ETI Environmental Technology 2128 128-Ounce Kit Lite Pour-On, High Gloss Finish

Wow. That is it. I wasn't expecting to pour this on my countertops, but after adding the mica flakes, I didn't have an option if I wanted a smooth finish. I was definitely nervous as I have very large areas to cover. I watched a ton of videos and read quite a few blogs, so I thought I was prepared. NOT! I have one very, very important piece of advice to anyone that plans on using this. Buy more than you think you need, and don't skimp on it! I thought that I didn't want to waste a lot of the product, so I went light near the edges of the countertops, resulting in a drippy, uneven feel. I repoured and the second coat and fixed some of the issues, but by then, I was running out of product near the wall. The result was an uneven pour that I was only able to correct by ordering more product, (which took a week to get), sanding and recoating everything. Make sure to cover the floors with dropcloths, because the drips make quite the mess! The end result is beautiful, but the length of time without use of the countertops was excessive, due to my miscalculations. The product is wonderful, and I love my countertops! If I had to do it again, I would definitely buy what I thought I needed, and add in an extra gallon for good measure.

I purchased this product after reading and researching several different articles/blogs/YouTube videos about re-doing formica counter tops on a budget. This product is unique in that it seals clear and stays clear, without turning yellow over time. Using the product itself was a challenge. Not for fault of the product, but because of the time frame. After mixing it, you have about 3 minutes to spread the honey texture before it gets thicker. You MUST follow all the directions. For example, mixing for more than a minute each time, steadily stirring. Mix in small portions and work one 3 foot patch at a time. This set of 2 bottles covered all my counters with enough left over to mix one last batch and spread again on thin spots near the sink. I did use a barbecue lighter to get rid of any air bubbles. Even going over the whole counter with the lighter, there were still some miniscule bubbles I missed, but it's impossible to see. The counter looks perfect. I highly recommend watching some videos of people using this before jumping in. My husband and I were fast spreading it, and we taped everything off, and yet we still had chaos when we hit the sink area and the tape/plastic came off while the acrylic was dripping everywhere. So now, for all time, our sink has a big puddle of clear acrylic in it which looks like a puddle of water! The details and tips users on Pinterest/YouTube give to use it are awesome and really made my counter turn out well.

I was very hesitant to use this product, however after buying the product I went on YouTube for an instructional video and my fears were laid to rest. The high gloss resin took my table top from a bland look to an unbelievable look. It's super easy to work with, and very forgiving as far as self-leveling. The biggest tip I can offer is to have a propane torch ready to take the air bubbles out. Use the torch fairly quickly after pouring; don't wait until it sets to do this.

We had ugly blue laminate counters that we didn’t have the budget to fix, but wanted to fix the aesthetic. I was very stressed about this due to the bad reviews about how hard this was, BUT it was so much easier than I anticipated. I watched a bunch of videos before and had the correct tools. A plastic flat edge spreader and paint brush worked wonders spreading the product. We had plenty of time to work with it until it got tacky. Definitely get a blow torch because it is a miracle worker on bubbles and imperfections. A month later and I am still happy!

We used this for our kitchen countertops after applying a Giani Countertop Paint Kit, White Diamond instead of using their included topcoat. We used 2 coats of the envirotex. Our first coat we did not use enough product and ended up having to flood coat a second coat to cover imperfections, but it worked. Followed instructions and measured exactly, but required a lot of prep work and materials. Customer service was very helpful. I would recommend watching videos and reading reviews before working with this. There is a learning curve involved. We applied with Dynatron 358 Spreader , also available at our local automotive parts store. Important to note: this coating is very reflective - it had a yellow tint until I swapped our light fixture bulbs to daylight bulbs. We followed the curing time for both coats. I do not plan to cut on the surface and plan to be cautious with placing hot items on it. It does have a scratch already from setting a tool box on it so it appears that we will need to careful with it. The 32oz size is also available at Hobby Lobby and can be purchased with a coupon, we did our second coat this way because we needed it quickly. Overall I am happy with this coating because I think it will provide durability and longevity.

This is great epoxy. I highly recommend. It does exactly what it says.

I received a gallon of a different brand as a gift. I used it for a small river table. It was very thick, I tried warming it up, but didn't help. It came out dimpled. I thought my table was ruined. I sent for the Enviro_tec. and it leveled perfectly. It saved my project with just one flood coat. I've used it in the past and it always gave me good results.

The epoxy resin arrived on schedule and there were no packaging issues. I've used both the gallon and smaller size containers of this product. The final finish is great, currently being used in a commercial establishment with no signs or wear and I've been told that daily clean-up is quick and easy. Using the epoxy takes a little bit of practice in order to get a really smooth and even surface. If the wood is dry and porous you might want to apply a couple of really thin coats to seal the surface before adding final coats. Note, I sanded the surface using 320 wt paper before adding additional coats.

Good quality