2pcs Replacement 3D Controller Joystick Axis Analog Sensor Module for Playstion 4 PS4r Playstion 4 PS4 3D Analog Sensor Module
Thumbnail 1Thumbnail 2

2pcs Replacement 3D Controller Joystick Axis Analog Sensor Module for Playstion 4 PS4r Playstion 4 PS4 3D Analog Sensor Module

4.0/5
ID del producto: 113738150
Transacción segura
Comprados juntos con frecuencia

Descripción

  • Supported models : PS4 /PS4 slim /PS4 Pro Package Include : 2 X 3D Analog Stick Please compare the picture and the description carefully. Make sure you get what you need Analog Stick Joystick Repair Parts for PS4

Reseñas

4.0

Todo de compras verificadas

T**N

Works for PS4 controller

I was having that left stick sprint problem, which can be game breaking for certain games. I decided to give this a try since it would be cheaper than buying a new controller. Plus, this was my controller that came with my Star Wars Ps4 Pro so I didn't want to give it to the trash can just yet.I was a little limited in my supplies, so this is what I did. I used a weller soldering iron, solder sucker (cheap blue/silver one on here that comes with 3 suckers and 2 copper braids), and some flux core 60/40 solder, and a helping hands tool.1. Set everything up using a "helping hands" that I got from harbor freight.2. Remove some solder from contact points (I didn't have any flux so I added some solder that had flux in it when using the solder sucker to remove solder from the contacts).3. At this point I was having trouble getting the joystick off, so I took the green parts that are on two edges of the joystick, and with a little force you can pry them away from the joystick and wiggle them back and forth until they snap off. This gives you room to use the solder sucker from one side and the iron on the other to hopefully clear the hole.4. On any of those 6 holes that didn't clear yet, I used copper braid to remove at least the metal piece that was sticking out of the hole. You might need to get creative.5. At this point if you have a heat gun (or even before this point) you might be able to use it to heat the solder and remove the old joystick. I didn't so I had to improvise. While the board was in the helping hands, I put the blade of my leatherman underneath the part and slowly worked the part off the board while heating the solder points on the other side. This was a slow process that you don't want to rush and risk overhewting your board. My method was a little MacGyver but it did in fact work.6. Use the solder sucker to remove any extra solder from the holes. Clean the board with rubbing alcohol and a toothbrush if you have one.7. Carfully put the new part on and match up all the holes to the contacts on the joystick. Be carful, you don't want to mess up now that 90% of the hard work is already done. I used a dental pick to adjust a couple of the strays while applying a little pressure.8. Solder all the points and check for any bridges. At this point I did one last clean and inspection before putting the controller back together.I had my soldering iron set to 700F most of the time. You could probably go a little down, but my theory was that the less time I'm putting contact on the board, the less heat will absorb and hurt the chips. If there is ever a time your solder on the board won't melt, try adding a little fresh solder.Good Luck

D**K

Worse than broken stock module

They look similar to the stock ps4 controller modules and they fit well. However the sticks are very stiff and way too sensitive. There seems to be a large deadzone in the center as well. It is impossible to do small joystick movements because of this.These are poor knockoffs and I would not recommend them.

P**S

Still working well in the PS3 remotes I fixed

had to fix my gfs ps3 remotes... while nobody said this was right, it looked identical to the joystick sensor I pulled out. Itbl worked! Here we areb6 months later, it is still working, albeit mostly for Netflix, not for tons of heavy gaming.If its what you need, it'll do the job!

A**Z

Need these to replaced drift problem on PS4 controller .

I need this parts to replaced the original 3D Joystick axis analog sensor module . The original parts have a drift problem and act weird too . This 3D Joystick axis analog sensor module work fine on my PS4 controller so far need to use a bit longer too . I feel for the price pay for these parts are excellent too .

C**S

Worked as intended to!

Fixed the drifting issue I was having. Easier then I expected to install.

D**O

Defective

I replaced my left thumbstick with one of the replacements. L3 didn't work. I replaced that one with the other replacement stick, and L3 didn't work. These products are defective and not worth the time to desolder and install these. Don't waste your time. Just buy a new controller.

S**N

Different than original

These are not the exact same as the original. Slight difference.

R**H

Excellent!

Item seems to be an oem replacement for the ps4 controller. Just an FIY, this isn’t a plug and play module, you need to solder it on. Everything is smooth and works perfectly after install.

Preguntas comunes

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

1. Suresh K.

Me impresionó mucho la calidad y la entrega rápida. Volveré a comprar aquí.

Hace 4 días

Anjali K.

La calidad del producto es excelente. Exactamente lo que necesitaba para mi trabajo.

Hace 1 mes

Compre globalmente, ahorre con Desertcart
Valor por dinero
Precios competitivos en una amplia gama de productos.
Compre globalmente
Sirviendo a millones de compradores en más de 100 países
Protección mejorada
Opciones de pago confiables que adoran los compradores de todo el mundo
Garantía del cliente
Opciones de pago confiables amadas por los compradores de todo el mundo.
Aplicación DesertCart
Compre sobre la marcha, en cualquier momento y en cualquier lugar.
C$1382

Derechos e impuestos incl.

Nicaraguaalmacenar
1
Envío gratis

with PRO Membership

Devoluciones gratuitas

30 diaspara usuarios de membresía PRO

15 diassin membresía

Transacción segura

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Por Ravi S.

Me encantó la variedad de productos disponibles. Definitivamente volveré a comprar.

Hace 2 meses

Por Neha S.

Excelente comunicación durante todo el proceso de pedido. El producto es perfecto.

Hace 2 semanas

2pcs Replacement 3d Controller Joystick Axis Analog Sensor Module Playstion | Desertcart Nicaragua