Samson S-Patch Plus 48-Point Audio Patch Bay with 1/4-Inch Phone Connections

This is my first patchbay and I'm quite pleased with it. For years I've been crawling around behind the racks in my small studio wiring and re-wiring gear every time I want to reconfigure my signal chains. But no longer will I be covered in dust bunnies and spiders, thanks to the S-patch Plus. This thing really is a game changer, especially for those of us less experienced with what can be a rather confusing "simple" tool- it's well built and packs a lot of common-sense functionality into a small space. The best part about the S-patch is the freedom it gives you to choose Normalled, Half-normalled or Thru functions with the flip of a switch on each input-output pair. This is really convenient, especially if, like me, you're new to patchbays and want to experiment with functionality and signal chain options. The switches are sturdy, as are the jacks and the metal casing of the unit itself- no cheap plastic or thin faceplates here. I've noticed no loss or degradation of signal when tracking or mixing with the unit and I've found the signal flow diagrams printed on the top of the casing to be very helpful as well. My only complaint is that the unit doesn't come with Rack Screws, which isn't a huge deal, but it would be nice. It does come with stick-on rubber feet in a little bag, which I'm not using because I have it racked but they would be nice if you had this sitting on a desk. Additionally, some folks have commented on how there isn't much room on the face of the unit for labeling each channel. This is true, but that's the price you pay for a single rack space size unit. I got around this by purchasing a 2 foot long, 1.5" wide, 1/8" thick strip of aluminum at the local hardward store for 3 bucks. I used a jigsaw to cut it to ~19" long like a standard rack unit blank. I drilled out holes in the ends for screws and mounted it just above the S-patch on my rack. Then I stole my wife's labelmaker and created stick-on labels for each piece of gear connected to the patchbay, and stuck them vertically to the aluminum strip. This plate can easily be removed to access the diagrams on the top of the S-patch when you get confused on what the heck-swoggle "half-normal" means. One word of caution, especially if you're new to this: while any TRS bay will pass phantom power from a preamp to a mic, you run the risk of "hotpatching" your mics if you plug in cables while the phantom power is engaged. This can really damage your preamps. If you're really careful, you can get around this by simply never patching a live mic, but this is always going to be a gamble, especially if you're like me and your brain is in 67 places at once during a session. So while it's tempting to put all your preamps "behind" the bay, it's better run the output of each pre to a channel of the patchbay which is then normalled to your interface / board. For example, in my studio if I want to plug a mic into an outboard preamp, I use the following chain: Mic --- xlr patchbay (much safer for phantom than trs) --- Preamp --- S-patch channel normalled to line input on my interface. This means that my mics always run directly to my interface via my outboard preamps UNLESS I break the normal via patch cable. Any phantom power thus flows to the mic from the preamp "ahead" of the S-patch. Remember, phantom power flows the opposite direction of mic signal! Overall, I'm very happy with the S-patch and I already can't imagine my control room without it. It's also already full, so I'll likely buy another soon.

The first thing that impressed me when I took it out of the box was how hefty it felt. It feels like a sturdy piece of gear. And while most of us probably don't ever need to change normal settings after installation, having the switches on the front is a very nice touch. The switches themselves feel reliable, set low enough to avoid accidental switching, and the force required to throw them feels satisfying. And regarding their everyday purpose, the patch cables go in and out very cleanly. The connection feels very solid indeed. My only quibble is the scribble strip area is relatively small. I was able to print labels, but the type size is necessarily small. A very fine product!

I had 2 Behringer patch bays but one was already losing good quality connection on only the rear ports which are the most important. I love that the Samson has the switches in the front versus the top. It makes switching normalled connections to half or thru so much easier. I used to have to need to unscrew the racks but this thing is very VERY solidly well built! What I also enjoy is the TRS rear inputs are extremely enforced. I can really tell that this patch bay was worth $50 more than the behringer. I still have a second behringer patch bay and hopefully it lasts but if it truly doesn’t, I’m ordering a second Samson!

Samson S-patch is simple, convenient TRS patch bay. it has 24 in/out which seems more than enough for my expanding hybrid studio. it allows manipulate different effects chains and different hw unit into my limited amount of interface input ports (preamp-bypassed). its easy to switch modes of N/HN/T from the front, and easy to chain hw and switch their order (i.e la2a before or after 1176? add eq after or before compressor, etc). sure with interface that has more inputs such manipulation can be done in its software mixer routing, still i find it less intuitive and slower than simple patch in hw that is infant of me. so far unit seems to work fine with no noise - mainly using it in normal mode. So why I deduct one star? because of the amateur quality control. the unit arrived with its front panel upside down. that means front panel numbers different from back panel, but more importantly the toggle mode switch has no room to move half-normal, just normal and thru. philips screw driver and a minute later the panel set back to it's correct position and issue solved, just annoying it came out of the factory like that. beside that I like its 1u format, so although there is less room to write on it the names of the units, its easy to save document with the inputs/outputs units.

Excellent piece of studio equipment! 1. Very sturdy & quality construction. It's heavy, in a good way. 2. Front switches for changing modes 3. Unbeatable quality vs price !!! 4. If the price suddenly changes to 650 euros, it will worth it 100%

I had been using one of those AP Audio patchbays for over a decade, and after a decade, half of the individual patches had stopped working. Plus, over the years, I had changed my configuration a few times to accommodate different setups, which meant physically flipping each patch depending on the normal/half-normal/thru setup I wanted. The S-Patch plus is like a luxury item by comparison. Solidly built, with a very handy switch on the front. The only downside is that the scribble strip is next to useless. I found a PDF of the manual online, printed out the faceplate on 11x17 paper, and stuck it above my patchbay, using that instead. I can't justify knocking a star off for that though. I'm trying to keep my setup minimal, but if it gets large enough, I'll pick another one of these up in a heartbeat.

Ottima Patch-bay, ne ho prese 2. L'uso che ne faccio è quello normale in uno studio per il cablaggio dinamico di outboard analogico. Grazie.

Muy funcional gracias

Considering the switches and the build quality, it’s the best I’ve experienced.

Solid build quality, rock solid.

Pretty solid design, sturdy, made of metal and just a quality product. Can't go wrong with this for your home studio... everyone should get one NOW.