Geeetech Silk PLA Filament 1.75mm for 3D Printer, Metal-Like Shiny 3D Filament 1kg (2.2lbs) 1 Spool, Dimensional Accuracy +/- 0.02 mm, Metallic Silver Silk Filament

I’ve been 3D printing long enough to be picky about filament, especially silk PLA, and this Geeetech Silk PLA in Gold completely exceeded my expectations. Right out of the box, the gold silk color is excellent — rich, glossy, and consistent without looking cheap or overly yellow. Once printed, the finish has that smooth, reflective silk sheen you want, and it really makes decorative prints, accents, and display pieces stand out. Layer lines are visually minimized, which is exactly why I reach for silk PLA in the first place. Packaging was another pleasant surprise. The spool arrived airtight sealed with desiccant, which tells me the seller actually cares about moisture control. That’s especially important with silk PLA, and it showed during printing — no popping, no stringing from moisture, and no surface defects. One thing I noticed immediately was that the spool looked slightly smaller than most others I’ve used. At first I was a bit skeptical, but once I weighed it, it measured out exactly as it should. My guess is the filament is wound more tightly or is slightly denser — either way, it’s honest labeling and full weight, which I appreciate. For printing, I’m using a Bambu Lab P1S with a first-generation AMS, and I kept things simple by selecting the Generic PLA Silk profile. I didn’t need to tweak a single setting. The filament fed perfectly through the AMS, adhered well to the build plate, and printed flawlessly from start to finish. No clogs, no under-extrusion, no weird surface artifacts — just clean, reliable prints. Overall, this filament delivered on every front: appearance, packaging, print quality, and reliability. It’s rare to find silk PLA that looks this good and prints this easily without tuning. I’ll absolutely be buying from this seller again, and I’d recommend this Geeetech Silk PLA to anyone looking for a high-quality gold filament that just works great!

I am really impressed with this Geeetech silk gold PLA. I grabbed it on a whim for a Christmas tree star and it ended up looking way nicer than I expected. The color is a rich metallic gold that actually looks like a real ornament, not cheap plastic. In person it has a smooth shiny finish that catches the lights on the tree perfectly. I printed a big five point star with long thin tips on my Flashforge Adventurer 5M and it handled the geometry like a champ. No clogging, no weird jams, and the layers came out clean and consistent. The sharp tips stayed solid instead of going mushy or curling up, and the layer lines almost disappear once the light hits the silk finish. I did not have to fight with the settings much at all. Once I dialed in a reasonable temperature and speed it just ran and finished the whole print without drama. Adhesion to the bed was solid and the part popped off clean once it cooled. If you want a gold filament for decorations, cosplay pieces, or anything that needs that bright metallic look, this stuff is absolutely worth it. Easy to print, looks fantastic, and I would happily buy it again. Five stars.

Ran full orca calibrations. 250C was solid, maybe a bit high, but still gave great prints. Kids wanted a dragon and egg, and looked great. Light stringing but quality prints. No distortions. Ran a few benchies. Boat was flawless. Voron cube came out great. Torture test want had for the ECC and this filament. Totally worth the money paid.

Seems to be good filament. I Printed a Benchy and Only the roof was a color change. I would have preferred a faster range of colors. Printed well with no issues. Colors are good. Would recommend.

When it prints right it looks great! I have printed many awesome things with this first try. Only issue is it seems slightly too brittle and hard to print for any fine detail prints which is a shame since I planned on using the gold for small halos on top of an angel figure. The best print i got has a variation in thickness of 1mm which is alot But that geometry without supports isn't super easy for any filaments. It doesn't have the best layer adhesion, i brushed the one in the photos slightly too hard and the halo broke off towards the bottom where i ended up superglueing it back. The Halo was maybe twice the thickness of spaghetti but even easier to crumble. Definitely not an amazing filament for printing small details like a halo but great for ones without the small details The photo of the angel is after doing every calibration print I could, making sure it was completely dry and probably my 10th-15th try, which was my best one BTW Geeetech is an amazing company though that cares about its customers and providing the best products, they contacted me on their own terms about my struggles with printing the halo and listened to my feedback. They passed along my concerns to the factory where they will see about fixing the issues i had and ensure they are selling the best products they can as well as made sure they did everything they could to compensate me for the trouble i had with the filament without me having to ever ask. you can trust that if you order from them they will do everything they can to make sure your experience is good so you don't ever have to worry when buying from them.

GEEETECH is my go to PLA but never tried matte but have had some problems with painting prints and Matte was suggested as a good base for painted prints . The print quality is great as expected but with out the shine so when painting the pant actual took to the print rather than "pooling"

An unbeatable price for a VERY good and precise filament! I don't even notice any difference with more pricier competitors. So, I continue buying this filament per set of 2 spools.

I'd call it a 'deep' green and blue. Does good overhangs, isn't saturated when it arrived, does have a large inner diameter so needed an adapter for A1 AMS, good layer adhesion... Pretty impressive 👍

Exelent filament. Utilisé pour la réalisation de tee de footgolf, donc une pièce qui se prends des coups de pieds et se fait marcher dessus ! Les tee imprimés résistent bien, restent souple et gardent leur forme.

Testé ce jour avec une extrusion à 200° et bed à 60°, les impressions sont au top, la couleur est conforme à la photo petit plus un sac avec zip est fourni dans l'emballage ça permettra de garder la bobine à l'abri de l'humidité. Je recommande. Juste une explication de la note : Le bobinage fait un peu peur au déballage mais pas de soucis de filament emmêlé.