Stepper Motor Controller PWM Pulse Signal Generator Speed Regulator Board,DC 15-160V/5-12V
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7Thumbnail 8

Stepper Motor Controller PWM Pulse Signal Generator Speed Regulator Board,DC 15-160V/5-12V

4.7/5
ID del producto: 130991040
Transacción segura
Comprados juntos con frecuencia

Descripción

  • Power supply: 15-160VDC or 5-12VDC. If you are using 5-12VDC power, positive end connect DC 5-12V Input, negative end connect Common Cathode End.
  • 3 Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ
  • To control the stepper motor, mus connect to the driver
  • PUL + and PUL- pulsed positive and negative; EN + and EN- is to enable the positive and negative terminals; DIR + and DIR- are the positive and negative directions.
  • Frequency of measurement can amount PUL and common cathode terminal (GND) two ports.

Specification: Power supply voltage: 15-160V / 5-12V Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ Size: Approx. 73 x 51 x 37mm / 2.87 x 2 x 1.45inch Weight: 50g Quantity: 1pc Package List: 1 x PWM Generator Note: If you use to start or stop the function, ENA controller enable terminal must be connected to common cathode or common anode drive.

Reseñas

4.7

Todo de compras verificadas

S**M

Very effective as stepper motor controller

Product is very good at generating pulse signals for stepper motor control. Three speed ranges make it easy to get the correct speed for application.The downside is that there are NO INSTRUCTIONS beyond what's listed in the Amazon product description. Thus you're never quite sure you've interpreted the few little cryptic comments correctly as you hook the thing up. The lack of any information about how it actually works has made me a bit hesitant to try it as a PWM generator to run a DC motor. Switching from pulse generation (stepper motor) to PWM (DC motor??) is done via a little jumper on the board. I'm assuming the device has virtually no current capacity so I would only use it as a signal generator.The other negative feature is that I have not figured out a way to mount the thing in an enclosure to protect it in a metal shop environment. If it's enclosed, there's no way to get to the push buttons which control "enable" and "direction."But after fiddling around with an Arduino set-up to run my stepper motor, I found this device to be much more satisfactory and much more stable than my Arduino in a shop environment.

Preguntas comunes

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Alí H.

Envío rápido y embalaje excelente. La herramienta Leatherman parece de primera calidad y resistente.

Hace 1 día

El rey F.

Tienda muy confiable con productos genuinos. ¡Seguro que volveré a comprar!

Hace 2 semanas

Compre globalmente, ahorre con Desertcart
Valor por dinero
Precios competitivos en una amplia gama de productos.
Compre globalmente
Sirviendo a millones de compradores en más de 100 países
Protección mejorada
Opciones de pago confiables que adoran los compradores de todo el mundo
Garantía del cliente
Opciones de pago confiables amadas por los compradores de todo el mundo.
Aplicación DesertCart
Compre sobre la marcha, en cualquier momento y en cualquier lugar.

Actualmente agotado

Nicaraguaalmacenar

Lo sentimos, este artículo de nuestro Nicaragua La tienda está agotada. Estaremos reabasteciendo pronto: vuelva a consultar o comuníquese con el soporte técnico para productos similares.

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Meera L.

Transacción sin problemas y el producto llegó en perfectas condiciones.

Hace 3 semanas

Por Vikram D.

La funda MOLLE es de una calidad excepcional. Estoy muy satisfecho con mi compra.

Hace 2 semanas

Stepper Motor Controller Pwm Pulse Signal Generator Speed Regulator Board | Desertcart Nicaragua