Finish Line 1-Step Cleaner and Lubricant

Cleans and lubricates chain as advertised. Be careful with drip. Clean over bark or place a newspaper underneath.

I switched to this cleaner/lubricant a little over a year ago. I was using the spray can but that made it a little difficult to keep the spray off of my rims. Which in turn would then get onto my brake pads. I am now using the squeeze bottle. It is much easier to apply the oil directly on my chain without getting it on other areas of the bike. Just apply some drips on the chain then wipe hard with a rag or shop towel. Rotate the chain and repeat. Wipe down and clean the buildup off the jockey rollers (plastic). Then just before your ride apply again but do not wipe as hard. Start out your ride by changing through all of your gears. This will do a good job of lubricating the gears. Of course, if your chain, gears and all are quite dirty or have build-up, you should clean them first. I find that I now mainly ride on paved trails and street, I don't have as much dirt build up. So, I use this to clean and lube twice a year and it works great. I ride approximately 700 miles a year.

Finish Line products are great. You get cleaner and lubricant all in one bottle for use on your bike chain works great

This chain cleaner for rust works well for cleaning rust but does not remove all rust or clean the totally

Fast shipment. Quality product thats easy to use. One step to clean and lube your chain. Works as described.

Works as described, good stuff.

Finish Line 1-Step bicycle chain and drivetrain lubricant cleaner is worth the money for speed and quality of the product. Has a pleasant smell. Comes in a propellant can that either broadly spray, or pinpoint spray with included spray tip tube.

Does a good job of cleaning and lubricating my bicycle's chain. There has to be something absorbent behind to chain to catch the overspray. I always lube the chain with Finish Line Full Synthetic Wet Bike Lubricant after using this to give my chain extra protection.