Motorcycle Helmet Chin Strap Mount for GoPro Hero 13/12/11/10/9/8/7/(2018)/6/5 Black,DJI Osmo Action 5 pro/4/3/2,Insta360 ONE R,AKASO/Campark/YI and More

This mount is honestly the most versatile one Ive seen, You can get that perfect fit on your helmet without worrying about if the adhesion would stick or whatnot. It's slightly adjustable like a school backpack but it will not disappoint when it’s on. After using it on rides I definitely love the location and it performs so well compared to other mounts. The only thing I noticed was with my helmet at the bottom under the chin area there this like rubber flap and it fold it over to mount it allowing more air to flow into the helmet but its not that bad overall. It’s really easy to use as long as you know how to buckle something, I prefer this over traditional adhesion mounts.

I am getting into GoPro recording my motorcycle rides and was looking for a mount that didnt make my helmet look so stupid with it comimg out the side so far. Or like a train whistle on top. Handlebar mount is out because of the engine vibration. This was a great answer for little cost. The elastc straps hold the camera on super steady and out of the way. The blue backing flexes and keeps the camera in place. Although the straps dont let the visor close all the way, I like the additional bit of airflow. Very happy with my purchase.

I like this product predominantly for the reason that it is easy to put on and take off. It fits where you want the image to line up. Here is the kicker though. If you have a tight helmet, have an airflow vent, or have a modular helmet you might have issues. The airflow, depending on the location of your vents or intake, can suffer greater restriction. Your release for the chin guard on a modular helmet can be obstructed. Your helmet can be just fit for your face till you put this on, now you are forever kissing the straps and not able to open your mouth to breathe. Take these into consideration before you buy. Not a complaint on my part, but I know some people will have an issue with these areas depending on their helmet options. I have 2 helmets. One helmet is sized a little bigger for me, and there is no issue for fitment, but the helmet has noise leakage so it sucks for long distance rides. My other helmet just fits my head, but all the issues stated above are present, but the helmet works well for long distance rides due to noise reduction.

I purchased 3 chin mounts at once because I wasn't sure which one would be best. This one was by far the best. It has easy-click buckles that don't interfere much. The best part about it is that the blue rubber backing which contacts the helmet is long and grippy enough that you can curve it under the lower lip of the chin bar on a street bike helmet, so that the mount sits very low and the GoPro is much less in your line of sight (see photo). This is really helpful if you use a protective housing for the GoPro because the protective housing has a bottom hinge in the back that noticeably limits how far back (upward) you can tilt the camera with just about every hinge type, which otherwise would force you to place it higher on the chin bar (hard to explain, you'll understand if you get a housing). The other similar chin mount from Lupholue had rubber backing that didn't allow quite as much flexibility in placement, and its straps were harder to adjust and a lot longer, with flappy loose ends. The MotoRadds chin mount, which is basically an adhesive bar, did not work at all for my helmet - didn't stay on at all and it was more than twice as expensive as this mount. This mount comes with a low-profile screw on its lower hinge and a separate thumbscrew. You could use the supplied thumbscrew to attach your GoPro or replace the low-profile screw with the thumbscrew and attach the GoPro with the thumbscrew that comes with your camera or housing. The downside of any mount like this is that you can't use a breath guard or chin curtain that might have come with your helmet.

Can’t speak if it will fit other helmets, I also have two Scorpions and a HJC which have the 3M double tape action camera mounts but it does fit my Veemar helmet perfectly it has a triangular front shape that made mounting a standard action camera not possible, had no issues with the shield not closing properly, strapping it to the helmet, feels sturdy and secure the length of the straps are perfect for my helmet giving it a snug fit. Looks to be good quality, time will tell how well it will hold up? Finally I’ll be able to use my Veemar helmet with an action camera!

As I previously returned my first one due to it not holding the GoPro steady, I bought the sticky mounts to try and they wouldn’t fit my helmet. So I did purchase a second one of these and figured I could just do a diy modification to keep the GoPro in place. Does it does work for atleast one 2 hour ride yes however it does get 3 stars due to me having to modify it to actually serve its purpose. If the new one don’t have the same issues as the first one I had I will update the review.

I love this GoPro mount! It provides an unbeatable POV angle. It is very tight of a fit but as soon as you manage to get it on it is super stable!

I was searching for hours for a GoPro mount that would fit on my Shark modular helmet and this one met every mark! (X-shaped) I commute on my bike every day and I've had this installed for a few months with zero issues. It took a few minutes to get it set up but once I did it wasn't going anywhere. The silicone backing prevents slipping. I like that I can adjust the frame and even switch between landscape and portrait mode without taking my helmet off. Plus, the screw that came with this is better than the other ones I have for my GoPro. Being able to use a screwdriver to tighten or loosen it has been a game changer! This mount doesn't interfere with my helmets function at all! It goes around my release button, my vents, and my visor can still completely close. The only think I can't do is flip down my chin curtain but I drive in the city so it's okay. I don't notice I have it on most days. If you have a modular helmet get this mount!

This hin Mount works perfectly for all types of helmets, Motocross, ATV, snowmobile or motorcycle helmets. I am very pleased with it! Used it this weekend whiled quadding off road with my ATV and it held perfectly! Super happy, would definitely recommend !

Fits avg helmet snug but know the lid will not fully close due to straps blocking pathway, could be another way to loop through a vent. Insta360 ace pro 2 fits the connector snug and it tightens into place. Too cold to test on the road yet. So far I like it better than gluing something to expensive helmet with a risk of it falling off.

Decent gopro mount, using it on my dirt bike helmet, fit like a charm and has been mounted for over 1,000km without coming loose.

Very low quality. Cant close the visor when installed. The strap is also very poorly designed.

I use this to record on my suzuki. I don't know it depends on the helmet you're wearing it's 50/50. There's better systems out there but this is cheap and it's good and I don't think I'll be upgrading anytime soon. Leaves a lot to be desired because of just how hard it was to figure out how to make it sturdy and properly tighten it. And even then it's still loose but it's easy to install but it doesn't stick to your helmet at all. It functions okay leaves a lot to be desired again but the footage I get isn't too bad when I'm not speeding or going fast. When that bike is revving and it's shaking this no good. You just need something to record for insurance it's okay but you won't be looking good wearing this