Handheld Digital Mechanical Vibration Meter, 0.01~199.9mm/s, Mechanical Vibration Analyzer Tester Gauge, Acceleration, Velocity, Displacement Measurement for HVAC, Motors, Engines, Generator

Good product

This meter works well for taking measurements. It measures displacement, velocity, and acceleration and includes both a long and a short probe. The meter can also be used without a probe on flat surfaces. It has a nice solid feel. The display is excellent. It is bright and full color and shows data in graphs (charts) as well as tabular formats. The menu/buttons sometimes is a little awkward to use. For example, turning on or off the flashlight requires several button presses. Scrolling through the menus also can be confusing at times. My main wish is for a way to export data.

I initially got this to quantify vibration from a ceiling fan. I found the results to be inconsistent. So then I tested it set on the same spot on a speaker playing the same song at the same time. This confirmed the inconsistent results I got. Would be useful to have a lead separate from the meter base. As it is designed, holding it causes vibration. But even when I positioned it in place and let go there were inconsistent readings. I'd say it is useful but not very practical. My hope was to use it for adjusting motor mount when I restore old tools. Overall I'm disappointed at the lack of consistent read outs.

Was able to pinpoint a failing bearing on a large 75hp pump before it failed completely. Was able to show my client pictures of the readings. Color display definitely helps. Highly recommend.

I checked our motors with this one and then a company came in behind us to re-verify. They concurred with my findings. I like the green, orange and yellow lights.

rápida entrega

I was offered to do a free unbiased review of this product and since I had an application for it in mind I accepted. I use many electric motorized systems at work and at home, while this meter is not limited to electric motors and can also work with gas motors or for balancing fans, props or anything that may cause a vibration in a motorized system its just a great tool to have. I was particularly interested in how it worked with my Vortech MP-40 pumps and my Reeflo return pump, I have two MP-40s on the tank that have not been cleaned in 4 months. I decided to run some tests on one before cleaning and then see how well the meter could detect the changes in the pump after cleaning. To the human ear the pump sounded the same before and after cleaning but the meter could detect the changes. I have included some edited sample screenshots from the unit to show that it really does detect slight changes in a motors performance. I think this will be very handy for knowing when any electrical motor system needs cleaning and also to see when the motors performance may be dropping off and in need of maintenance such as bearing replacement or shaft / load re-balancing. The meter itself is very solid feeling and has a high quality feel to it. The display is Ok but not super high resolution. It does store the data during testing in a spread sheet type format but there is no way to export the data to a PC. I do like the fact that it uses two AAA batteries as this is one less device to keep charged. Also the case it comes with is a nice touch. Overall a very good meter to have if your into HVAC work or any hobby that uses motors.

I got this to check the vibration of, well, anything actually. Fans, pumps, I tend to work on a variety of equipment. The color screen offers a LOT of information, and you can view graphs of each measured parameter. Also comes with 2 probes, which is handy, sometimes you need to get a little deeper into someplace to get a reading. Comes in a nice case. Only real drawback is it runs on AA batteries instead of being rechargeable. Would much prefer if I could just plug this in. Oh well, I suppose. This is a very well made piece of equipment, I was pleasantly surprised by how well it was made and how easy it is to work.

バイクをいじってると、原因不明の振動が気になることがときどきあります そんな時に、この製品は先端をエンジンや駆動系などに押し当てて計測するだけで、振動を定量的に数字にしてくれるので、調子が良い時と不安な時で値を比べると、異常の有無がわかるようになりました 後輪のカラカラ音が気になったので、どこから鳴っているのかをこの製品で調べたら、ギアボックスのあたりから鳴っていることがわかりました もう暫く乗ってみて、振動が激しくなるようだったらバイク屋さんに持って行きます シロートでも簡単に使えて良いと思います

A product worth the cost. The readings are although not very exact but the cost ain't much so it's worth. And the battery need to be replaced once a while

I got this handheld vibration meter to assist with maintenance tasks, and it has been very useful. The display is bright and easy to read, which is perfect for quick fieldwork. It shows data in both tabular and graph formats, making it simple to understand vibration trends. The device comes with both long and short probes, which are handy for different measurement needs. Additionally, you can use it on flat surfaces without a probe, which adds versatility. For the price, it’s a solid tool that does the job well enough for most routine inspections and maintenance. However, I did run into a few issues. One of the main problems I encountered was the occasional inconsistency in readings, particularly when measuring vibrations on certain surfaces. I also found it tricky to get reliable measurements when holding the device myself, as it picks up vibrations from your hand. The menu system can also be a bit awkward, and there are several button presses needed for simple tasks like turning the flashlight on or off. It could definitely use a more intuitive user interface. Another downside is the lack of data export functionality, which would be helpful for more detailed analysis later on. Despite these quirks, I would definitely recommend this vibration meter for anyone who needs a quick and reliable tool for vibration monitoring, just don't expect it to be perfect for every application.

説明書は英語オンリー、端末のGUIは英語・中国語 といった感じになってます。 元々この手の振動計を 必要とする方であれば、それほど困らないかな？ 細かい機能まで使いこなす場合は、言語の壁がそこ そこありそうです。 電池が付属しており即使用できます。とりあえず、 手元にあったマッサージ器で動作確認。どうしても 手の振動を拾ってしまうので正確な数値を測るのに 慣れがいるかも。ただ、手から離しテーブル等に置 いて測定を繰り返しても測定値に一貫性がないこと があったので、全幅の信頼はおけないかも。 画面もカラー表示で大きくて見やすく、すぐ使える ので簡単な測定結果をすぐに得たいといった方には オススメですが、本気のグラフデータ集めたい方と かには向かないかも。また、電池の消費が結構多い ので頻繁に使われる方は、予備電池をケースに入れ といてもいいかも。

Après l'avoir testé sur notre CNC pour trouver la source de vibration (PCNC 1100 Serie 3) les mesures sont trop chaotiques et ne permet pas de faire de la quantification. Ok pour faire des mesures qualitatives et mieux cibler la source. En considérant les limites de cet appareil, je ne crois pas qu'elle devrait avoir une valeur de 180.