Entregar a Nicaragua

Para la mejor experiencia Obtener la aplicación

JBtek 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM

JBtek 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM

Q: How is this compatible with raspberry pi if it is 5v ttl? can i connect it to a raspberry pi and what voltage level activate it?

There's a driver circuit per relay on the board. The IN1 through IN4 inputs can be driven by a 5V or 3.3V logic signal, but the board needs to be configured properly. In my case the relay inputs were connected to the 3.3V GPIO outputs of an ESP8266 NodeMCU board. For 3.3V drive levels, do this: 1. Remove the jumper on the relay board between JD-VCC and VCC. 2. Connect VCC on the relay board (which powers the input circuits) to the 3V3 of the NodeMCU or Raspberry Pi GPIO Expansion connector. 3. Connect JD-VCC on the relay board (which powers the relay coils and driver circuits) to VIN of the NodeMCU or 5V of the Raspberry Pi GPIO Expansion connector. A logic low level on the relay board input activates the corresponding relay. A logic high level on the relay board input or floating input leaves the corresponding relay deactivated. Each relay consumes 68mA from JD-VCC (for the driver and relay coil combined) when one relay is in the activated state. So, when one relay is activated that's 68mA, or 4 * 68mA = 272mA from JD-VCC if all four relays are activated simultaneously.

Q: What is the third screw terminal for? i know one is gnd in and the other is gnd to accessory, but the control pins are on the other side.

Answers claiming that the leftmost terminal is common are wrong. The center terminal is common, leftmost (shown connected to the center terminal with silkscreen) is NC 'normally-closed', and the rightmost of each triplet is NO 'normally-open'

Q: Can the arduino/rpi drive this directly or are external drivers required?

RPI=Yes. The current flowing through inputs IN1 - IN4 comes from Vcc, a 5V supply and is limited by two diodes and a 1000ohm resistor so it will be about 3mA IF the picture here is the same as the board you receive. Board schematic: http://wiki.sunfounder.cc/index.php?title=4_Channel_5V_Relay_Module . More information you may need: According to the description here, the power supply will need to supply 50-60mA for each relay that is energized. No, you will need about 100mA per relay. The data sheet for the relay in the product picture http://www.datasheetspdf.com/datasheet/download.php?id=720556 says the relay coil requires 89.3mA. This is only the current that flows through the relay coil. Add to that the current the goes to the RPI and the current that drives the transistor that drives the relay coil and it adds up to about 100mA/relay. Hyetex

Q: Is diode stuff embed? do i need to hook it with external diode and pnp ect.?

External diode is embedded in the circuit

ID del producto: 293196940

Transacción segura

Detalles

Connector Type
Through Hole
Contact Material
Silver Copper
Contact Type
Form C Or Spdt
Current Rating
10 Amps
Mounting Type
PCB Mount

⚡High-current relay

💡LED status indicators

🔌AC/DC control

Comprados juntos con frecuencia

JBtek 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM

ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Ribbon Cables Kit Compatible with Arduino Projects

Gikfun 12V DC Dosing Pump Peristaltic Dosing Head with Connector For Arduino Aquarium Lab Analytic Diy AE1207

Descripción

🔧 Unleash the Power of Control!

SMART HOME READY - Elevate your home automation game.
ROBUST PERFORMANCE - Handles up to 10A for reliable operation.
USER FRIENDLY DESIGN - Indication LEDs for real-time feedback.
EMPOWER YOUR PROJECTS - Control high-power devices effortlessly.
VERSATILE COMPATIBILITY - Works seamlessly with Arduino, Raspberry Pi, and more.

The JBtek 4 Channel DC 5V Relay Module is a versatile interface board designed for controlling high-current appliances with ease. It supports a wide range of microcontrollers, making it ideal for smart home applications, industrial automation, and DIY projects. With its robust design and LED indicators, this relay module ensures reliable performance and user-friendly operation.

Presupuesto

Connector Type	Through Hole
Contact Material	Silver, Copper, Or Alloy
Contact Type	Form C Or Spdt
Current Rating	10 Amps
Mounting Type	PCB Mount
Brand	JBtek
Operation Mode	Automatic
Coil Voltage	5 Volts
Contact Current Rating	10 Amps
Maximum Switching Current	10 Amps
Minimum Switching Voltage	5 Volts
Specification Met	Ma
UPC	520361134553
Item model number	4450182
Item Weight	0.32 ounces
Product Dimensions	2.56 x 1.97 x 0.79 inches
Item Dimensions LxWxH	2.56 x 1.97 x 0.79 inches
Manufacturer	JBtek
ASIN	B00KTEN3TM
Is Discontinued By Manufacturer	No
Date First Available	June 6, 2014

¿Tienes una pregunta? Mira lo que otros preguntaron

How is this compatible with raspberry pi if it is 5v ttl? can i connect it to a raspberry pi and what voltage level activate it?

What is the third screw terminal for? i know one is gnd in and the other is gnd to accessory, but the control pins are on the other side.

Can the arduino/rpi drive this directly or are external drivers required?

Is diode stuff embed? do i need to hook it with external diode and pnp ect.?

Preguntas comunes

¿Son los productos genuinos y auténticos?+

Sí, todos los productos se obtienen directamente de minoristas autorizados en los Estados Unidos, Reino Unido, EAU e India. Mantenemos procesos de control de calidad estrictos y verificamos cada producto antes del envío. Todos los artículos vienen con garantías de fabricantes aplicables y están cubiertos por nuestra política de devolución estándar.

¿Cuánto tiempo lleva la entrega y es confiable?+

Los tiempos de entrega varían según el país de destino, que generalmente van desde 3 a 9 días hábiles. Cada pedido es totalmente rastreable a través de nuestro sistema. Manejamos todas las autorizaciones aduaneras y utilizamos socios de mensajería confiables para la entrega de última milla. Recibirá actualizaciones periódicas sobre el estado de su pedido por correo electrónico y nuestra aplicación.

¿Qué es DesertCart? ¿Es seguro ordenar?+

DesertCart es una plataforma internacional de comercio electrónico que funciona desde 2014. Procesamos de forma segura miles de pedidos a nivel mundial cada día. Cada producto pasa por nuestro proceso de verificación de calidad antes de la entrega, y proporcionamos un seguimiento de pedidos de extremo a extremo, atención al cliente 24/7 y una política integral de devoluciones para garantizar una experiencia de compra segura.

¿Cómo se calcula el precio del producto?+

Nuestros precios incluyen el costo del producto, el envío internacional, los aranceles de importación, la autorización aduanera y los cargos de entrega locales. Manejamos todas las aduanas e importantes, asegurando que no haya tarifas ocultas al entregar. Los miembros profesionales reciben beneficios adicionales, incluido el envío gratuito.

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

1. Suresh K.

Me impresionó mucho la calidad y la entrega rápida. Volveré a comprar aquí.

Hace 4 días

Fátima A.

El mejor envío internacional que he probado. ¡Vale cada centavo!

Hace 3 días

Ver todas las reseñas de confianza

Compre globalmente, ahorre con Desertcart

Valor por dinero

Precios competitivos en una amplia gama de productos.