Digital Angle Finder, Tadeto Digital Inclinometer Protractor Laser Level 3 in 1 Magnetic IP54 Waterproof Inclinometer Level with Large LCD Screen Type-C Fast Charging

Will keep it short:Very well made. Aluminium extrusion body. Front and back plastic parts are well made.The screen is big and easy to read. ( some feedback showed that the display has scratches: the screen has a protective film. You can hardly recognise it but there is. Peel it away and you have a nice looking window.)White backlight, very bright.Accuracy is good. 0.2degr. Compared with your normal level spirit it is way better and easier.Mm per meter or %.Laser left and laser right: very handy. (can be switched on off individually)Small in size.Build in battery: easy to charge with provided usd cable. Battery is 300mAh. Will last approx 2 hrs. Has auto shut off. (can be cancelled)Manual is okay.Nice box or pouch would have been icing on the cake.

used this instead of a spirit lever for over two years, the batteries last quite a long time, and charges nicely too, very useful to have this in one hand and pencil on the other when measuring things on the wall.

Good kit

So easy to use and it fits in your pocket. I am installing some driveway gates. The pavement outside my house is on a gradient and the drive raises up from the drive. In the past I would have used a spirit level which is common practice on the gate posts. But is not as accurate as this piece of kit. Because the gates are quite heavy steel and composite infill. The posts need to be as near vertical on 2 sides as possible, also the gates have to also rise when opening. The calculations to get the angles of the rise is a bit complicated, unless you are good at trigonometry. By using this piece of kit and finding the required angles. I then went into my kitchen, placed the inclinometer on the work surface and put several pieces of post it notes under one end until the required angle was shown. Turned on the laser and measured from the worktop to the laser. This gave me the measurement of the gate rise.I have every confidence that the end product will be as accurate as it can be. This should be a better method than trial and error.

Can be a little complex to use and get up at times but seems accurate

How on earth did I manage without a digital level? This is super, seems very accurate, has laser lines either side.Couple of things reduce its usability. The screen helpfully switches round if it's reorientated. But as one is normally aiming at a multiple of 90 degrees, it means it keeps jumping orientation.Also I haven't managed to make calibration work. It says before commencing calibration you need to put it on a surface so it reads zero. But it's so sensitive it's really hard to put it in such a surface without it wandering, even if only by a hundredth of a degree or so. I doubt it needs calibration and have checked it by flipping it round on a surface, it seems fine within tolerance of about 3 hundredths.

Bought this for setting up saws as well as a laser level.When using a a level and using the real time level and laser line the tool works as expected and levels aren't too far out.Using it with a tablesaw or any tool where you need 90degrees to a ref. Don't bother the scale jumps around and when it settles and you set it up and check it against a ref 90degree square I was shocked how far out it was.2 stars because it's easy to read and use. Lasers clear and visible.Just don't use it as your only referenceCan't recommend

First time use for putting new radiator on wall, finding plumb lines, good clear laser, easy to read dial and very accurate. USB chargeable wins out over replacing batteries