scratches, but your actual screen will be flawless underneath. Best buy.

Applied this to both my wife's and my S22 phones and it couldn't have been easier. Just spray the film and apply to the phone. Make sure you're doing it in a well lit and dust free place. If you make a mistake in aligning the protector, you can just slide it if it's still wet or just take it off and reapply...pretty fool proof. What you get is a mall kiosk quality professionally installed protector with no bubbles and is case friendly where the edges don't get pushed up. The screen itself is very smooth to the touch and feels pretty much the same as the glass. It's not sticky or has any texture like some high end protectors I've used before. I highly recommend this over those plain dry peel and stick protectors.

I had an ArmorSuit screen protector on my last phone (Galaxy S8) that lasted for nearly five years, so I chose another ArmorSuit screen protector when I bought my new Samsung Galaxy S22. Here is a detailed review after four months of use. You get two screen protectors in the box. It is a case friendly screen protector and I am using it with Spigen Tough Armor case and everything is fine. It does not go all the way to the end of the screen on the sides, but does go almost to the edge on the top and bottom, which made it quite difficult to put the case on without damaging it. I hope ArmorSuit takes this into account in the future. The screen protector is super clear and from my past experience, with proper care, it will stay clear for many years to come. I did not notice any issues with the touch screen functionality. I did not need to activate the enhanced touch sensitivity option in the S22. I registered my fingerprints after I put the screen protector on and I have not noticed any issues with fingerprint operation either, though I mostly use face unlock to unlock my phone. This is a wet application screen protector that means you need to spray the screen protector in order to activate the adhesive and apply it to your phone. This application process makes it easier to apply the screen protector, because while it is still wet, you can move it around and reposition it. After the application, it needs 24-48 hours to completely dry, so it is best applied on a new phone or during a time when you would not need to use your phone for at least 24 hours. The process can be sped up using a hair dryer, but I did not use one. The company claims that the screen protector will not have any air bubbles after it dries up fully. The claim is true only for normal air bubbles, not the bubbles caused by dust particles. If you apply this is a dusty environment, you will get dust bubbles that will never go away. The best place to apply this screen protector is in a clean room with no fan or air vent, that has a humidifier running for 6-8 hours to neutralize the dust particles. I actually applied it in my bathroom with the exhaust fan off and I let the steam built up from a hot shower to get rid of any dust particles in the air. My screen protector therefore does not have any bubbles. The screen protector however does have lots of dings and material imperfections in it that are visible when the screen is off and you position it at an angle with the light. I believe these are a byproduct of the manufacturing process. I had them on my last screen protector for my S8, the company was nice enough to send me a replacement, but the replacement also had them, though not that many as the original. You cannot see them when the screen is on, so I can live with them. The screen protector is soft, if you press down with your fingernail, it will leave a ding, that will go away in a few hours. However, if the ding is applied with a force, it will not go away and will permanently stay there, so be careful about that. I unfortunately have a ding at the bottom edge that happened when a corner of my vest with zipper got caught between the phone and the belt holster. The screen protector is not broken or pierced, just dinged at that location. One negative thing I have to say about this screen protector is that it is a fingerprint magnet. Your fingers and sweat from your cheek will leave smudges on the screen that are very difficult to wipe off. Most other screen protectors come with some type of coating to minimize this but apparently this ArmorSuit does not. It is probably due to the soft material used in its construction. This issue along with the material imperfections are my main concerns with this screen protector, therefore I did not give it five stars, but it is a good screen protector and taking into account the cost to benefits, I would recommend it to anyone who needs a screen protector to protect their new Samsung Galaxy S22.

I bought this screen protector for my new Samsung Galaxy s22. Overall, I'm happy with it. Installation was not difficult and the film absorbs all the little everyday dings that life throws at it. It is a bit of a fingerprint collector which is annoying. Edges do not interfere with a phone case. I had an issue with a scanner not being able to read a bar code on my phone and I suspected that the screen protector was to blame. I have the version with a glossy finish and it comes in a matte version as well. I reached out to customer service and told them about what happened with the bar code scanner and asked if I could buy the matte finish protector. They responded by sending me a set of the matte finish protectors at no extra charge!! I was very pleased with the wonderful customer service. It's a good product that does the job.

Works well, stands up to alot of abuse, lol. Installation was pretty easy

I have been using this product since 2015. Our entire family has them and we love them. They really do last for the life of the phone. I keep my phone in my handbag and have only a soft plastic case on it. I keep my phones for a minimum of 2 years and have never had to replace my screen protector. My husband keeps his phone in his pocket with keys and other elements, he also gets a full 2 years of protection. Easy to install. Unlike the dry stick on protectors this does not have that annoying electric charge that draws every piece of lint out of the air to stick to it. It is very forgiving if you do need to lift and reposition while installing. You absolutely cannot tell it is there. Once it sets up it becomes completely transparent and is super thin. For the first 2-3 days you may be able to tell a bit of texture difference but that goes away once it is firmly set. I would be lost if this product were to go away. I have tried tempered glass and other options and nothing holds up or is as easy to install.

I wouldnt even give this a 1 star! Ended up throwing them both away after trying to put them on my phone. First one was crap and tried to put the second one on. Bubbles and finger prints show. DO NOT WASTE YOUR MONEY!

I just bought this for my new S22. It was easy to apply and looked great. Unfortunately, I was unable to use my fingerprint reader, even after I edited the settings to accommodate the screen protector. I removed it and the reader works fine. My recommendation is that this is a nice screen protector...unless you want to use the fingerprint reader on your S22. Then I would avoid.